DOI QR코드

DOI QR Code

Experimental study on axial compressive behavior of hybrid FRP confined concrete columns

  • Li, Li-Juan (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Zeng, Lan (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Xu, Shun-De (School of Civil and Transportation Engineering, Guangdong University of Technology) ;
  • Guo, Yong-Chang (School of Civil and Transportation Engineering, Guangdong University of Technology)
  • Received : 2013.05.28
  • Accepted : 2017.01.10
  • Published : 2017.04.25

Abstract

In this paper, the mechanical property of CFRP, BFRP, GFRP and their hybrid FRP was experimentally studied. The elastic modulus and tensile strength of CFRP, BFRP, GFRP and their hybrid FRP were tested. The experimental results showed that the elastic modulus of hybrid FRP agreed well with the theoretical rule of mixture, which means the property of hybrid composites are linear with the volumes of the corresponding components while the tensile strength did not. The bearing capacity, peak strain, stress-strain relationship of circular concrete columns confined by CFRP, BFRP, GFRP and hybrid FRP subjected to axial compression were recorded. And the confinement effect of hybrid FRP on concrete columns was analyzed. The test results showed that the bearing capacity and ductility of concrete columns were efficiently improved through hybrid FRP confinement. A strength model and a stress-strain relationship model of hybrid FRP confined concrete columns were proposed. The proposed stress-strain model was shown to be capable of providing accurate prediction of the axial compressive strength of hybrid FRP confined concrete compared with Teng et al. (2002) model, Karbhari and Gao (1997) model and Miyachi et al. (1999) model. The modified stress-strain model was also suitable for single FRP confinement cases and it was so concise in form and didn't have piecewise fitting, which would be easy for use in structural design.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Guangdong Provincial Transportation Department

