Steel and Composite Structures

  • 제23권5호
  • /
  • Pages.611-621
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Fire resistance of high strength fiber reinforced concrete filled box columns

  • Tang, Chao-Wei (Department of Civil Engineering & Geomatics, Cheng Shiu University)
  • 투고 : 2016.10.05
  • 심사 : 2017.02.13
  • 발행 : 2017.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an investigation on the fire resistance of high strength fiber reinforced concrete filled box columns (CFBCs) under combined temperature and loading. Two groups of full-size specimens were fabricated. The control group was a steel box filled with high-strength concrete (HSC), while the experimental group consisted of a steel box filled with high strength fiber concrete (HFC) and two steel boxes filled with fiber reinforced concrete. Prior to fire test, a constant compressive load (i.e., load level for fire design) was applied to the column specimens. Thermal load was then applied on the column specimens in form of ISO 834 standard fire curve in a large-scale laboratory furnace until the set experiment termination condition was reached. The test results show that filling fiber concrete can improve the fire resistance of CFBC. Moreover, the configuration of longitudinal reinforcements and transverse stirrups can significantly improve the fire resistance of CFBCs.

키워드

과제정보

연구 과제 주관 기관 : Architecture and Building Research Institute (ABRI)

참고문헌

  1. ACI Committee 544 (1982), "State of the art report of fiber reinforced concrete", Concr. Int.: Des. Construct., 4(5), 9-30.
  2. ACI-318 (2014), Building code requirements for reinforced concrete and commentary; American Concrete Institute, Farmington Hills, MI, USA.
  3. Aslani, F., Uy, B., Tao, Z. and Mashiri, F. (2015), "Predicting the axial load capacity of high-strength concrete filled steel tubular columns", Steel Compos. Struct., Int. J., 19(4), 967-993. https://doi.org/10.12989/scs.2015.19.4.967
  4. Atkinson, T. (2004), "Polypropylene fibers control explosive spalling in high performance concrete", Concrete, 38(10), 69-70.
  5. Bilodeau, A., Kodur, V.K.R. and Hoff, G.C. (2004), "Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire", Cement Concrete Compos., 26(2), 163-174. https://doi.org/10.1016/S0958-9465(03)00085-4
  6. Castillo, C. and Durrani, A.J. (1990), "Effect of transient high temperature on high-strength concrete", ACI Mater. J., 87(1), 47-53.
  7. Chakrabari, S.C., Sharma, K.N. and Mittal, A. (1994), "Residual strength in concrete after exposure to elevated temperature", Indian Concrete J., December, 713-717.
  8. Ding, J. and Wang, Y.C. (2008), "Realistic modelling of thermal and structural behaviour of unprotected concrete filled tubular columns in fire", J. Constr. Steel Res., 64(10), 1086-1102. https://doi.org/10.1016/j.jcsr.2007.09.014
  9. Ding, Y., Azevedo, C., Aguiar, J.B. and Jalali, S. (2012), "Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature", Constr. Build. Mater., 26(1), 21-31. https://doi.org/10.1016/j.conbuildmat.2011.04.058
  10. Ekmekyapar, T. (2016), "Experimental performance of concrete filled welded steel tube columns", J. Constr. Steel Res., 117, 175-184. https://doi.org/10.1016/j.jcsr.2015.10.013
  11. Espinos, A., Hospitaler, A. and Romero, M.L. (2009), "Fire resistance of axially loaded slender concrete filled steel tubular columns", Acta Polytechnica, 49(1), 39-43.
  12. Eurocode 2 (2004), Design of concrete structures. Part 1-2: general rules-structural fire design; European Committee for Standardization, Brussels, Belgium.
  13. Eurocode 4 (2005), Design of composite steel and concrete structures-Part 1-2: General-Structural fire design.
  14. Hachemi, S., Ounis, A. and Chabi, S. (2014), "Evaluating residual mechanical and physical properties of concrete at elevated temperatures", Int. J. Civil, Environ., Struct., Constr. Architect. Eng., 8(2), 176-181.
  15. Han, LH., Yao, G.H. and Zhao, X.L. (2005), "Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)", J. Constr. Steel Res., 61(9), 1241-1269. https://doi.org/10.1016/j.jcsr.2005.01.004
  16. Hannant, D.J. (1998), "Durability of polypropylene fibers in Portland cement-based composites: Eighteen years of data", Cement Concrete Res., 28(12), 1809-1817. https://doi.org/10.1016/S0008-8846(98)00155-0
