DOI QR코드

DOI QR Code

Effect of silica fume on mechanical properties of concrete containing recycled asphalt pavement

  • Katkhuda, Hasan N. (Civil Engineering Department, The Hashemite University) ;
  • Shatarat, Nasim K. (Civil Engineering Department, The University of Jordan) ;
  • Hyari, Khaled H. (Civil Engineering Department, The Hashemite University)
  • 투고 : 2016.09.15
  • 심사 : 2017.02.17
  • 발행 : 2017.05.10

초록

This paper presents the results of a study that investigated the improvement of the mechanical properties of coarse and fine recycled asphalt pavement (RAP) produced by adding silica fume (SF) with contents of 5%, 10%, and 15% by total weight of the cement. The coarse and fine natural aggregate (NA) were replaced by RAP with replacement ratio of 20%, 40% and 60% by the total weight of NA. In addition, SF was added to NA concrete mixes as a control for comparison. Twenty eight mixes were produced and tested for compressive, splitting tensile and flexural strength at the age of 28 days. The results show that the mechanical properties decrease with as the content of RAP increases. And the decrease in the compressive strength was more in the fine RAP mixes compared to the coarse RAP mixes, while the decrease in the splitting tensile and flexural strength was almost the same in both mixes. Furthermore, using SF enhances the mechanical properties of RAP mixes where the optimum content of SF was found to be 10%, and the mechanical properties enhancement of coarse RAP were better than fine RAP mixes. Accordingly, the RAP has the potential to be used in the concrete pavements or in other low strength construction applications in order to reduce the negative impact of RAP on the environment and human health.

