산업기술연구 (Journal of Industrial Technology)

  • 제37권1호
  • /
  • Pages.1-4
  • /
  • 2017
  • /
  • 1229-9588(pISSN)
  • /
  • 1598-1371(eISSN)
강원대학교 산업기술연구소 (Kangwon National University, Institute of Industrial Technology)
권호 표지
DOI QR코드

DOI QR Code

발포 알루미늄 샌드위치 패널의 차음성능

Sound Insulation Performance of the Foamed Aluminum Sandwich Panel for a Railway Vehicle

  • Ahn, Yong-Chan (Unison Engineering Co., Ltd., Deamyeong Valleyon Knowledge Industry Center) ;
  • Lee, Joong-Hyuk (Department of Advanced Mechanical Engineering, Kangwon National University) ;
  • Byeon, Jun-Ho (Department of Advanced Mechanical Engineering, Kangwon National University) ;
  • Kim, Seock-Hyun (Department of Mechatronics Engineering, Kangwon National University)
  • 투고 : 2017.02.21
  • 심사 : 2017.08.21
  • 발행 : 2017.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Speeding up of railway vehicles requires weight reduction of the vehicle body. However, when the vehicle body is lighter, the sound insulation performance for blocking the noise from the outside is reduced. Aluminum is an important material used in the bodywork of transportation vehicles such as railway vehicles, aircraft, and automobiles. In this study, the bending stiffness and sound insulation performance of foamed aluminum with sandwich structure are investigated experimentally. The transmission loss is measured in accordance with the international standard ASTM E 2249-02. The mass-law deviation is used to evaluate the sound insulation performance per weight. In order to examine the applicability of the foamed aluminum sandwich panel to railway vehicles, the analysis of bending stiffness and an experimental review are carried out at the same time.

키워드

참고문헌

  1. Carl E. Hanson, P.E., Jason C. Ross, P. E., David A. Towers, P.E., 2005, High-Speed Ground Transportation Noise and Vibration Impact Assessment, U. S. Department of Transportation.
  2. Hur, B. Y., Eom, Y. S., Kim, S. Y., 2004, Development of Fabrication Technology for Al Foam with Lightweight-Strength, Trends in metals & materials engineering.
  3. ASTM, 2003, ASTM E 2249 - 02, ASTM E 2249 - 02.
  4. Davies, G. J., Zhen, S., 1983, Metallic foams: their production, properties and applications, Journal of Materials Science.
  5. Beranek, L. L., Ver, I. L., 1992, Noise and Vibration Control Engineering, John Wiley and Sons, INC.
  6. Kim, S. H., Jang, H., Kim, J., 2001, Characteristics of Local Vibration Modes of the Aluminum Extruded Panels for Rail Road Vehicles, Journal of the Korean Society for Railway.
  7. Kim, S. H., Paek, I. S., Lee, H. W., Kim, J. T., 2008, Prediction Model of the Sound Transmission Loss of Honeycomb Panels for Railway Vehicles, Journal of the korean Society for Railway.
  8. Kim, S. H., Seo, T. K., Kim, J. T., 2010, Improvement effect of the Sound Insulation Performance of the Corrugated Steel Panel by Sound Absorbing and Damping Materials, Journal of the Korean Society for Railway.
  9. Kim, S. H., Lee, H. W., Kim, J. T., Kim, J. C., 2010, Sound Insulation Design of the Corrugated Steel Panel Considering Local Resonance, Journal of the KSNVE.
  10. Timoshenko, S. P., Krieger, S. W., 1958, Theory of Plates and Shells McGraw-Hill.