DOI QR코드

DOI QR Code

Reliability analysis of double-layer domes with stochastic geometric imperfections

  • Received : 2016.12.01
  • Accepted : 2017.03.06
  • Published : 2017.04.25

Abstract

This study aimed to investigate the effect of initial member length an imperfection in the load carrying capacity of double-layer domes space structures. First, for the member length imperfection of each member, a random number is generated from a normal distribution. Thereupon, the amount of the imperfection randomly varies from one member to another. Afterwards, based on the Push Down analysis, the collapse behavior and the ultimate capacity of the considered structure is determined using nonlinear analysis performed by the OpenSees software and this procedure is repeated numerous times by Monte Carlo simulation method. Finally, the reliability of structures is determined. The results show that the collapse behavior of double-layer domes space structures is highly sensitive to the random distribution of initial imperfections.

Keywords

Acknowledgement

Supported by : Islamic Azad University

References

  1. Affan, A. (1987), "Collapse of double layer space grid structures", Ph.D. Dissertation, University of Cambridge, U.K.
  2. Affan, A. and Calladine, C.R. (1989), "Initial bar tensions in pin jointed assemblies", J. Space Struct., 4(1), 1-16. https://doi.org/10.1177/026635118900400101
  3. AISC/ANSI 360-10 (2010), Specification for Structural Steel Buildings, Chicago, U.S.A.
  4. Broggi, M. and Schueller, G.I. (2011), "Efficient modeling of imperfections for buckling analysis of composite cylindrical shells", Eng. Struct., 33(5), 1796-1806. https://doi.org/10.1016/j.engstruct.2011.02.019
  5. Cardoso, J.B., De Almeida, J.R., Dias, J.M. and Coelho, P.G. (2008), "Structural reliability analysis using Monte Carlo simulation and neural networks", Adv. Eng. Soft., 39(6), 505-513. https://doi.org/10.1016/j.advengsoft.2007.03.015
  6. Chen, J.J., Che, J.W., Sun, H.A., Ma, H.B. and Cui, M.T. (2002), "Probabilistic dynamic analysis of truss structures", Struct. Eng. Mech., 13(2), 231-239. https://doi.org/10.12989/sem.2002.13.2.231
  7. De Paor, C., Cronin, K., James, P. and Kelliher, D. (2012), "Statistical characterization and modeling of random geometric imperfections in cylindrical shells", Thin-Wall. Struct., 58, 9-17. https://doi.org/10.1016/j.tws.2012.04.004
  8. El-Sheikh, A.L. (1991), "The effect of composite action on the behavior of space structures", Ph.D. Dissertation, University of Cambridge, U.K.
  9. El-Sheikh, A.L. (1995), "Sensitivity of space trusses to member geometric imperfections", J. Space Struct., 10(2), 89-98. https://doi.org/10.1177/026635119501000202
  10. El-Sheikh, A.L. (1997), "Effect of member length imperfections on triple-layer space trusses", J. Eng. Struct., 19(7), 540-550. https://doi.org/10.1016/S0141-0296(96)00120-4
  11. El-Sheikh, A.L. (2002), "Effect of geometric imperfections on single-layer barrel vaults", J. Space Struct., 17(4), 271-283. https://doi.org/10.1260/026635102321049538
  12. Fang, Y., Chen, J. and Tee, K.F. (2013), "Analysis of structural dynamic reliability based on the probability density evolution method", Struct. Eng. Mech., 45(2), 201-209. https://doi.org/10.12989/sem.2013.45.2.201
  13. Gholizadeh, S., Gheyratmand, C. and Davoudi, H. (2016), "Optimal design of double layer barrel vaults considering nonlinear behavior", Struct. Eng. Mech., 58(6), 1109-1126. https://doi.org/10.12989/sem.2016.58.6.1109
  14. Hurtado, J.E. and Barbat, A.H. (1998), "Monte Carlo techniques in computational stochastic mechanics", Arch. Comput. Meth. Eng., 5(1), 3-29. https://doi.org/10.1007/BF02736747
  15. Kala, Z. (2013), "Elastic lateral-torsional buckling of simply supported hot-rolled steel I-beams with random imperfections", Proc. Eng. J., 57, 504-514. https://doi.org/10.1016/j.proeng.2013.04.065
  16. Koutsourelakis, P.S., Pradlwarter, H.J. and Schueller, G.I. (2004), "Reliability of structures in high dimensions, part I: Algorithms and applications", Prob. Eng. Mech., 19(4), 409-417. https://doi.org/10.1016/j.probengmech.2004.05.001
  17. Lopez, R.H., Torii, A.J., Miguel, L.F.F. and Cursi, J.S. (2014), "An approach for the global reliability based design optimization of truss structures", Proceedings of the 2nd International Symposium on Uncertainty Quantification and Stochastic Modeling, Rouen, France.
