DOI QR코드

DOI QR Code

Crack identification with parametric optimization of entropy & wavelet transformation

  • Wimarshana, Buddhi (Department of Mechanical Engineering, University of Manitoba) ;
  • Wu, Nan (Department of Mechanical Engineering, University of Manitoba) ;
  • Wu, Christine (Department of Mechanical Engineering, University of Manitoba)
  • 투고 : 2016.07.13
  • 심사 : 2017.03.01
  • 발행 : 2017.03.25

초록

A cantilever beam with a breathing crack is studied to improve the breathing crack identification sensitivity by the parametric optimization of sample entropy and wavelet transformation. Crack breathing is a special bi-linear phenomenon experienced by fatigue cracks which are under dynamic loadings. Entropy is a measure, which can quantify the complexity or irregularity in system dynamics, and hence employed to quantify the bi-linearity/irregularity of the vibration response, which is induced by the breathing phenomenon of a fatigue crack. To improve the sensitivity of entropy measurement for crack identification, wavelet transformation is merged with entropy. The crack identification is studied under different sinusoidal excitation frequencies of the cantilever beam. It is found that, for the excitation frequencies close to the first modal frequency of the beam structure, the method is capable of detecting only 22% of the crack depth percentage ratio with respect to the thickness of the beam. Using parametric optimization of sample entropy and wavelet transformation, this crack identification sensitivity is improved up to 8%. The experimental studies are carried out, and experimental results successfully validate the numerical parametric optimization process.

