Steel and Composite Structures

  • 제23권5호
  • /
  • Pages.557-570
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Ambient vibration testing and seismic performance of precast I beam bridges on a high-speed railway line

  • Toydemir, Burak (Istanbul Gelisim University, Gelisim Vocational School) ;
  • Kocak, Ali (Yildiz Technical University, Department of Civil Engineering) ;
  • Sevim, Baris (Yildiz Technical University, Department of Civil Engineering) ;
  • Zengin, Basak (Yildiz Technical University, Department of Civil Engineering)
  • 투고 : 2016.04.25
  • 발행 : 2017.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the seismic performance levels of four bridges are determined using finite element modeling based on ambient vibration testing. The study includes finite element modeling, analytical modal analyses, ambient vibration testing and earthquake analyses of the bridges. For the purpose, four prestressed precast I beam bridges that were constructed for the Ankara-Sivas high speed railway line are selected for analytical and experimental studies. In the study, firstly a literature review related to the dynamic behavior of bridges especially precast beam bridges is given and then the formulation part related to ambient vibration testing and structural performance according to Turkish Seismic Code (2007) is presented. Next, 3D finite element models of the bridge are described and modeled using LARSA 4D software, and analytical dynamic characteristics are obtained. Then ambient vibration testing conducted on the bridges under natural excitations and experimental natural frequencies are estimated. Lastly, time history analyses of the bridges under the 1999 Kocaeli, 1992 Erzincan, and 1999 Duzce Earthquakes are performed and seismic performance levels according to TSC2007 are determined. The results show that the damage on the bridges is all under the minimum damage limit which is in the minimum damage region under all three earthquakes.

