Structural Engineering and Mechanics

  • 제62권1호
  • /
  • Pages.107-111
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Buckling load optimization of laminated composite stepped columns

  • Topal, Umut (Department of Civil Engineering, Karadeniz Technical University, Faculty of Technology)
  • 투고 : 2016.10.27
  • 심사 : 2017.02.10
  • 발행 : 2017.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

This paper deals with critical buckling load optimization of symmetric angle-ply laminated stepped flat columns under axial compression load. The design objective is the maximization of the critical buckling load and the design variable is the fiber orientations in the layers of the laminates. The classical laminate plate theory is used for the finite element solution of the laminated stepped flat columns. The modified feasible direction (MFD) method is used for the optimization routine. For this purpose, a program based on FORTRAN is exploited. Finally, the optimization results are presented for width ratios (b/B), ratios of fillet radius ($r_1/r_2$), aspect ratios (L/B) and boundary conditions. The results are presented in graphical and tabular forms and the results are compared.

키워드

참고문헌

  1. Adali, S., Lene, F., Duvaut, G. and Chiaruttini, V. (2003), "Optimization of laminated composites subject to uncertain buckling loads", Compos. Struct., 62, 261-269. https://doi.org/10.1016/j.compstruct.2003.09.024
  2. Adali, S., Richter, A., Verijenko, V.E. and Summers, E.B. (1995), "Optimal design of hybrid laminates with discrete ply angles for maximum buckling load and minimum cost", Compos. Struct., 32, 409-415. https://doi.org/10.1016/0263-8223(95)00067-4
  3. Akbulut, H., Gundogdu, O. and Sengul, M. (2010), "Buckling behaviors of laminated composite stepped flat columns", Finite Elem. Anal. Des., 46, 1061-1067. https://doi.org/10.1016/j.finel.2010.07.004
  4. Correia, V.M.F., Soares, C.M.M. and Soares, C.A.M. (2003), "Buckling optimization of composite laminated adaptive structures", Compos. Struct., 62, 315-321. https://doi.org/10.1016/j.compstruct.2003.09.030
  5. Fares, M.E., Youssif, Y.G. and Hafiz, M.A. (2004), "Structural and control optimization for maximum thermal buckling and minimum dynamic response of composite laminated plates", Int. J. Solid. Struct., 41, 1005-1019. https://doi.org/10.1016/j.ijsolstr.2003.09.047
  6. Fukunaga, H., Sekine, H., Sato, M. and Iino, A. (1995), "Buckling design of symmetrically laminated plates using lamination parameters", Comput. Struct., 57, 643-649. https://doi.org/10.1016/0045-7949(95)00050-Q
  7. Hu, H.T. and Lin, B.H. (1995), "Buckling optimization of symmetrically laminated plates with various geometries and end conditions", Compos. Sci. Tech., 55, 277-285. https://doi.org/10.1016/0266-3538(95)00105-0
  8. Joshi, M.G. and Biggers, S.B. (1996), "Thickness optimization for maximum buckling loads in composite laminated plates", Compos. Part B: Eng., 27, 105-114.
  9. Lellep, J. and Kraav, T. (2008), "Optimization of stepped columns under compression", Proceedings of the 20th EURO Mini Conference on Continuous Optimization and Knowledge-Based Technologies (EurOPT-2008), Neringa, Lithuania.
  10. Lellep, J. and Sakkov, E. (2008), "Buckling of stepped composite columns", Mech. Compos. Mater., 42, 63-72.
  11. Mateus, H.C., Soares, C.M.M. and Soares, C.A.M. (1997), "Buckling sensitivity analysis and optimal design of thin laminated structures", Compos. Struct., 64, 461-472. https://doi.org/10.1016/S0045-7949(96)00130-7
  12. Sciuva, D.M., Gherlone, M. and Lomario, D. (2003), "Multiconstrained optimization of laminated and sandwich plates using evolutionary algorithms and higher-order plate theories", Compos. Struct., 59, 149-154. https://doi.org/10.1016/S0263-8223(02)00132-0
  13. Sebaey, T.A., Lopes, C.S., Blanco, C. and Costa, C. (2013), "Ant colony optimization for dispersed laminated composite panels under biaxial loading", Compos. Struct., 94, 31-36.
  14. Setoodeh, S., Abdalla, M.M., Ijsselmuiden, S.T. and Gurdal, Z. (2009), "Design of variable-stiffness composite panels for maximum buckling load", Compos. Struct., 87, 109-117. https://doi.org/10.1016/j.compstruct.2008.01.008
  15. Walker, M. (2001), "Multiobjective design of laminated plates for maximum stability using the finite element method", Compos. Struct., 54, 389-393. https://doi.org/10.1016/S0263-8223(01)00114-3
  16. Walker, M. (2002), "The effect of stiffeners on the optimal ply orientation and buckling load of rectangular laminated plates", Compos. Struct., 80, 2229-2239. https://doi.org/10.1016/S0045-7949(02)00265-1
  17. Walker, M. and Hamilton, R. (2005), "A methodology for optimally designing fibre-reinforced laminated structures with design variable tolerances for maximum buckling strength", Thin Wall. Struct., 43, 161-174. https://doi.org/10.1016/j.tws.2004.07.001
  18. Walker, M., Adali, S. and Verijenko, V.E. (1996), "Optimal design of symmetric angle-ply laminates subject to nonuniform buckling loads and inplane restraints", Thin Wall. Struct., 26, 45-60. https://doi.org/10.1016/0263-8231(96)00002-X

피인용 문헌

  1. Post-buckling responses of a laminated composite beam vol.26, pp.6, 2017, https://doi.org/10.12989/scs.2018.26.6.733
  2. Geometrically nonlinear analysis of a laminated composite beam vol.66, pp.1, 2017, https://doi.org/10.12989/sem.2018.66.1.027
  3. Thermal post-buckling analysis of a laminated composite beam vol.67, pp.4, 2018, https://doi.org/10.12989/sem.2018.67.4.337
  4. Buckling load optimization of laminated plates resting on Pasternak foundation using TLBO vol.67, pp.6, 2018, https://doi.org/10.12989/sem.2018.67.6.617
  5. Non-Linear dynamic pulse buckling of laminated composite curved panels vol.73, pp.2, 2017, https://doi.org/10.12989/sem.2020.73.2.181
  6. Analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipes based on three-dimensional stress state vol.77, pp.1, 2021, https://doi.org/10.12989/sem.2021.77.1.137