DOI QR코드

DOI QR Code

Reliable monitoring of embankment dams with optimal selection of geotechnical instruments

  • Masoumi, Isa (Department of Mining Engineering, Science and Research Branch, Islamic Azad University) ;
  • Ahangari, Kaveh (Department of Mining Engineering, Science and Research Branch, Islamic Azad University) ;
  • Noorzad, Ali (Faculty of Civil, Water and Environmental Engineering, Shahid Beheshti University)
  • 투고 : 2017.01.10
  • 심사 : 2017.03.27
  • 발행 : 2017.03.25

초록

Monitoring is the most important part of the construction and operation of the embankment dams. Applied instruments in these dams should be determined based on dam requirements and specifications. Instruments selection considered as one of the most important steps of monitoring plan. Competent instruments selection for dams is very important, as inappropriate selection causes irreparable loss in critical condition. Lack of a systematic method for determining instruments has been considered as a problem for creating an efficient selection. Nowadays, decision making methods have been used widely in different sciences for optimal determination and selection. In this study, the Multi-Attribute Decision Making is applied by considering 9 criteria and categorisation of 8 groups of geotechnical instruments. Therefore, the Analytic Hierarchy Process and Multi-Criteria Optimisation and Compromise Solution methods are employed in order to determine the attributes' importance weights and to prioritise of instruments for embankment dams, respectively. This framework was applied for a rock fill with clay core dam. The results indicated that group decision making optimizes the selection and prioritisation of monitoring instruments for embankment dams, and selected instruments are reliable based on the dam specifications.