키워드

과제정보

연구 과제 주관 기관 : Yildiz Technical University

참고문헌

  1. Altunisik, A.C., Bayraktar, A., Sevim, B. and Ates, S. (2011a), "Ambient vibration based seismic evaluation of isolated Gulburnu highway bridge", Soil Dyn. Earthq. Eng., 31(11), 1496-1510. https://doi.org/10.1016/j.soildyn.2011.05.020
  2. Altunisik, A.C., Bayraktar, A., Sevim, B. and Ozdemir, H. (2011b), "Experimental and analytical system identification of eynel arch type steel highway bridge", J. Constr. Steel Res., 67(12), 1912-1921. https://doi.org/10.1016/j.jcsr.2011.06.008
  3. ARTEMIS (2014), Structural Vibration Solutions A/S; Version 3, Aalborg East Denmark.
  4. Asr, A.A., Javadi, A.A., Johari, A. and Chen, Y. (2014), "Lateral load bearing capacity modelling of piles in cohesive soils in undrained conditions: An intelligent evolutionary approach", Appl. Soft Comput., 24, 822-828. https://doi.org/10.1016/j.asoc.2014.07.027
  5. Bathe, K.J. (1996), Finite Element Procedures in Engineering Analysis, Prentice-Hall, NJ, USA.
  6. Bayraktar, A., Altunisik, A.C., Sevim, B., Turker, T., Domanic, A. and Tas, Y. (2009), "Vibration characteristics of Komurhan highway bridge constructed with balanced cantilever method", J. Perform. Constr. Facil., 23(2), 90-99. https://doi.org/10.1061/(ASCE)0887-3828(2009)23:2(90)
  7. Bendat, J. and Piersol, A. (1986), Random Data: Analysis and Measurement Procedures, (2nd Edition), John Wiley and Sons, USA.
  8. Bendat, J.S. and Piersol, A.G. (2004), Random Data: Analysis and Measurement Procedures, John Wiley and Sons, USA.
  9. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference, San Antonio, TX, USA, February.
  10. Brincker, R., Ventura, C.E. and Andersen, P. (2003), "Why outputonly modal testing is a desirable tool for a wide range of practical applications", Proceedings of the 21st International Modal Analysis Conference (IMAC), Kissimmee, FL, USA, February.
  11. Butterworth, S. (1930), "On the theory of filter amplifiers", Wireless Engineer, 7(6), 536-541.
  12. Caetano, E. (2000), "Dynamic of cable-stayed bridges: Experimental assessment of cable-structure Interaction", Ph.D. Dissertation; Engineering Faculty of University of Porto, Portugal.
  13. Camara, A. and Astiz, M.A. (2012), "Pushover analysis for the seismic response prediction of cable-stayed bridges under multidirectional excitation", Eng. Struct., 41, 444-455. https://doi.org/10.1016/j.engstruct.2012.03.059
  14. Casas, J.R. and Chambi, J.L. (2014), "Partial safety factors for CFRP-wrapped bridge piers: Model assessment and calibration", Compos. Struct., 118, 267-283. https://doi.org/10.1016/j.compstruct.2014.07.032
  15. Catalan, A., Climent, A.B. and Cahis, X. (2010), "Selection and scaling of earthquake records in assessment of structures in lowto-moderate seismicity zones", Soil Dyn. Earthq. Eng., 30(1-2), 40-49. https://doi.org/10.1016/j.soildyn.2009.09.003
  16. Chopra, A.K. (2006), Dynamics of Structures: Theory and Applications to Earthquake Engineering, (Third Edition), Prentice Hall, USA.
  17. Dawood, H.M. and ElGawady, M. (2013), "Performance-based seismic design of unbonded precast post-tensioned concrete filled GFRP tube piers", Compos. Part B: Eng., 44(1), 357-367. https://doi.org/10.1016/j.compositesb.2012.04.065
  18. URL (2015), http://www.deprem.gov.tr/en/home; AFAD, Republic Of Turkey Prime Ministry Disaster & Emergency Management Authority Earthquake Department, Ankara, Turkey.
  19. Dwairi, H.M., Wagner, M.C., Kowalsky, M.J. and Zia, P. (2010), "Behavior of instrumented prestressed high performance concrete bridge girders", Constr. Build. Mater., 24(11), 2294-2311. https://doi.org/10.1016/j.conbuildmat.2010.04.026
  20. El-Gawady, M.A. and Dawood, H.M. (2012), "Analysis of segmental piers consisted of concrete filled FRP tubes", Eng. Struct., 38, 142-152. https://doi.org/10.1016/j.engstruct.2012.01.001
  21. Gentile, C. and Bernardini, G. (2008), "Output-only modal identification of a reinforced concrete bridge from radar-based measurements", NDT&E International, 71(7), 544-553.
  22. Ghosh, G. and Singh, Y. (2011), "Thakkar SK. Seismic response of a continuous bridge with bearing protection devices", Eng. Struct., 33(4), 1149-1156. https://doi.org/10.1016/j.engstruct.2010.12.033
  23. Heo, G., Kim, C. and Lee, C. (2014), "Experimental test of asymmetrical cable-stayed bridges using MR-damper for vibration control", Soil Dyn. Earthq. Eng., 57, 78-85. https://doi.org/10.1016/j.soildyn.2013.10.007
  24. Herlufsen, H., Gade, S. and Moller, N. (2006), "Identification techniques for Operational Modal Analysis - An overview and practical experiences", IMAC-XXIV: Conference & Exposition on Structural Dynamics, St. Louis, MI, USA, January-February.
  25. Jacobsen, N.J., Andersen, P. and Brincker, R. (2006), "Using enhanced frequency domain decomposition as a robust technique to harmonic excitation in operational modal analysis", Proceedings of ISMA2006: International Conference on Noise &Vibration Engineering, Leuven, Belgium, September.
  26. Karmakar, D., Chaudhuri, S.R. and Shinozuka, M. (2012), "Seismic response evaluation of retrofitted Vincent Thomas Bridge under spatially variable ground motions", Soil Dyn. Earthq. Eng., 42, 119-127. https://doi.org/10.1016/j.soildyn.2012.06.008
  27. Kayhan, A.H., Korkmaz, K.A. and Irfanoglu, A. (2011), "Selecting and scaling real ground motion records using harmony search algorithm", Soil Dyn. Earthq. Eng., 31(7), 941-953. https://doi.org/10.1016/j.soildyn.2011.02.009
  28. Kim, D.H., Moon, D.Y., Kim, M.K., Zi, G. and Roh, H. (2015), "Experimental test and seismic performance of partial precast concrete segmental bridge column with cast-in-place base", Eng. Struct., 100, 178-188. https://doi.org/10.1016/j.engstruct.2015.05.034
  29. Kong, B., Cai, C.S. and Kong, X. (2015), "Field monitoring study of an integral abutment bridge supported by prestressed precast concrete piles on soft soils", Eng. Struct., 104, 18-31. https://doi.org/10.1016/j.engstruct.2015.09.004
  30. Kulprapha, N. and Warnitchai, P. (2012), "Structural health monitoring of continuous prestressed concrete bridges using ambient thermal responses", Eng. Struct., 40, 20-38. https://doi.org/10.1016/j.engstruct.2012.02.001
  31. LARSA 4D, V7.07.16 (2013), Academic Version, Larsa, Inc., New York, NY, USA.
  32. Lee, D.H., Park, J., Lee, K. and Kim, B.H. (2011), "Nonlinear seismic assessment for the post-repair response of RC bridge piers", Compos. Part B: Eng., 42(5), 1318-1329. https://doi.org/10.1016/j.compositesb.2010.12.023
  33. Mara, V., Haghani, R. and Harryson, P. (2014), "Bridge decks of fibre reinforced polymer (FRP): A sustainable solution", Constr. Build. Mater., 50, 190-199. https://doi.org/10.1016/j.conbuildmat.2013.09.036
  34. Marti, J.V., Vidosa, F.G., Yepes, V. and Alcala, J. (2013), "Design of prestressed concrete precast road bridges with hybrid simulated annealing", Eng. Struct., 48, 342-352. https://doi.org/10.1016/j.engstruct.2012.09.014
  35. Mayoral, J.M. and Romo, M.P. (2015), "Seismic response of bridges with massive foundations", Soil Dyn. Earthq. Eng., 71, 88-99. https://doi.org/10.1016/j.soildyn.2015.01.008
  36. Moravcik, M. (2013), "Modified system of prestressing for new precast girders developed for highway bridges", Procedia Eng., 65, 236-241. https://doi.org/10.1016/j.proeng.2013.09.036
  37. Park, J. and Towashiraporn, P. (2014), "Rapid seismic damage assessment of railway bridges using the response-surface statistical model", Struct. Safety, 47, 1-12. https://doi.org/10.1016/j.strusafe.2013.10.001
  38. Ramos, J.L.F.S. (2007), "Damage identification on masonry structures based on vibration signatures", Ph.D. Dissertation; University of Minho, Portugal.
  39. Roh, H. and Reinhorn, A.M. (2010), "Hysteretic behavior of precast segmental bridge piers with superelastic shape memory alloy bars", Eng. Struct., 32(10), 3394-3403. https://doi.org/10.1016/j.engstruct.2010.07.013
  40. Roh, H., Ou, Y.C., Kim, J. and Kim, W. (2014), "Effect of yielding level and post-yielding stiffness ratio of ED bars on seismic performance of PT rocking bridge piers", Eng. Struct., 81, 454-463. https://doi.org/10.1016/j.engstruct.2014.10.005
  41. Ryu, H.K. and Chang, S.P. (2005), "Ultimate strength of continuous composite box-girder bridges with precast decks", J. Constr. Steel Res., 61(3), 329-343. https://doi.org/10.1016/j.jcsr.2004.08.003
  42. Sarrazin, M., Moroni, O., Neira, C. and Venegas, B. (2013), "Performance of bridges with seismic isolation bearings during the Maule earthquake, Chile", Soil Dyn. Earthq. Eng., 47, 117-131. https://doi.org/10.1016/j.soildyn.2012.06.019
  43. Schallhorn, C. and Rahmatalla, S. (2015), "Crack detection and health monitoring of highway steel-girder bridges", Struct. Health Monitor., 14(3), 281-299. https://doi.org/10.1177/1475921714568404
  44. Sousa, H., Bento, J. and Figueiras, J. (2013), "Construction assessment and long-term prediction of prestressed concrete bridges based on monitoring data", Eng. Struct., 52, 26-37. https://doi.org/10.1016/j.engstruct.2013.02.003
  45. TSC (2007), Turkish Earthquake Resistant Design Code Specifications for buildings to be built in disaster areas; Ministry of Public Works & Settlement, Ankara, Turkey,
  46. Valipour, H., Rajabi, A., Foster, S.J. and Bradford, M.A. (2015), "Arching behavior of precast concrete slabs in a deconstructable composite bridge deck", Constr. Build. Mater., 87, 67-77. https://doi.org/10.1016/j.conbuildmat.2015.04.006
  47. Wilson, T., Chen, S. and Mahmoud, H. (2015), "Analytical case study on the seismic performance of a curved and skewed reinforced concrete bridge under vertical ground motion", Eng. Struct., 100, 128-136. https://doi.org/10.1016/j.engstruct.2015.06.017
  48. Xiao, Y., Guo , Y.R., Zhu, P.S., Kunnath, S. and Martin, G.R. (2012), "Networked pseudo dynamic testing of bridge pier and precast pile foundation", Eng. Struct., 38, 32-41. https://doi.org/10.1016/j.engstruct.2011.12.020
  49. Yan, B., Dai, G.L. and Hu, N. (2015), "Recent development of design and construction of short span high-speed railway bridges in China", Eng. Struct., 100, 707-717. https://doi.org/10.1016/j.engstruct.2015.06.050
  50. Zacharenaki, A., Fragiadakis, M., Assimaki, D. and Papadrakakis, M. (2014), "Bias assessment in incremental dynamic analysis due to record scaling", Soil Dyn. Earthq. Eng., 67, 158-168. https://doi.org/10.1016/j.soildyn.2014.09.007

