참고문헌
- Jiang, Y., Chang, J. and Lee, C.-H., 2001, "An Experimental Study of the Torque-tenstion Relationship for Bolted Joints," Int. J. of Materials and Product Technol., Vol. 16, No. 4, pp. 417-429. https://doi.org/10.1504/IJMPT.2001.001264
- Yan, Y., Wen, W.-D., Chang, F.-K. and Shyprykevich, P., 1999, "Experimental Study on Clamping Effects on the Tensile Strength of Composite Plates with a Bolt-Filled Hole," Composites Part A: Appl. Sci. and Manufac., Vol. 30, No. 10, pp. 1215-1229. https://doi.org/10.1016/S1359-835X(99)00002-0
- Khashaba, U. A. and Sallam, H. E. M., Al- Shorbagy, A. E. and Sief, M. A., 2006, "Effect of Washer Size and Tightening Torque on the Performance," Composite Structures, Vol. 73, No. 3, pp. 310-317. https://doi.org/10.1016/j.compstruct.2005.02.004
- Kim, S. S., Kim, S. Y. and Kim, K. S., 2000, "Evaluation of Clamping Forces According to Length-to-diameter Ratios and Preserved Thread Lengths of High Strength Bolts," J. of Korean Soc. of Steel Construction, Vol. 12, No. 3, pp. 259-268.
- Kim, Y. H. and Kim, K. S., 1999, "Evaluation of Tightening Forces According to Length-diameter Ratios for High Strength Bolts," J. of the Architectural Institute of Korea, Vol. 15, No. 1, pp. 37-44.
- Han, J. W., Kim, J. H. and Park, Y. S., 2011, "Evaluation of Structural Performance and Improvement of Screw Thread Shape on 1,300 MPa High Strength Bolts," J. of the Korean Soc. of Civil Eng., Vol. 31, No. 3A, pp. 189-198.
- Min, K. B., Kim, J.-B., Park, K. and Ra, S. W., 2014, "Evaluation of Clamping Characteristics for Subminiature Screws According to Thread Angle Variation," J. Korean Soc. Precis. Eng., Vol. 31, No. 9, pp. 839-846. https://doi.org/10.7736/KSPE.2014.31.9.839
- Lee, H.-K., Park, K., Ra, S.-W. and Kim, J.-B., 2014, "Prediction of Joining Torque for Bit Depth of Subminiature Bolt," Trans. Korean Soc. Mech. Eng. A, Vol. 38, No. 8, pp. 917-923. https://doi.org/10.3795/KSME-A.2014.38.8.917
- Bhattacharya, A., Sen, A. and Das, S., 2010, "An Investigation on the Anti-loosening Characteristics of Threaded Fasteners under Vibration Conditions," Mechanism and Machine Theory, Vol. 45, No. 8, pp. 1215-1225. https://doi.org/10.1016/j.mechmachtheory.2008.08.004
- Pai, N. and Hess, D., 2002, "Three-dimensional Finite Element Analysis of Threaded Fastener Loosening due to Dynamic Shear Load," Eng. Failure Analysis, Vol. 9, No. 4, pp. 383-402. https://doi.org/10.1016/S1350-6307(01)00024-3
- Hwang, H.-Y., 2013, "Bolted Joint Torque Setting using Numerical Simulation and Experiments," J. of Mech. Sci. and Technol., Vol. 27, No. 5, pp. 1361-1371. https://doi.org/10.1007/s12206-013-0317-2
- ABAQUS, ABAQUS Manual, Version 6.12, Dassault Systems, USA, 2012.
- Matweb, http://www.matweb.com.