Structural Engineering and Mechanics

  • 제62권1호
  • /
  • Pages.55-64
  • /
  • 2017
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Optimization and application of multiple tuned mass dampers in the vibration control of pedestrian bridges

  • Lu, Zheng (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Chen, Xiaoyi (Research Institute of Structural Engineering and Disaster Reduction, Tongji University) ;
  • Li, Xiaowei (Research Institute of Structural Engineering and Disaster Reduction, Tongji University) ;
  • Li, Peizhen (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2014.10.09
  • 심사 : 2017.01.05
  • 발행 : 2017.04.10
⟨ 이전 논문 다음 논문 ⟩

초록

An effective design approach for Multiple Tuned Mass Dampers (MTMDs) in pedestrian bridges was proposed by utilizing the transfer function to obtain each TMD's optimum stiffness and damping. A systematic simulation of pedestrian excitations was described. The motion equation of a typical MTMD system attached to a Multi-degree-of-freedom (MDOF) system was presented, and the transfer function from the input pedestrian excitations to the output acceleration responses was defined. By solving the minimum norm of the transfer function, the parameters of the MTMD which resulted in the minimum overall responses can be obtained. Two applications of lightly damped pedestrian bridges attached with MTMD showed that MTMDs designed through this method can significantly reduce the structural responses when subjected to pedestrian excitations, and the vibration control effects were better than the MTMD when it was considered as being composed of equal number and mass ratios of TMDs designed by classical Den Hartog method.