키워드

참고문헌

  1. Abbate, A., DeCusatis, C.M. and Das, P.K. (2002), Wavelets and Subbands: Fundamentals and Applications, Birkhauser, Boston, Massachusetts, USA.
  2. Abraham, O.N.L. and Brandon, J.A. (1995), "The modeling of the opening and closure of a crack", J. Vib. Acoust., 117(3A), 370-377. https://doi.org/10.1115/1.2874463
  3. Cheng, S.M., Swamidas, A., Wu, X.J. and Wallace, W. (1999), "Vibrational response of a beam with a breathing crack", J. Sound Vib., 225(1), 201-208. https://doi.org/10.1006/jsvi.1999.2275
  4. Douka, E. and Hadjileontiadis, L.J. (2005), "Time-frequency analysis of the free vibration response of a beam with a breathing crack", NDT & E Int., 38(1), 3-10. https://doi.org/10.1016/j.ndteint.2004.05.004
  5. Hakim, S.J. and Abdul Razak, H. (2013), "Structural damage detection of steel bridge girder using artificial neural networks and finite element models", Steel Compos. Struct., 14(4), 367-377. https://doi.org/10.12989/scs.2013.14.4.367
  6. Kim, J.T., Park, J.H., Yoon, H.S. and Yi, J.H. (2007), "Vibration-based damage detection in beams using genetic algorithm", Smart Struct. Syst., 3(3), 263-280. https://doi.org/10.12989/sss.2007.3.3.263
  7. Kim, J.T. and Stubbs, N. (2003), "crack detection in beam-type structures using frequency data", J. Sound Vib., 259(1), 145-160. https://doi.org/10.1006/jsvi.2002.5132
  8. Kolmogorov, A.N. (1958), "New metric invariant of transitive dynamical systems and endomorphisms of lebesgue spaces", Doklady of Russian Academy of Sciences, 119(5), 861-864.
  9. Krawczuk, M. and Ostachowicz, W.M. (1995), "Modelling and vibration analysis of a cantilever composite beam with a transverse open crack", J. Sound Vib., 183(1), 69-89. https://doi.org/10.1006/jsvi.1995.0239
  10. Lee, Y. and Chung, M. (2000), "A study on crack detection using eigenfrequency test data", Comput. Struct., 77(3), 327-342. https://doi.org/10.1016/S0045-7949(99)00194-7
  11. Meruane, V. and Heylen, W. (2011), "An hybrid real genetic algorithm to detect structural damage using modal properties", Mech. Syst. Signal Pr., 25(5), 1559-1573. https://doi.org/10.1016/j.ymssp.2010.11.020
  12. Nagarajaiah, S. and Erazo, K. (2016), "Structural monitoring and identification of civil infrastructure in the United States", Struct. Monit. Maint., 3(1), 51-69. https://doi.org/10.12989/smm.2016.3.1.051
  13. Prime, M.B. and Shevitz, B.W. (1996), "Linear and nonlinear methods for detecting cracks in beams", Proceedings of 14th International modal analysis conference, Michigan, February.
  14. Providakis, C., Tsistrakis, S., Voutetaki, M., Tsompanakis, Y., Stavroulaki, M., Agadakos, J., Kampianakis, E. and Pentes, G. (2015), "A new damage identification approach based on impedance-type measurements and 2D error statistics", Struct. Monit. Maint., 2(4), 319-338. https://doi.org/10.12989/SMM.2015.2.4.319
  15. Ren, W. and Sun, Z. (2008), "Structural damage identification by using wavelet entropy", Eng. Struct., 30(10), 2840-2849. https://doi.org/10.1016/j.engstruct.2008.03.013
  16. Richman, J.S. and Moorman, J.R. (2000), "Physiological time-series analysis using approximate entropy and sample entropy", Am. J. Physiol.. Heart and circulatory physiology, 278(6), 2039-2049. https://doi.org/10.1152/ajpheart.2000.278.6.H2039
  17. Sinai, Y.G. (1959), "On the notion of entropy of a dynamical system", Doklady of Russian Academy of Sciences, 124, 768-771.
  18. Wang, Q. and Deng, X. (1999), "Damage detection with spatial wavelets", Int. J. Solid. Struct., 36(23), 3443-3468. https://doi.org/10.1016/S0020-7683(98)00152-8
  19. Wang, W.J., Lu, Z.R. and Liu, J.K. (2012), "Time-frequency analysis of a coupled bridge-vehicle system with breathing cracks", Interact. Multiscale Mech., 5(3), 169-185. https://doi.org/10.12989/imm.2012.5.3.169
  20. Wimarshana, B., Wu, N. and Wu, C. (2016), "Application of entropy in identification of breathing cracks in a beam structure - simulation and experimental studies", Struct. Hlth. Monit., (under review).
  21. Wu, N. (2015), "Study of forced vibration response of a beam with a breathing crack using iteration method", J. Mech. Sci. Technol., 29(7), 2827-2835. https://doi.org/10.1007/s12206-015-0611-2
  22. Yan, Y.J., Cheng, L., Wu, Z.Y. and Yam, L.H. (2007), "Development in vibration-based structural damage detection technique", Mech. Syst. Sign. Proc., 21(5), 2198-2211. https://doi.org/10.1016/j.ymssp.2006.10.002
  23. Yang, Z., Chen, X., Jiang, Y. and He, Z. (2013), "Generalised local entropy analysis for crack detection in beam-like structures", Nondestructive Test. Evaluat., 29(2), 133-153.
  24. Yi, T.-H., Li, H.-N. and Gu, M. (2013), "Wavelet based multi-step filtering method for bridge health monitoring using GPS and accelerometer", Smart Struct. Syst., 11(4), 331-348. https://doi.org/10.12989/sss.2013.11.4.331
  25. Zhao, S., Wu, N. and Wang, Q. (2016), "Crack identification through scan-tuning of vibration characteristics using piezoelectric materials", Smart Mater. Struct., 26(2), 025005. https://doi.org/10.1088/0964-1726/26/2/025005
  26. Zhao, S., Wu, N. and Wang, Q. (2016), "Damage detection of beams by a vibration characteristics tuning technique through an optimal design of piezoelectric", Int. J. Struct. Stab. Dyn., 16(10), 1550070. https://doi.org/10.1142/S0219455415500704

피인용 문헌

  1. Monitoring of early looseness of multi-bolt connection: a new entropy-based active sensing method without saturation vol.28, pp.10, 2017, https://doi.org/10.1088/1361-665x/ab3a08