  17. Hong, S. and Varma, A.H. (2009), "Analytical modeling of the standard fire behavior of loaded CFT columns", J. Constr. Steel Res., 65, 54-69. https://doi.org/10.1016/j.jcsr.2008.04.008
  18. Janotka, I. and Bagel, L. (2003), "Pore structures, permeabilities and compressive strengths of concrete at temperatures up to $800^{\circ}C$", ACI Mater J, 100(1), 87-89.
  19. Khan, Q.S., Sheikh, M.N. and Hadi, M.N.S. (2016), "Axial compressive behaviour of circular CFFT: Experimental database and design-oriented model", Steel Compos. Struct., Int. J., 21(4), 921-947. https://doi.org/10.12989/scs.2016.21.4.921
  20. Kim, D.K., Choi, S.M., Kim, J.H., Chung, K.S. and Park, S.H. (2005), "Experimental study on fire resistance of concrete-filled steel tube column under constant axial loads", Steel Struct., 5(4), 305-313. https://doi.org/10.12989/scs.2005.5.4.305
  21. Kim, N.W., Lee, H.H. and Kim, C.H. (2016), "Fracture behavior of hybrid fiber reinforced concrete according to the evaluation of crack resistance and thermal", Computers Concrete, 18(5), 685-696.
  22. Kodur, V.K.R. (1999), "Performance-based fire resistance design of concrete-filled steel columns", J. Constr. Steel Res., 51(1), 21-36. https://doi.org/10.1016/S0143-974X(99)00003-6
  23. Kodur, V.K.R. (2007), "Guidelines for fire resistant design of concrete-filled steel HSS columns-state-of-the-art and research needs", Steel Struct., 7(3), 173-182.
  24. Kodur, V. (2014), "Properties of concrete at elevated temperatures", ISRN Civil Engineering Volume, Article ID 468510.
  25. Kodur, V.K.R. and Sultan, M.A. (2003), "Effect of temperature on thermal properties of high-strength concrete", J. Mater. Civil Eng., 5(2), 101-107.
  26. Kodur, V.K.R., Wang, T.C. and Cheng, F.P. (2004), "Predicting the fire resistance behavior of high strength concrete columns", Cement Concrete Compos., 26(2), 141-153. https://doi.org/10.1016/S0958-9465(03)00089-1
  27. Krenchel, H. (1974), Fiber Reinforced Concrete, ACI SP-44, pp. 45-77.
  28. Larbi, J.A. and Polder, R.B. (2007), "Effects of polypropylene fibres in concrete: Microstructure after fire testing and chloride migration", Heron, 52(4), 289-306.
  29. Lee, H.H. and Yi, S.T. (2016), "Structural performance evaluation of steel fiber reinforced concrete beams with recycled aggregates", Comput. Concrete, 18(5), 741-756.
  30. Li, X. and Bu, F. (2011), "Residual strength for concrete after exposure to high temperatures", Innov. Comput. Info., 232, 382-390.
  31. Lie, T.T. and Kodur, V.K.R. (1996), "Fire resistance of steel columns filled with bar-reinforced concrete", ASCE J. Struct. Eng., 122(1), 30-36. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(30)
  32. Liu, B., Tong, L. and Zhao, X.L. (2014), "Fatigue failure characteristics of steel reinforced concrete girders", Procedia Mater. Sci., 3, 1717-1722. https://doi.org/10.1016/j.mspro.2014.06.277
  33. Mago, N. and Hicks, S.J. (2016), "Fire behaviour of slender, highly utilized, eccentrically loaded concrete filled tubular columns", J. Constr. Steel Res., 119, 123-132. https://doi.org/10.1016/j.jcsr.2015.12.002
  34. Metha, P.K. and Monteiro, P.J.M. (2006), Concrete; Microstructure, Properties and Materials, (3rd Edition), McGraw-Hill, New York, NY, USA.
  35. Mundhada, A.R. and Pofale, A.D. (2015), "Effect of high temperature on compressive strength of concrete", IOSR J. Mech. Civil Eng., 12(1), 66-70.
  36. Naaman, A.E. (1985), "Fiber reinforcement for concrete", ACI Concrete Int., 7(3), 21-25.
  37. Ozawa, M. and Morimoto, M. (2014), "Effects of various fibres on high-temperature spalling in high-performance concrete", Constr. Build. Mater., 71, 83-92. https://doi.org/10.1016/j.conbuildmat.2014.07.068
  38. Ozawa, M., Bo, Z., Uchida, Y. and Morimoto, H. (2014), "Preventive Effects of Fibers on Spalling of UFC at High Temperatures", J. Struct. Fire Eng., 5(3), 229-238. https://doi.org/10.1260/2040-2317.5.3.229
  39. Phan, L.T. and Carino, N.J. (1998), "Review of mechanical properties of HSC at elevated temperature", J. Mater. Civil Eng., 10(1), 58-64. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:1(58)
  40. Phan, L.T. and Carino, N.J. (2002), "Effects of test conditions and mixture proportions on behavior of high-strength concrete exposed to high temperatures", ACI Mater. J., 99(1), 54-66.