References

  1. Bouchelaghem, H., Bezazi, A. and Scarpa, F. (2011), "Compressive behaviour of concrete cylindrical FRP-confined columns subjected to a new sequential loading technique", Compos. Part B-Eng., 42(7), 1987-1993. https://doi.org/10.1016/j.compositesb.2011.05.045
  2. Chen, G.M., Chen, J.F. and Teng, J.G. (2012), "Behaviour of FRPto-concrete interfaces between two adjacent cracks: A numerical investigation on the effect of bondline damage", Constr. Build. Mater., 28(1), 584-591. https://doi.org/10.1016/j.conbuildmat.2011.08.074
  3. Chen, Z.F., Wan, L.L. and Lee, S. (2008), "Evaluation of CFRP, GFRP and BFRP material systems for the strengthening of RC slabs", J. Reinf. Plast. Compos., 27(12), 1233-1243. https://doi.org/10.1177/0731684407084122
  4. Djeddi, F., Ghernouti, Y., Abdelaziz, Y. and Alex, L. (2016), "Strengthening in flexure-shear of RC beams with hybrid FRP systems: Experiments and numerical modeling", J. Reinf. Plast. Compos., 35(22), 1642-1660. https://doi.org/10.1177/0731684416662532
  5. Farids, M.N. and Khalili, H. (1982), "FRP-encased concrete as a structural material", Mag. Concrete Res., 34(121), 191-202. https://doi.org/10.1680/macr.1982.34.121.191
  6. Guo, Y.C., Huang, P.Y., Yang, Y. and Li, L.J. (2009), "Experimental studies on axially loaded concrete columns confined by different materials", Key Eng. Mater., 400(10), 513-518.
  7. Guo, Y.C., Li, L.J., Chen, G.M. and Huang, P.Y. (2012), "Influence of hollow imperfections in adhesive on the interfacial bond behaviors of FRP-plated RC beams", Constr. Build. Mater., 30(5), 597-606. https://doi.org/10.1016/j.conbuildmat.2011.11.039
  8. Hai, N.D. and Mutsuyoshi, H. (2012), "Structural behavior of double-lap joints of steel splice plates bolted/bonded to pultruded hybrid CFRP/GFRP laminates", Constr. Build. Mater., 30(5), 347-359. https://doi.org/10.1016/j.conbuildmat.2011.12.001
  9. Hosny, A., Shaheen, H., Abdelrahman, A. and Elafandy, T. (2006), "Performance of reinforced concrete beams strengthened by hybrid FRP laminates", Cement Concrete Compos., 28(10), 906-913. https://doi.org/10.1016/j.cemconcomp.2006.07.016
  10. Karbhai, V.M. and Gao, Y. (1997), "Composite jacketed concrete under uniaxial compression-verifi cation of simple design equations", J. Mater. Civil Eng., 9(4), 185-193. https://doi.org/10.1061/(ASCE)0899-1561(1997)9:4(185)
  11. Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Constr. Build. Mater., 17(6-7), 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X
  12. Lau, D. and Pam, H.J. (2010), "Experimental study of hybrid FRP reinforced concrete beams", Eng. Struct., 32(12), 3857-3865. https://doi.org/10.1016/j.engstruct.2010.08.028
  13. Li, D., Du, F., Chen, Z. and Wang, Y. (2016), "Identification of failure mechanisms for CFRP-confined circular concrete-filled steel tubular columns through acoustic emission signals", Smart Struct. Syst., 18(3), 525-540. https://doi.org/10.12989/sss.2016.18.3.525
  14. Li, J., Samali, B., Ye, L. and Bakoss, S. (2002), "Behaviour of concrete beam-column connections reinforced with hybrid FRP sheet", Compos. Struct., 57(1-4), 357-365. https://doi.org/10.1016/S0263-8223(02)00102-2
  15. Li, L.J., Guo, Y.C., Huang, P.Y., Liu, F., Deng, J. and Zhu, J. (2009), "Interfacial stress analysis of RC beams strengthened with hybrid CFS and GFS", Constr. Build. Mater., 23(6), 2394-2401. https://doi.org/10.1016/j.conbuildmat.2008.10.006
  16. Mahdikhani, M., Naderi, M. and Zekavati, M. (2016), "Finite element modeling of the influence of FRP techniques on the seismic behavior of historical arch stone bridge", Comput. Concrete, 18(1), 99-112. https://doi.org/10.12989/cac.2016.18.1.099
  17. Meier, U., Deuring, M., Meier, H. and Schwegler, G. (1993), Strengthening of Structures with Advanced Composites, Alternative Materials for Reinforcement and Prestressing of Concrete, Clarke, Chapman & Hall, Glasgow, Scotland.
  18. Miyauchi, K., Inoue, S., Kuroda, T. and Kobayashi, A. (1999), "Strengthening effects of concrete columns with carbon fiber sheet", J. Trans. Jpn. Concrete Inst., 21(2), 143-150.
  19. Mosallam, A., Taha, M.M.R., Kim, J.J. and Nasr, A. (2012), "Strength and ductility of RC slabs strengthened with hybrid high-performance composite retrofit system", Eng. Struct., 36(3), 70-80. https://doi.org/10.1016/j.engstruct.2011.11.022
  20. Padanattil, A., Karingamanna, J. and Mini, K.M. (2017), "Novel hybrid composites based on glass and sisal fiber for retrofitting of reinforced concrete structures", Constr. Build. Mater., 133, 146-153. https://doi.org/10.1016/j.conbuildmat.2016.12.045
  21. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1928), "A study of the failure of concrete under combined compressive stresses", University of Illinois Bulletin, 26, 185.
  22. Rousakis, T.C. and Karabinis, A.I. (2012), "Adequately FRP confined reinforced concrete columns under axial compressive monotonic or cyclic loading", Mater. Struct., 45(7), 957-975. https://doi.org/10.1617/s11527-011-9810-1
  23. Saadatmanesh, H. and Ehsani, M.R. (1991), "RC beams strengthened with FRP plates II: Analysis and parametric study", J. Struct. Eng., 117(11), 3434-3455. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3434)
  24. Samaan, M., Mirmira, A. and Shahawy, M. (1998), "Model of concrete confined by fiber composites", J. Struct. Eng., 126(9), 1025-1031.
  25. Su, L., Li, X. and Wang, Y. (2016), "Experimental study and modelling of CFRP-confined damaged and undamaged square RC columns under cyclic loading", Steel Compos. Struct., 21(2), 411-427. https://doi.org/10.12989/scs.2016.21.2.411
  26. Sundarraja, M.C. and Prabhu, G.G. (2012), "Experimental study on CFST (concrete filled steel tubular) members strengthened by CFRP composites under compression", J. Constr. Steel Res., 72(5), 75-83. https://doi.org/10.1016/j.jcsr.2011.10.014
  27. Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2002), FRP-Strengthened RC Structures, John Wiley & Sons, Ltd., New York, U.S.A.
  28. Teng, J.G., Zhao, J.L., Yu, T., Li, L.J. and Guo, Y.C. (2012), "Recycling of coarsely-crushed concrete for use in FRP tubular columns", Proceedings of the 1st International Conference on Performance-Based and Life-Cycle Structural Engineering, Hong Kong, China, December.
  29. Vanaja, A. and Rao, R.M.V.G.K. (2002), "Fibre fraction effects on thermal degradation behaviour of GFRP, CFRP and hybrid composites", J. Reinf. Plast. Compos., 21(15), 1389-1398. https://doi.org/10.1177/0731684402021015780
  30. Xu, S.D. (2012), "Study on mechanical properties of concrete circular column confined by HFRP under axial compression", M.S. Dissertation, Guangdong University of Technology, China.
  31. Zhao, J.L., Teng, J.G., Yu, T. and Li, L.J. (2013), "Experimental behavior of FRP-concrete-steel double-skin tubular beams", Proceedings of the 11th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures, Guimaraes, Portugal, June.

Cited by

  1. Reliability analysis of proposed capacity equation for predicting the behavior of steel-tube concrete columns confined with CFRP sheets vol.25, pp.5, 2020, https://doi.org/10.12989/cac.2020.25.5.383
  2. Compressive behavior of circular and square concrete column externally confined by different types of basalt fiber-reinforced polymer vol.23, pp.8, 2017, https://doi.org/10.1177/1369433219898086