References
- S. H. Jeong, K. M. Park, 2014, Development of Light weight and High Durable Air Brake Chamber for Commercial Vehicle, J. Kor. Soc. Mech. Technol., Vol.16, No. 6, pp. 2143-2148. https://doi.org/10.17958/ksmt.16.6.201412.2143
- S. C. Subramanian, S. Darbha, K. R. Rajagopal, 2004, Modeling the Pneumatic Subsystem of an S-cam Air Brake System, J. Dyn. Sys., Meas., Control, Vol. 126, No. 1, pp. 36-46. https://doi.org/10.1115/1.1666893
- M. K. Choi, H. Huh, 2014, Effect of Punch Speed on Amount of Springback in U-bending Process of Auto-body Steel Sheets, Procedia Eng., Vol. 81, pp. 963-968. https://doi.org/10.1016/j.proeng.2014.10.125
- S. Nakamura, H. Sugiura, H. Onoe, K. Ikemoto, 1994, Hydromechanical Drawing of Automotive Parts, J. Mater. Process. Technol., Vol. 46, No. 3-4, pp. 491-503. https://doi.org/10.1016/0924-0136(94)90129-5
- Y. Abe, T. Ohmia, K. Moria, T. Masudab, 2014, Improvement of Formability in Deep Drawing of Ultra-high Strength Steel Sheets by Coating of Die, J. Mater. Process. Technol., Vol. 214, No. 9, pp. 1838-1843. https://doi.org/10.1016/j.jmatprotec.2014.03.023
- K. Mori, T. Maeno, Y. Fukui, 2011, Spline Forming of Ultra-high Strength Gear Drum using Resistance Heating of Side Wall of Cup, CIRP Ann-Manuf. Technol., Vol. 60, No. 1, pp. 299-302. https://doi.org/10.1016/j.cirp.2011.03.144
- M. Gotoh, M. Katoh, M. Yamashita, 1997, Studies of Stretch-Drawing Process of Sheet Metals, J. Mater. Process. Technol., Vol. 63, No. 1-3, pp. 123-128. https://doi.org/10.1016/S0924-0136(96)02611-8
- Y. S. Kim, K. C. Park, J. B. Nam, B. H. Lee, 2015, Die Materials and their Wear Evaluation for Press Forming of High Strength Steels, Trans. Mater. Process., Vol. 24, No. 2, pp. 138-146. https://doi.org/10.5228/KSTP.2015.24.2.138
- X. Liu, H. Wang, D. Li, Y. Wu, 2006, Study on Kinetics of Carbide Coating Growth by Thermal Diffusion Process, Surf. Coat. Technol., Vol. 201, No. 6, pp. 2414-2418. https://doi.org/10.1016/j.surfcoat.2006.04.028