피인용 문헌

  1. Ambient vibration testing of existing buildings: Experimental, numerical and code provisions vol.10, pp.4, 2018, https://doi.org/10.1177/1687814018772718
  2. In-situ test and dynamic response of a double-deck tied-arch bridge vol.27, pp.2, 2017, https://doi.org/10.12989/scs.2018.27.2.161
  3. Finite element model calibration of a steel railway bridge via ambient vibration test vol.27, pp.3, 2017, https://doi.org/10.12989/scs.2018.27.3.327
  4. Research on static and dynamic behaviors of PC track beam for straddle monorail transit system vol.31, pp.5, 2017, https://doi.org/10.12989/scs.2019.31.5.437
  5. An analytical solution to the mapping relationship between bridge structures vertical deformation and rail deformation of high-speed railway vol.33, pp.2, 2017, https://doi.org/10.12989/scs.2019.33.2.209
  6. Analysis of the Vibration Characteristics of Ballastless Track on Bridges Using an Energy Method vol.10, pp.7, 2017, https://doi.org/10.3390/app10072289
  7. Mapped relationships between pier settlement and rail deformation of bridges with CRTS III SBT vol.36, pp.4, 2020, https://doi.org/10.12989/scs.2020.36.4.481
  8. Dynamic responses of a high-speed train passing a deformed bridge using a vehicle-track-bridge coupled model vol.235, pp.4, 2017, https://doi.org/10.1177/0954409720944337