키워드

참고문헌

  1. ASTM C150-16: Standard Specification for Portland Cement.
  2. ASTM C1240-15: Standard Specification for Silica Fume Used in Cementitious Mixtures.
  3. ASTM C127-15: Standard test method for relative density (specific gravity) and absorption of coarse aggregate.
  4. ASTM C131-14: Standard test method for resistance to degradation of small-Size coarse aggregate by abrasion and impact in the Los Angeles machine.
  5. ASTM C143: Standard Test Method for Slump of Hydraulic-Cement Concrete.
  6. Al-Oraimi, S., Hassan, H.F. and Hago, A. (2009), "Recycling of reclaimed asphalt pavement in portland cement concrete", J. Eng. Res., 6(1), 37-45. https://doi.org/10.24200/tjer.vol6iss1pp37-45
  7. Abendeh, R., Ahmad, H. and Hunaiti, Y. (2016), "Experimental studies on the behavior of concrete-filled steel tubes incorporating crumb rubber", J. Constr. Steel Res., 122, 251-260. https://doi.org/10.1016/j.jcsr.2016.03.022
  8. Bilondi, M.P., Marandi, S.M. and Ghasemi, F. (2016), "Effect of recycled glass powder on asphalt concrete modification", Struct. Eng. Mech., 59(2), 373-385. https://doi.org/10.12989/sem.2016.59.2.373
  9. Bermel, B.N. (2011), "Feasibility of recycled asphalt pavement as aggregate in Portland cement concrete pavement", Master Thesis, Montana State University, Montana.
  10. Berry, M., Dalton, K. and Murray, F. (2015), "Feasibility of reclaimed asphalt pavement as aggregate in Portland cement concrete pavements, Phase II: Field demonstration", Technical Report, FHWA/MT-15-003/8207-002
  11. Brand, A.S. and Roesler, J.R. (2015), "Ternary concrete with fractionated reclaimed asphalt pavement", Mater. J., 112, 155-164.
  12. Bilodeau, K., Sauzeat, C., Di Benedetto, H., Olard, F. and Bonneau, D. (2011), "Laboratory and in situ investigations of steel fiber reinforced compacted concrete containing reclaimed asphalt pavement", Proceedings of the 90th Annual Meeting of the Transportation Research Board, Washington DC.
  13. Bravo, M., De Brito, J., Pontes, J. and Evangelista, L. (2015), "Durability performance of concrete with recycled aggregates from construction and demolition waste plants", Constr. Build. Mater., 77, 357-369. https://doi.org/10.1016/j.conbuildmat.2014.12.103
  14. Delwar, M., Fahmy, M. and Taha, R. (1997), "Use of reclaimed asphalt pavement as an aggregate in portland cement concrete", ACI Mater. J., 251-256.
  15. Erdem, S. and Blankson, M.A. (2014), "Environmental performance and mechanical analysis of concrete containing recycled asphalt pavement (RAP) and waste precast concrete as aggregate", J. Hazard. Mater., 264, 403-410. https://doi.org/10.1016/j.jhazmat.2013.11.040
  16. Hassan, K.E., Brooks, J.J. and Erdman, M. (2000), "The use of reclaimed asphalt pavement (RAP) aggregates in concrete", Waste Mater. Constr. Waste Manage. Ser., 1, 121-128.
  17. Han, J., Acharya, B., Thakur, J.K. and Parsons, R. (2012), "Onsite use of recycled asphalt pavement materials and geocells to reconstruct pavements damaged by heavy trucks", Technical Report, MATC-KU, 462.
  18. Hossiney, N.J. (2008), "Evaluation of concrete containing RAP for use in concrete pavement", Technical Report, Gainesville: University of Florida.
  19. Huang, B., Shu, X. and Li, G. (2005), "Laboratory investigation of Portland cement concrete containing recycled asphalt pavements", Cement Concrete Res., 235, 2008-2013.
  20. Huang, B., Shu, X. and Burdette, E.G. (2006), "Mechanical properties of concrete containing recycled asphalt pavements", Mag. Concrete Res., 58(5), 313-320. https://doi.org/10.1680/macr.2006.58.5.313
  21. Jeevan, H., Manjunatha, M., Vadiraj Rao, N.R. and Shrikanth, H.D. (2016), "Mechanical and post thermal properties of concrete with recycled asphalt pavement aggregate", Int. J. Innov. Res. Sci. Eng. Technol., 5(7), 14028-14035.
  22. Katkhuda, H. and Shatarat, N. (2016), "Shear behavior of reinforced concrete beams using treated recycled concrete aggregate", Constr. Build. Mater., 125, 63-71. https://doi.org/10.1016/j.conbuildmat.2016.08.034
  23. Mathias, V., Sedran, T. and De Larrard, F. (2009), "Modeling of mechanical properties of cement concrete incorporating reclaimed asphalt pavement", Road Mater. Pave. Des., 10(1), 63-82. https://doi.org/10.1080/14680629.2009.9690182
  24. Modarres, A. and Hosseini, Z. (2014), "Mechanical properties of roller compacted concrete containing rice husk ash with original and recycled asphalt pavement material", Mater. Des., 64, 227-236. https://doi.org/10.1016/j.matdes.2014.07.072
  25. Mastali, M. and Dalvand, A. (2016), "Use of silica fume and recycled steel fibers in self-compacting concrete (SCC)", Constr. Build. Mater., 125, 196-209. https://doi.org/10.1016/j.conbuildmat.2016.08.046
  26. Mansour, F. and Farshad, S. K. (2016), "The effect of waste rubber particles and silica fume on the mechanical properties of Roller Compacted Concrete Pavement", J. Clean. Product., 129, 521-530. https://doi.org/10.1016/j.jclepro.2016.04.017
  27. Nili, M. and Ehsani, A. (2015), "Investigating the effect of the cement paste and transition zone on strength development of concrete containing nanosilica and silica fume", Mater. Des., 75, 174-183. https://doi.org/10.1016/j.matdes.2015.03.024