키워드

참고문헌

  1. Andersen, G., Cox, C., Chouinard, L. and Hover, W. (2001), "Prioritization of ten Embankment Dams according to physical feficiencies", J. Geotech. Geoenviron. Eng., 127(4), 335-345. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:4(335)
  2. Andersen, G., Chouinard, L., Bouvier, C. and Back, W. (1999), "Ranking Procedure on Maintenance Tasks for Monitoring of Embankment Dams", J. Geotech. Geoenviron. Eng., 125(4), 247-259. https://doi.org/10.1061/(ASCE)1090-0241(1999)125:4(247)
  3. Ashtankar, V.B. and Chore, H.S. (2015), "Thermo-structural monitoring of RCC dam in India through instrumentation", Struct. Monit. Maint., 2(2), 95-113. https://doi.org/10.12989/SMM.2015.2.2.095
  4. Barai, S. and Pandey, P.C. (2004), "Knowledge based expert system approach to instrumentation selection (INSEL)", Transport, 19(4), 171-176.
  5. Bartholomew, C.L., Murray, C.B. and Goins, D.L. (1987), Embankment Dam Instrumentation Manual, U.S. Dept. of the Interior, Bureau of Reclamation.
  6. Bascetin, A. (2007), "A decision support system using analytical hierarchy process (AHP) for the optimal environmental reclamation of an open-pit mine", Environ. Geol., 52(4), 663-672. https://doi.org/10.1007/s00254-006-0495-7
  7. Bassett, R. (2012), A guide to field instrumentation in geotechnics: Principles, installation and reading, Abingdon, Oxon: Spon Press.
  8. Chavan, A.R. and Valunjkar, S.S. (2015), "A study of instruments used for dam instrumentation in gravity and earthen dams", Int. J. Eng. Technic. Res., 3(5), 355-361.
  9. Colombo, M., Domaneschi, M. and Ghisi, A. (2016), "Existing concrete dams: loads definition and finite element models validation", Struct. Monit. Maint., 3(2), 129-144. https://doi.org/10.12989/SMM.2016.3.2.129
  10. Dunnicliff, J. (1993), Geotechnical Instrumentation for Monitoring Field Performance, John Wiley and Sons, Inc., New York.
  11. Eberhardt, E. and Stead, D. (2011), Geotechnical Instrumentation, SME Mining Engineering Handbook, Ed., Peter Darling, 3rd ed. Society for Mining, Metallurgy, and Exploration (SME), Inc. 551-571.
  12. Fell, R., McGregor, P., Stapledon, D., Bell, G. and Foster, M. (2014), Geotechnical Engineering of Dams, EH Leiden,The Netherlands: CRC Press.
  13. FERC (1994), Instrumentation and Monitoring. In Engineering Guidelines for the Evaluation of Hydropower Projects. Federal Energy Regulatory Commission, Office of Hydropower Licensing, Washington DC.
  14. Gul, M., Celik, E., Aydin, N., Gumus, A.B. and Guneri, A.F. (2016), "A state of the art literature review of VIKOR and its fuzzy extensions on applications", Appl. Soft Comput., 46, 60-89. https://doi.org/10.1016/j.asoc.2016.04.040
  15. Hwang, C.L. and Yoon, K. (1981), Multiple Attribute Decision Making: Methods and Applications A State of the Art Survey. Springer-Verlag Berlin Heidelberg, New York.
  16. Jing, S., Niu, Z. and Chang, P.C. (2015), "The application of VIKOR for the tool selection in lean management", J. Intel. Manufact., doi:10.1007/s10845-015-1152-3.
  17. Kim, R.E., Li, J., Spencer, B.F., Nagayama Jr.T. and Mechitov, K.A. (2016), "Synchronized sensing for wireless monitoring of large structures", Smart Struct. Syst., 18(5), 885-909. https://doi.org/10.12989/sss.2016.18.5.885
  18. Kim, J.T., Sim, S.H., Cho, S., Yun, C.B. and Min, J. (2016), "Recent R&D activities on structural health monitoring in Korea", Struct. Monit. Maint., 3(1), 91-114. https://doi.org/10.12989/SMM.2016.3.1.091
  19. Kong, S.K. (2003), "Application of instrumentation system for safety control in basement construction works", BCA Seminar - Avoiding Failures in Excavation Works, Singapore.
  20. Kurniati, E., Sutanhaji, A.T. and Anggraini, O.A. (2013), "Land acquisition and resettlement action plan (LARAP) of Dam Project using Analytical Hierarchical Process (AHP): A case study in Mujur Dam, Lombok Tengah District-West Nusa Tenggara, Indonesia", Procedia Environ. Sci., 17, 418-423. https://doi.org/10.1016/j.proenv.2013.02.055
  21. Lee, A.H.I., Chen, W.C. and Chang, C.J. (2008), "A Fuzzy AHP and BSC approach for evaluating performance of IT department in the manufacturing industry in Taiwan", Exp. Syst. Appl., 34(1), 96-107. https://doi.org/10.1016/j.eswa.2006.08.022
  22. Li, H.N., Li, D.S., Ren, L., Yi, T.H., Jia, Z.G. and Li, K.P. (2016), "Structural health monitoring of innovative civil engineering structures in Mainland China", Struct. Monit. Maint., 3(1), 1-32. https://doi.org/10.12989/SMM.2016.3.1.001
  23. Li, H.N., Yi, T.H., Ren, L., Li, D.S. and Huo, L.S. (2014), "Reviews on innovations and applications in structural health monitoring for infrastructures", Struct. Monit. Maint., 1(1), 1-45. https://doi.org/10.12989/SMM.2014.1.1.001
  24. Machan, G. and Bennett, V.G. (2008), Use of Inclinometers for Geotechnical Instrumentation on Transportation Projects: State of practice. In Transportation research circular E-C129, Washington, DC.
  25. Masoumi, I. and Rashidinejad, F. (2011), "Preference ranking of post-mining land use through LIMA framework", 9th International Conference on Clean Technologies for the Mining Industry, Santiago, Chile.
  26. Masoumi, I., Naraghi, S., Rashidi-nejad, F. and Masoumi, S. (2014), "Application of fuzzy multi-attribute decision-making to select and to rank the post-mining land-use", Environ. Earth Sci., 72(1), 221-231. https://doi.org/10.1007/s12665-013-2948-0
  27. Mauriya, V.K. (2010), "Geotechnical instrumentation in earth and rock-fill dams", Indian Geotechnical Conference, Mumbai.
  28. Nagarajaiah, S. and Erazo, K. (2016), "Structural monitoring and identification of civil infrastructure in the United States", Struct. Monit. Maint., 3(1), 51-69. https://doi.org/10.12989/smm.2016.3.1.051
