DOI QR코드

DOI QR Code

A study on the factors influencing the segment lining design solved by beam-spring model in the shield tunnel

쉴드 터널 세그먼트 라이닝 설계에서 빔-스프링 구조 모델이 단면력에 미치는 영향

  • Kim, Hong-moon (Dept. of Geotechnical Engr., Pyunghwa Engineering Consultants Ltd.) ;
  • Kim, Hyun-su (Dept. of Geotechnical Engr., Pyunghwa Engineering Consultants Ltd.) ;
  • Shim, Kyung-mi (Dept. of Geotechnical Engr., Pyunghwa Engineering Consultants Ltd.) ;
  • Ahn, Sung-youll (SYTEC Co., Ltd.)
  • Received : 2017.03.07
  • Accepted : 2017.03.16
  • Published : 2017.03.31

Abstract

The segment lining design for shield tunnel is generally carried out by using the beam-spring model and the induced member forces from the model are strongly influenced by the components of the model such as imposed load, coefficient of subgrade reaction, location of segment joint and its stiffness. The structural models and stiffness of its connection part found used in abroad design cases is usually obtained as it is for the domestic design of segment of shield tunnel. Those models and stiffness in existing design cases are conventionally applied to a new tunnel design without any suitability review for the project. In this study, the application method of base components of the model such as the coefficient of subgrade reaction and modelling method to the segment lining design was suggested by carrying out the comparative study of the base elements for the member forces estimation of segment lining of shield tunnel.

쉴드터널의 세그먼트 라이닝 단면 설계는 일반적으로 빔-스프링 모델을 사용하여 이루어지며, 산정되는 단면력은 모델구성요소인 작용하중, 지반반력계수, 세그먼트 조인트 위치 및 강성 등의 영향을 받는다. 국내 쉴드터널 세그먼트라이닝의 설계는 해외에서 사용되고 있는 구조해석 모델과 이음부 강성을 주로 이용하고 있으며, 기존 설계에서 사용하고 있는 구조해석 모델이나 조인트 강성을 적합여부 검토 없이 관행적으로 사용해오고 있다. 본 연구에서는 쉴드터널 세그먼트 라이닝의 부재력을 산정하기 위해 필요한 지반반력계수, 모델링 방법 등 빔-스프링 모델의 기본 구성요소들에 대한 비교 검토를 통하여 세그먼트 라이닝 설계법을 구성하는 기본 요소들의 적용방법을 제안하였다.

Keywords

References

  1. Lee, Y.J., Lee, H.S., Chang, S.B., Kim, W.S. (2010), "A Study on the Design of Shield Tunnel Segment Lining Structure", Journal of Yooshin Technology, Vol. 17. pp. 106-116.
  2. Choi, W.Y., Park, J.D., Lee, S.W. (2014), "Influence of the joint stiffness on the segment design", Journal of Korean Tunnelling and Underground Space Society, Vol. 16, No. 1, pp. 63-74. https://doi.org/10.9711/KTAJ.2014.16.1.063
  3. Yoo, C.S., Jeon, H.M. (2012), "A comparative study on methods for shield tunnel segment lining sectional forces", Journal of Korean Tunnelling and Underground Space Society, Vol. 14, No.3, pp. 159-181. https://doi.org/10.9711/KTAJ.2012.14.3.159
  4. Muir Wood. A. M., MA, FICE (1975), "The circular tunnel in elastic ground", Geotechnique 25, No.1, pp. 115-127. https://doi.org/10.1680/geot.1975.25.1.115
  5. Korea Expressway Corporation (2009), "Manual of Road Design", pp. 176.
  6. Korean Tunnelling and Underground Space Society (2008), "The Mechanization construction of tunnel- Design part", pp. 486-489.
  7. 日本鐵道總合技術硏究所 (2003), "鐵道構造物等設計標準.同解說(シ一ルドトンネル)", pp. 91-95.
  8. JSCE (2010), "Segment design(Revision)-To limit state design method from the allowable stress design method", Maruzen.
  9. Terzaghi, K. (1943), "Theoritical Soil Mechanics", John Wiley and Sons, New York.
  10. Ju-Young Oh, Martin Ziegler (2014), "Effect of tail void grouting on the surface settlements in soil of low permeability", pp. 1-9.
  11. Jon Hurt, Andrew Cheng, Christopher Fesq, Nathan Wilmot & Cedric Wong , Rob Harding, Karen Cheung (2010), "Soft Ground Tunnel Lining Design Guide", pp. 13-27.
  12. ITA, Working Group No. 2. (2000), Guidelines for the Design of Shield Tunnel Lining. Tunnelling and Underground Space Technology, Vol. 15, No. 3, pp. 305.
  13. The British Tunnelling Society (2004), "Tunnel Lining Design Guide", pp. 100-107.
  14. FHWA (2009), "Technical Manual for Design and Construction of Road Tunnels - Civil Elements", pp. 10-1-10-16.