  28. Okafor, F. (2010), "Performance of recycled asphalt pavement as coarse aggregate in concrete", Leonardo Elec. J. Pract. Technol., 17, 47-58.
  29. Pedro, D., De Brito, J. and Evangelista, L.(2014), "Influence of the use of recycled concrete aggregates from different sources on structural concrete", Constr. Build. Mater., 71, 141-151. https://doi.org/10.1016/j.conbuildmat.2014.08.030
  30. Pedro, D., De Brito, J. and Evangelista, L. (2015), "Performance of concrete made with aggregates recycled from precasting industry waste - Influence of the crushing process", Mater. Struct., 48(12), 3965-3978. https://doi.org/10.1617/s11527-014-0456-7
  31. Prusty, R., Mukharjee, B.B. and Barai, S.V. (2015), "Nanoengineered concrete using recycled aggregates and nano-silica: Taguchi approach", Adv. Concrete Construct., 3(4), 253-268. https://doi.org/10.12989/acc.2015.3.4.253
  32. Settari, C., Debieb, F., Kadri, E.H. and Boukendakdji, O. (2015), "Assessing the effects of recycled asphalt pavement materials on the performance of roller compacted concrete", Constr. Build. Mater., 101, 617-621 https://doi.org/10.1016/j.conbuildmat.2015.10.039
  33. Seo, D.S. and Choi, H.B. (2014), "Effects of the old cement mortar attached to the recycled aggregate surface on the bond characteristics between aggregate and cement mortar", Constr. Build. Mater., 59, 72-77. https://doi.org/10.1016/j.conbuildmat.2014.02.047
  34. Saride, S., Avirneni, D. and Challapalli, S. (2016), "Micro-mechanical interaction of activated fly ash mortar and reclaimed asphalt pavement materials", Constr. Build. Mater., 123, 424-435. https://doi.org/10.1016/j.conbuildmat.2016.07.016
  35. Solanki, P. and Dash, B. (2015), "Mechanical properties of concrete containing recycled asphalt pavement and class C fly ash", Proceedings of the World of coal ash (WOCA) conference, Nasvhille, TN.
  36. Saravanakumar, P. and Dhinakaran, G. (2013), "Durability characteristics of recycled aggregate concrete", Struct. Eng. Mech., 47(5), 701-711. https://doi.org/10.12989/sem.2013.47.5.701
  37. Shah, A., Jan, I.U., Khan, R.U. and Qazi, E.U. (2013), "Experimental investigation on the use of recycled aggregates in producing concrete", Struct. Eng. Mech., 47(4), 545-557. https://doi.org/10.12989/sem.2013.47.4.545
  38. Shaikh, F., Kerai, S. and Kerai, S. (2015), "Effect of micro-silica on mechanical and durability properties of high volume fly ash recycled aggregate concretes (HVFA-RAC)", Adv. Concrete Construct., 3(4), 317-331. https://doi.org/10.12989/acc.2015.3.4.317
  39. Tia, M., Hossiney, N., Su, Y.M., Chen, Y. and Do, T.H. (2012), "Use of reclaimed asphalt pavement in concrete pavement slabs", Technical Report No. 00088115.
  40. Tompkins, D., Khazanovich, L., Darter, M.I. and Walter, F. (2009), "Design and construction of sustainable pavements", Technical report, Transportation Research Board, Record No. 2098:75-85.
  41. Topcu, I.B. and Isikdag, B. (2009), "Effects of crushed RAP on free and restrained shrinkage of mortars", Int. J. Concrete Struct. Mater., 3(2), 91-95. https://doi.org/10.4334/IJCSM.2009.3.2.091
  42. Wang, Y. (2016), "The effects of using reclaimed asphalt pavements (RAP) on the long-term performance of asphalt concrete overlays", Constr. Build. Mater., 120, 335-348. https://doi.org/10.1016/j.conbuildmat.2016.05.115
  43. Wongkeo, W., Thongsanitgarn, P., Ngamjarurojana, A. and Chaipanich, A. (2014), "Compressive strength and chloride resistance of self-compacting concrete containing high level fly ash and silica fume", Mater. Des., 64, 261-269. https://doi.org/10.1016/j.matdes.2014.07.042
  44. Yildirim, S., Meyer, C. and Herfellner, S. (2015), "Effects of internal curing on the strength, drying shrinkage and freeze-thaw resistance of concrete containing recycled concrete aggregates", Constr. Build. Mater., 91, 288-296. https://doi.org/10.1016/j.conbuildmat.2015.05.045
  45. Youssf, O., Mills, J. and Hassanli, R. (2016), "Assessment of the mechanical performance of crumb rubber concrete", Constr. Build. Mater., 125, 175-183. https://doi.org/10.1016/j.conbuildmat.2016.08.040
  46. Yang, R., Kang, S., Ozer, H. and Al-Qadi, I. (2015), "Environmental and economic analyses of recycled asphalt concrete mixtures based on material production and potential performance", Resour. Conserv. Recyc., 104, 141-151. https://doi.org/10.1016/j.resconrec.2015.08.014
  47. Youm, K.S., Moon, J., Cho, J.Y. and Kim, J.J. (2016), "Experimental study on strength and durability of lightweight aggregate concrete containing silica fume", Constr. Build. Mater., 114, 517-527. https://doi.org/10.1016/j.conbuildmat.2016.03.165
  48. Zhang, Z., Zhang, B. and Yan, P. (2016), "Hydration and microstructures of concrete containing raw or densified silica fume at different curing temperatures", Constr. Build. Mater., 121, 483-490. https://doi.org/10.1016/j.conbuildmat.2016.06.014

피인용 문헌

  1. Effect of using recycled coarse aggregate and recycled asphalt pavement on the properties of pervious concrete vol.67, pp.3, 2017, https://doi.org/10.12989/sem.2018.67.3.283