  29. Naterop, D. (2002), "Instrumentation of geotechnical structures and new technologies of information new developments in instrumentation and data management", 8th Portuguese National Congress on Geotechnical Engineering, Lisbon.
  30. Negro, Jr. A., Karlsrud, K., Srithar, S., Ervin, M.C. and Voster, E. (2009), "Prediction, monitoring and evaluation of performance of geotechnical structures", Proceedings of the 17th International Conference on Soil Mechanics and Geotechnical Engineering, Alexandria.
  31. Novak, P., Moffat, A.I.B., Nalluri, C. and Narayanan, R. (2007), Hydraulic Structures, Fourth Edition, CRC Press, New York.
  32. Opricovic, S. and Tzeng, G.H. (2002), "Multi criteria planning of post-earthquake sustainable reconstruction", Comput.-Aid. Civ. Infrastruct. Eng., 17(3), 211-220. https://doi.org/10.1111/1467-8667.00269
  33. Opricovic, S. and Tzeng, G.H. (2003), "Fuzzy multi criteria model for postearthquake land-use planning", Natural Haz. Rev., 4(2), 59-64. https://doi.org/10.1061/(ASCE)1527-6988(2003)4:2(59)
  34. Opricovic, S. and Tzeng, G.H. (2004), "Compromise solution by MCDM methods: A comparative analysis of VIKOR and TOPSIS", Eur. J. Operat. Res., 156(2), 445-455. https://doi.org/10.1016/S0377-2217(03)00020-1
  35. Opricovic, S. and Tzeng, G.H. (2007), "Extended VIKOR method in comparison with outranking methods", Eur. J. Operat. Res., 178(2), 514-529. https://doi.org/10.1016/j.ejor.2006.01.020
  36. Pate-Cornell, M.E. and Tagaras, G. (1986), "Risk costs for new dams: Economic analysis and effects of monitoring", Water Resour. Res., 22(1), 5-14. https://doi.org/10.1029/WR022i001p00005
  37. Pehlivan, H. and Bayata, H.F. (2016), "Usability of inclinometers as a complementary measurement tool in structural monitoring", Struct. Eng. Mech., 58(6), 1077-1085. https://doi.org/10.12989/sem.2016.58.6.1077
  38. Saaty, T.L. (1980), "The Analytic Hierarchy Process", McGraw-Hill, New York.
  39. Saaty, T.L. (1990), "The Analytic Hierarchy Process", McGraw-Hill, New York.
  40. Saaty, T.L. and Vargas, L.G. (1994), "Decision making in economic, political, social, and technological environments with the analytic hierarchy process", RWS Publications, Pittsburgh.
  41. Safari, M., Ataei, M., Khalokakaei, R. and Karamozian, M. (2010), "Mineral processing plant location using the analytic hierarchy process-a case study: the Sangan iron ore mine (phase 1)", Mining Sci. Technol., 20(5), 691-695. https://doi.org/10.1016/S1674-5264(09)60264-7
  42. Samaras, G.D., Gkanas, N.I. and Vitsa, K.C. (2014), "Assessing risk in Dam projects using AHP and ELECTRE I", Int. J. Constr. Manage., 14(4), 255-266.
  43. San Cristobal Mateo, J.R. (2012), Multi Criteria Analysis in the Renewable Energy Industry, London: Springer.
  44. Sarsby, R.W. (2013), Environmental Geotechnics, Second Edition, ICE Publishing, Westminster, London, United Kingdom.
  45. Sharma, R.P. and Kumar, A. (2013), "Case histories of earthen dam failures", Seventh International Conference on Case Histories in Geotechnical Engineering, Chicago.
  46. Shayesteh, K., Ghashami, S. and Mirsanjari, M.M. (2015), "A survey on earthquake risk assessment of dams and prioritization of management strategies, using AHP method (Case study: Ekbatan Dam, Hamedan, Iran)", Int. J. Farm. Allied Sci., 4(3), 189-196.
  47. Singh, S., Olugu, E.U., Musa, S.N., Mahat, A.B. and Wong, K.Y. (2015), "Strategy selection for sustainable manufacturing with integrated AHP-VIKOR method under interval-valued fuzzy environment", Int. J. Adv. Manufact. Technol., 84(1), 547-563.
  48. Solinst Canada Ltd. (2013), Model 601 Standpipe Piezometer Datasheet, http://www.solinst.com/downloads/.
  49. Su, H., Wen, Z. and Wang, F. (2016), "Fractal behavior identification for monitoring data of dam safety", Struct. Eng. Mech., 57(3), 529-541. https://doi.org/10.12989/sem.2016.57.3.529
  50. USACE (1995), Instrumentation of Embankment Dams and Levees, U.S. Army Corps of Engineers, EM 1110-2-1908, Washington, DC.
  51. Yasser, M., Jahangir, K. and Mohammad, A. (2013), "Earth dam site selection using the analytic hierarchy process (AHP): a case study in the west of Iran", Arab. J. Geosci., 6(9), 3417-3426. https://doi.org/10.1007/s12517-012-0602-x
  52. Yavuz, M., Iphar, M. and Once, G. (2008), "The optimum support design selection by using AHP method for the main haulage road in WLC Tuncbilek colliery", Tunnelling Underground Space Technol., 23(2), 111-119. https://doi.org/10.1016/j.tust.2007.02.001
  53. Yi, T.H., Zhou, G.D., Li, H.N. and Zhang, X.D. (2015), "Optimal sensor placement for health monitoring of high-rise structure based on collaborative-climb monkey algorithm", Struct. Eng. Mech., 54(2), 305-317. https://doi.org/10.12989/sem.2015.54.2.305
  54. Yu, P.L. (1973), "A class of solutions for group decision problems", Manage. Sci., 19(8), 936-946. https://doi.org/10.1287/mnsc.19.8.936
  55. Zeleny, M. (1982), Multiple Criteria Decision Making, McGraw-Hill, New York.
  56. Zeng, Q.L., Li, D.D. and Yang, Y.B. (2013), "VIKOR method with enhanced accuracy for Multiple Criteria Decision Making in healthcare management", J. Med. Syst., 37(2), 9908. https://doi.org/10.1007/s10916-012-9908-1

피인용 문헌

  1. Optimization of tailings disposal method using fuzzy analytic hierarchy process pp.1607-0798, 2019, https://doi.org/10.2166/ws.2019.028
  2. Integrated fuzzy decision approach for reliability improvement of dam instrumentation and monitoring vol.3, pp.2, 2017, https://doi.org/10.1080/24705314.2018.1461546