키워드

과제정보

연구 과제 주관 기관 : National Natural Science Foundation of China

참고문헌

  1. Abubakar, I.M. and Farid, B.J.M. (2009), "Generalized Den Hartog tuned mass damper system for control of vibrations in structures", Seismic Control ., 59, 185-193.
  2. Allen, D.E. and Murray, T.M. (1993), "Design criterion for vibrations due to walking", AISC Eng. J., 30(4), 117-129.
  3. Anh, N.D. and Nguyen, N.X. (2012), "Extension of equivelent linearization method to design of TMD for linear damped systems", Struct. Control. Hlth., 19(6), 565-573.
  4. British Standard 5400 (2006), Specification for Loads, Steel, concrete and composite bridges.
  5. Carpineto, N., Lacarbonara, W. and Vestroni, F. (2010), "Mitigation of pedestrian-induced vibrations in suspension footbridges via multiple tuned mass dampers", J. Vib. Control., 16(5), 749-776. https://doi.org/10.1177/1077546309350188
  6. Chakraborty, S. and Debbarma, R. (2016), "Robust optimum design of tuned liquid column damper in seismic vibration control of structures under certain bounded system parameters", Struct. Infrastr. Eng., 12(5), 592-602. https://doi.org/10.1080/15732479.2015.1031142
  7. Chen, X., Ding, Y.L., Li, A.Q., Zhang, Z.Q. and Sun, P. (2012). "Investigations on serviceability control of long-span structures under human-induced excitation", Earthq. Eng. Struct. D., 11(1), 57-71. https://doi.org/10.1002/eqe.4290110106
  8. Chinese Code CJJ69 (1995), Technical Specifications of Urban Pedestrian Overcrossing and Underpass, Beijing.
  9. Da Silva, J.G.S., Vellasco, P.C.G., De Andrade, S.A.L., Soeiro, F.J.D.C.P. and Werneck, R.N. (2003). "An evaluation of the dynamical performance of composite slabs", Comput. Struct., 81(1), 1905-1913. https://doi.org/10.1016/S0045-7949(03)00210-4
  10. Dai, K.S., Wang, J.Z., Mao, R.F., Lu, Z. and Chen, S.E. (2016), "Experimental investigation on dynamic characterization and seismic control performance of a TLPD system", Struct. Des. Tall Spec. Build., DOI: 10.1002/tal.1350.
  11. Fujino, Y., Pacheco, B.M., Nakamura, S. and Warnitchai, P. (1993), "Synchronization of human walking observed during lateral vibration of a congested pedestrian bridge", Earthq. Eng. Struct. D., 22(9), 741-785. https://doi.org/10.1002/eqe.4290220902
  12. Gong, S.M. and Zhou, Y. (2016), "Experimental study and numerical simulation on a new type of viscoelastic damper with strong nonlinear characteristics", Struct. Control. Hlth, DOI: 10.1002/stc.1897.
  13. Iba, D., Masuda, A. and Sone, A. (2006), "Robust design method of multi-degree-of-freedom passive tuned mass damper by control theory", ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference, Vancouver, BC, Canada, July.
  14. Li, C.X. (2002), "Optimum multiple tuned mass dampers for structures under the ground acceleration based on DDMF and ADMF", Earthq. Eng. Struct. D., 31, 897-919. https://doi.org/10.1002/eqe.128
  15. Li, Q., Fan, J.S., Nie, J.G., Li, Q.W. and Chen, Y. (2010), "Crowd-induced random vibration of footbridge and vibration control using multiple tuned mass dampers", J. Sound. Vib., 329(19), 4068-4092. https://doi.org/10.1016/j.jsv.2010.04.013
  16. Lu, X.L., Ding, K., Shi, W.X. and Weng, D.G. (2012), "Tuned mass dampers for human-induced vibration control of the Expo Culture Centre at the World Expo 2010 in Shanghai, China", Struct. Eng. Mech., 43(5), 607-621. https://doi.org/10.12989/sem.2012.43.5.607
  17. Lu, Z., Chen, X.Y., Lu, X.L. and Yang, Z. (2016b), "Shaking table test and numerical simulation of an RC frame-core tube structure for earthquake-induced collapse", Earthq. Eng. Struct. D., 45(9), 1537-1556. https://doi.org/10.1002/eqe.2723
  18. Lu, Z., Chen, X.Y., Zhang, D.C. and Dai, K.S. (2016a), "Experimental and analytical study on the performance of particle tuned mass dampers under seismic excitation", Earthq. Eng. Struct. D., DOI: 10.1002/eqe.2826.
  19. Lu, Z., Lu, X.L, Jiang H.J. and Masri, S.F. (2014), "Discrete element method simulation and experimental validation of particle damper system", Eng. Comput, 31(4):810-823. https://doi.org/10.1108/EC-08-2012-0191
  20. Lu, Z., Lu, X.L, Lu, W.S. and Masri, S.F. (2012), "Shaking table test of the effects of multi-unit particle dampers attached to an MDOF system under earthquake excitation", Earthq. Eng. Struct. D., 41(5), 987-1000. https://doi.org/10.1002/eqe.1170
  21. Lu, Z., Lu, X.L. and Masri, S.F. (2010), "Studies of the performance of particle dampers under dynamic loads", J. Sound Vib., 329(26):5415-5433. https://doi.org/10.1016/j.jsv.2010.06.027
  22. Lu, Z., Wang, D.C. and Zhou, Y. (2017a), "Experimental parametric study on wind-induced vibration control of particle tuned mass damper on a benchmark high-rise building", Struct. Des. Tall Spec., DOI: 10.1002/tal.1359
  23. Lu, Z., Wang, D.C., Masri, S.F. and Lu, X.L. (2016c), "An experimental study of vibration control of wind-excited highrise buildings using particle tuned mass dampers", Smart. Struct. Syst., 18(1), 93-115. https://doi.org/10.12989/sss.2016.18.1.093
  24. Lu, Z., Yang, Y.L., Lu, X.L. and Liu, C.Q. (2017b), "Preliminary study on the damping effect of a lateral damping buffer under a debris flow load", Appl. Sci., 7(2), 201. https://doi.org/10.3390/app7020201
  25. Marano, G.C., Sgobba, S., Greco, R. and Mezzina, M. (2008), "Robust optimum design of tuned mass dampers devices in random vibrations mitigation", J. Sound. Vib., 313(3), 472-492. https://doi.org/10.1016/j.jsv.2007.12.020
  26. Masaki, N. and Hirata, H. (2004),"Vibration control performance of damping coupled tuned mass dampers", ASME/JSME 2004 Pressure Vessels and Piping Conference, San Diego, California, July.
  27. Miguel, L.F.F, Lopez, R.H., Miguel, L.F.F. and Torri, A.J. (2016), "A novel apporach to the optimum design of MTMDs under seismic excitations", Earthq. Eng. Struct. D., DOI: 10.1002/stc.1845.
  28. Mrabet, E., Guedri, M., Ichchou, M. and Ghanmi, S. (2015), "New approaches in reliability based optimization of tuned mass damper in presence of uncertain bounded parameters", J. Sound Vib., 355, 93-116. https://doi.org/10.1016/j.jsv.2015.06.009
  29. Rana, R. and Soong, T.T. (1998), "Parametric study and simplified design of tuned mass dampers", Eng. Struct., 20(3), 193-204. https://doi.org/10.1016/S0141-0296(97)00078-3
  30. Salvi, J. and Rizzi, E. (2015), "Optimum tuning of tuned mass dampers for frame structures under earthquake excitation", Struct. Control. Hlth., 22(4), 707-725. https://doi.org/10.1002/stc.1710
  31. Singh, M.P., Singh, S. and Moreschi, L.M. (2002), "Tuned mass dampers for response control of torsional buildings", Earthq. Eng. Struct. D., 31, 749-769. https://doi.org/10.1002/eqe.119
  32. Tubino, F. and Piccardo, G. (2015), "Tuned mass damper optimization for the mitigation of human-induced vibrations of pedestrian bridges", Meccanica, 50(3), 809-824. https://doi.org/10.1007/s11012-014-0021-z
  33. Wong, K.K.F. and Johnson, J. (2009), "Seismic energy dissipation of inelastic structures with multiple tuned mass dampers", J. Eng. Mech., 135(4), 265-275. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:4(265)
  34. Xiang, P. and Nishitani, A. (2015), "Optimum design and application of non-traditional tuned mass damper toward seismic response control with experimental verification", Earthq. Eng. Struct. D., 44(13), 2199-2220. https://doi.org/10.1002/eqe.2579
  35. Xu, K. and Igusa, T. (1992). "Dynamic characteristics of multiple substructures with closely spaced frequencies", Earthq. Eng. Struct. D., 21(12), 1059-1070. https://doi.org/10.1002/eqe.4290211203
  36. Yang, F., Sedaghati, R. and Esmailzadeh, E. (2010), "Vibration suppression using distributed tuned mass damper", Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Montreal, Quebec, Canada, August.
  37. Yang, Y.Q. and Ke, Z.T. (2008), "Vibration control of footbridge", Constr. Des. Project, 2, 93-97.
  38. Zhou, Y., Zhang, C.Q. and Lu, X.L. (2016), "Seismic performance of a damping outrigger system for tall buildings", Struct. Control. Hlth., DOI: 10.1002/stc.1864.