  18. Mazzoni, S., McKenna, F. and Fenves, G.L. (2005), "The opensees command language manual", Department of Civil and Environmental Engineering, University of California, Berkeley, U.S.A.
  19. McKenna, F., Fenves, G.L. and Scott, M.H. (2010), "Open system for earthquake engineering simulation", Pacific Earthquake Engineering Research Center, University of California, Berkeley, U.S.A.
  20. Melchers, R.E. (1999), Structural Reliability Analysis and Prediction, 2nd Edition, John Wiley & Sons.
  21. Moghadasa, R.K. and Fadaeeb, M.J. (2012), "Reliability assessment of structures by Monte Carlo simulation and neural networks", Asian J. Civil Eng., 13(1), 79-88.
  22. Mousavi, M.A., Abedi, K. and Chenaghlou, M. (2015), "Imperfection sensitivity analysis of double domes free form space structures", J. Struct. Stab. Dyn., 15(4), 1450067. https://doi.org/10.1142/S0219455414500679
  23. Nowak, A.S. and Collins, K.R. (2000), Reliability of Structures, McGraw Hill.
  24. Papadrakakis, M. and Lagaros, N.D. (2002), "Reliability-based structural optimization using neural network and Monte Carlo simulation", Comput. Meth. Appl. Mech. Eng., 191(32), 3491-3507. https://doi.org/10.1016/S0045-7825(02)00287-6
  25. Roudsari, M.T. and Gordini, M. (2015), "Random imperfection effect on reliability of space structures with different supports", Struct. Eng. Mech., 55(3), 461-472. https://doi.org/10.12989/sem.2015.55.3.461
  26. Schenk, C.A. and Schueller, G.I. (2005), "12 stability analysis of cylindrical shells with random imperfections", Uncert. Assess. Large Fin. Elem. Syst., 24, 81-109.
  27. Schenk, C.A. and Schueller, G.I. (2007), "Buckling analysis of cylindrical shells with cutouts including random boundary and geometric imperfections", Comput. Meth. Appl. Mech. Eng., 196(35), 3424-3434. https://doi.org/10.1016/j.cma.2007.03.014
  28. Schmidt, L.C. and Morgan, P.R. and Hanaor, A. (1982), "Ultimate load testing of space trusses", J. Struct. Div., 180(6), 1324-1335.
  29. Schmidt, L.C., Morgan, P.R. and Hanaor, A. (1980), "Ultimate load behavior of a full scale space truss", Proceedings of the Institution of Civil Engineering, 69(2), 97-109. https://doi.org/10.1680/iicep.1980.2489
  30. Schueller, G.I. (1987), "A prospective study of materials based on stochastic methods", Mater. Struct., 20(4), 243-248. https://doi.org/10.1007/BF02485918
  31. Sheidaii, M.R. and Gordini, M. (2015), "Effect of random distribution of member length imperfection on collapse behavior and reliability of flat double-layer grid space structures", Adv. Struct. Eng., 18(9), 1475-1485. https://doi.org/10.1260/1369-4332.18.9.1475
  32. The European Standard EN 10210-2 (2006), Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Steels, U.K.
  33. Thornton, C.H. and Lew, P. (1984), Investigation of the Causes of Hartford Coliseum Collapse, Elsevier Applied Science Publishers.
  34. Torii, A.J., Lopez, R.H. and Biondini, F. (2012), "An approach to reliability-based shape and topology optimization of truss structures", Eng. Optim., 44(1), 37-53. https://doi.org/10.1080/0305215X.2011.558578
  35. Vryzidis, I., Stefanou, G. and Papadopoulos, V. (2013), "Stochastic stability analysis of steel tubes with random initial imperfections", Fin. Elem. Anal. Des. J., 77, 31-39. https://doi.org/10.1016/j.finel.2013.09.002
  36. Wada, A. and Wang, Z. (1992), "Influence of uncertainties on mechanical behavior of a double-layer space truss", J. Space Struct., 7(3), 223-235. https://doi.org/10.1177/026635119200700306
  37. Zhao, J., Zhang, Y. and Lin, Y. (2014), "Study on mid-height horizontal bracing forces considering random initial geometric imperfections", J. Constr. Steel Res., 92, 55-66. https://doi.org/10.1016/j.jcsr.2013.09.005
  38. Zhao, W., Qiu, Z. and Yang, Y. (2013), "An efficient response surface method considering the nonlinear trend of the actual limit state", Struct. Eng. Mech., 47(1), 45-58. https://doi.org/10.12989/sem.2013.47.1.045
  39. Zhou, Z., Wu, J. and Meng, S. (2014), "Influence of member geometric imperfection on geometrically nonlinear buckling and seismic performance of suspen-dome structures", J. Struct. Stab. Dyn., 14(3), 1350070. https://doi.org/10.1142/S0219455413500703

Cited by

  1. Influence of Member Length Imperfection on the Capacity of Spatial Structures vol.12, pp.None, 2018, https://doi.org/10.2174/1874149501812010481