  41. Poon, C.S., Shui, Z.H. and Lam, L. (2004), "Compressive behavior of fiber reinforced high performance concrete subjected to elevated temperature", Cement Concrete Res., 34(12), 2215-2222. https://doi.org/10.1016/j.cemconres.2004.02.011
  42. Purkiss, J.A. (2007), Fire safety engineering design of structures, Butterworth-Heinemann, Elsevier, Oxoford, UK.
  43. Qu, X., Chen, Z., Nethercot, D.A., Gardner, L. and Theofanous, M. (2015), "Push-out tests and bond strength of rectangular CFST columns", Steel Compos. Struct., Int. J., 19(1), 21-41. https://doi.org/10.12989/scs.2015.19.1.021
  44. Sanjayan, G. and Stocks, L.J. (1993), "Spalling of high-strength silica fume concrete in fire", ACI Mater. J., 90(2), 170-173.
  45. Sideris, K.K., Manita, P. and Chaniotakis, E. (2009), "Performance of thermally damaged fiber reinforced concretes", Constr. Build. Mater., 23(3), 1232-1239. https://doi.org/10.1016/j.conbuildmat.2008.08.009
  46. Siddique, R. and Kaur, D. (2012), "Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures", J. Adv. Res., 3(1), 45-51. https://doi.org/10.1016/j.jare.2011.03.004
  47. Somayaji, S. (2001), Civil engineering materials, Prentice Hall, Upper Siddle River, NJ, USA.
  48. Song, T.Y., Han, L.H. and Yu, H.X. (2010), "Concrete filled steel tube stub columns under combined temperature and loading", J. Constr. Steel Res., 66(3), 369-384. https://doi.org/10.1016/j.jcsr.2009.10.010
  49. Swamy, R.N. and Mangat, P.S. (1974), "Influence of fiber geometry on the properties of steel fiber reinforced concrete", Cem. Concr. Res., 4(3), 451-465. https://doi.org/10.1016/0008-8846(74)90110-0
  50. Taiwan Construction and Planning Agency (2004), Design Code and Commentary for Steel Reinforced Concrete Structures, Taipei. [In Chinese]
  51. Tao, Z., Ghannama, M., Song, T.Y. and Han, L.H. (2016), "Experimental and numerical investigation of concrete-filled stainless steel columns exposed to fire", J. Constr. Steel Res., 118, 120-134. https://doi.org/10.1016/j.jcsr.2015.11.003
  52. Tatnall, P.C. (2002), "Shortcrete in fires: Effects of fibers on explosive spalling", Shortcrete, 4(4), 10-12.
  53. Toumi, B., Resheidat, M., Guemmadi, Z. and Chabil, H. (2009), "Coupled effect of high temperature and heating time on the residual strength of normal and high-strength concretes", Jordan J. Civil Eng., 3(4), 322-330.
  54. Wan, C.Y. and Zha, X.X. (2016), "Nonlinear analysis and design of concrete-filled dual steel tubular columns under axial loading", Steel Compos. Struct., Int. J., 20(3), 571-597. https://doi.org/10.12989/scs.2016.20.3.571
  55. Xu, M., Hallinan, B. and Wille, K. (2016), "Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete", Cement Concrete Compos., 70, 98-109. https://doi.org/10.1016/j.cemconcomp.2016.03.014
  56. Yan, Z., Shen, Y., Zhu, H., Li, X. and Lu, Y. (2015), "Experimental investigation of reinforced concrete and hybrid fibre reinforced concrete shield tunnel segments subjected to elevated temperature", Fire Safety J., 71, 86-99. https://doi.org/10.1016/j.firesaf.2014.11.009

피인용 문헌

  1. Depth-dependent evaluation of residual material properties of fire-damaged concrete vol.20, pp.4, 2017, https://doi.org/10.12989/cac.2017.20.4.503
  2. Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading vol.27, pp.2, 2017, https://doi.org/10.12989/scs.2018.27.2.243
  3. Seismic behavior of SFRC shear wall with CFST columns vol.28, pp.5, 2017, https://doi.org/10.12989/scs.2018.28.5.527
  4. An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams vol.70, pp.6, 2019, https://doi.org/10.12989/sem.2019.70.6.751
  5. Post-fire test of precast steel reinforced concrete stub columns under eccentric compression vol.33, pp.1, 2017, https://doi.org/10.12989/scs.2019.33.1.111
  6. Predicting the axial compressive capacity of circular concrete filled steel tube columns using an artificial neural network vol.35, pp.3, 2017, https://doi.org/10.12989/scs.2020.35.3.415
  7. Fire resistance and residual strength of reactive powder concrete Using metakaolin vol.36, pp.6, 2020, https://doi.org/10.12989/scs.2020.36.6.657
  8. Fire Performance of Continuous Steel-Concrete Composite Bridge Girders vol.25, pp.3, 2017, https://doi.org/10.1007/s12205-021-0985-x