피인용 문헌

  1. Discrete element method-based collapse simulation, validation and application to frame structures 2017, https://doi.org/10.1080/15732479.2017.1373133
  2. Study on Adaptive-Passive and Semi-Active Eddy Current Tuned Mass Damper with Variable Damping vol.10, pp.1, 2018, https://doi.org/10.3390/su10010099
  3. Shaking table test and numerical simulation of a superimposed reinforced concrete shear wall structure vol.27, pp.2, 2018, https://doi.org/10.1002/tal.1412
  4. Study on self-adjustable tuned mass damper with variable mass 2018, https://doi.org/10.1002/stc.2114
  5. Particle impact dampers: Past, present, and future vol.25, pp.1, 2018, https://doi.org/10.1002/stc.2058
  6. An equivalent method for optimization of particle tuned mass damper based on experimental parametric study 2018, https://doi.org/10.1016/j.jsv.2017.05.048
  7. Studies on Seismic Performance of Precast Concrete Columns with Grouted Splice Sleeve vol.7, pp.6, 2017, https://doi.org/10.3390/app7060571
  8. Experimental Study and Numerical Simulation of a Laminated Reinforced Concrete Shear Wall with a Vertical Seam vol.7, pp.6, 2017, https://doi.org/10.3390/app7060629
  9. Experimental and numerical study on vibration control effects of a compound mass damper vol.27, pp.15, 2018, https://doi.org/10.1002/tal.1511
  10. Comparative Studies on Structures with a Tuned Mass Damper and a Particle Damper vol.31, pp.6, 2018, https://doi.org/10.1061/(ASCE)AS.1943-5525.0000878
  11. Numerical Simulation and In-Situ Measurement of Ground-Borne Vibration Due to Subway System vol.10, pp.7, 2018, https://doi.org/10.3390/su10072439
  12. Time-Frequency Energy Distribution of Ground Motion and Its Effect on the Dynamic Response of Nonlinear Structures vol.11, pp.3, 2019, https://doi.org/10.3390/su11030702
  13. Friction tuned mass damper optimization for structure under harmonic force excitation vol.65, pp.6, 2017, https://doi.org/10.12989/sem.2018.65.6.761
  14. Performance-based optimal design of tuned impact damper for seismically excited nonlinear building vol.160, pp.None, 2018, https://doi.org/10.1016/j.engstruct.2018.01.042
  15. Mitigation of the seismic response of a cable-stayed bridge with soil-structure-interaction effect using tuned mass dampers vol.69, pp.6, 2019, https://doi.org/10.12989/sem.2019.69.6.699
  16. Optimization of the Auxiliary-Beam System in Railway Bridge Vibration Mitigation Using FEM Simulation and Genetic Algorithms vol.11, pp.9, 2017, https://doi.org/10.3390/sym11091089
  17. Design of a Tuned Mass Damper Inerter (TMDI) Based on an Exhaustive Search Optimization for Structural Control of Buildings under Seismic Excitations vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/8875268
  18. Finite element model updating - Case study of a rail damper vol.73, pp.1, 2017, https://doi.org/10.12989/sem.2020.73.1.027
  19. Research on Seismic Performance of an Innovative Upper-Lower Half-Story Precast Shear Wall vol.2021, pp.None, 2017, https://doi.org/10.1155/2021/5519575
  20. Shaking table test and numerical simulation of the vibration control performance of a tuned mass damper on a transmission tower vol.17, pp.8, 2021, https://doi.org/10.1080/15732479.2020.1800755
  21. Design and dynamic characteristics of a double-layer permanent-magnet buffer under intensive impact load vol.506, pp.None, 2017, https://doi.org/10.1016/j.jsv.2021.116158
  22. Designing and experimental study of compact vibration isolator with quasi-zero stiffness vol.79, pp.4, 2021, https://doi.org/10.12989/sem.2021.79.4.415