DOI QR코드

DOI QR Code

초콜릿 소재의 3차원 프린터 개발에 관한 연구

A Study on Development of Three-Dimensional Chocolate Printer

  • 김규언 (서울과학기술대학교 대학원 기계설계로봇공학과) ;
  • 박근 (서울과학기술대학교 기계시스템디자인공학과) ;
  • 이치범 (서울과학기술대학교 기계시스템디자인공학과)
  • Kim, Kyu Eon (Department of Mechanical Design and Robot Engineering, Graduate School, Seoul National University of Science and Technology) ;
  • Park, Keun (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology) ;
  • Lee, Chibum (Department of Mechanical System Design Engineering, Seoul National University of Science and Technology)
  • 투고 : 2016.10.10
  • 심사 : 2017.01.18
  • 발행 : 2017.04.01

초록

In this study, we developed a 3D chocolate printer and studied the conditions needed for chocolate printing. Because chocolate is a mixture of cocoa mass, cocoa butter and sugar particles, its properties vary with temperature, and care is required in melting and extrusion. A chocolate supply unit is composed of a heating block and a syringe pump. It is integrated with a 3-axis linear robot. In order to be more accurate than the existing 3D chocolate printer is, the system was configured so that the printing line width became $430{\mu}m$. Printing performance was studied according to various parameters. The condition needed for printing lines with a stable width was discovered by the experimental design method and has been confirmed by a 2D line test. These 3D printing experiments showed that it was possible to build a 3D shape with an inclination angle of up to $45^{\circ}$ without support. Further, chocolate printing of a 3D shape has been successfully verified with the developed system.

키워드

참고문헌

  1. Gibson, I., Rosen, D. W., and Stucker, B., "Additive Manufacturing Technologies," Springer, 2010.
  2. Yoo, C. J., Kim, H., Park, J. H., Yun, D. H., Shin, J. K., et al., “Study of Optimal Process Conditions of 3D Porous Polymer Printing for Personal Safety Products,” J. Korean Soc. Precis. Eng., Vol. 33, No. 5, pp. 333-339, 2016. https://doi.org/10.7736/KSPE.2016.33.5.333
  3. Yi, H. W., Lee, Y. M., Shin, B. S., Lee, T. G., and Kang, M. C., “Prototype Manufacturing Using 3D Printing and Characteristics of Flow Rate and Dynamics for High Temperature Solenoid Valve,” J. Korean Soc. Precis. Eng., Vol. 33, No. 5, pp. 341-348, 2016. https://doi.org/10.7736/KSPE.2016.33.5.341
  4. Lee, J. E., Lim, Y. E., and Park, K., “Finite Element Analysis of a Customized Eyeglasses Frame Fabricated by 3D printing,” Transactions of the Korean Society of Mechanical Engineers A, Vol. 40, No. 1, pp. 65-71, 2016. https://doi.org/10.3795/KSME-A.2016.40.1.065
  5. Frazier, W. E., “Metal Additive Manufacturing: A Review,” Journal of Materials Engineering and Performance, Vol. 23, No. 6, pp. 1917-1928, 2014. https://doi.org/10.1007/s11665-014-0958-z
  6. Leuven, K., “Additive Manufacturing of Ceramics: A Review,” Journal of Ceramic Science and Technology, Vol. 5, No. 4, pp. 245-260, 2014.
  7. Park, S. H., Park, J. H., Lee, H. J., and Lee, N. K., “Current Status of Biomedical Applications Using 3D Printing Technology,” J. Korean Soc. Precis. Eng., Vol. 31, No. 12, pp. 1067-1076, 2014. https://doi.org/10.7736/KSPE.2014.31.12.1067
  8. Wegrzyn, T. F., Golding, M., and Archer, R. H., "Food Layered Manufacture: A New Process for Constructing Solid Foods," Trends in Food Science and Technology, Vol. 27, No. 2, pp. 66-72, 2012. https://doi.org/10.1016/j.tifs.2012.04.006
  9. Lipton, J. I., Cutler, M., Nigl, F., Cohen, D., and Lipson, H., “Additive Manufacturing for the Food Industry,” Trends in Food Science and Technology, Vol. 43, No. 1, pp. 114-123, 2015. https://doi.org/10.1016/j.tifs.2015.02.004
  10. Hao, L., Mellor, S., Seaman, O., Henderson, J., Sewell, N., et al., “Material Characterisation and Process Development for Chocolate Additive Layer Manufacturing,” Virtual and Physical Prototyping, Vol. 5, No. 2, pp. 57-64, 2010. https://doi.org/10.1080/17452751003753212
  11. Afoakwa, E. O., Paterson, A., and Fowler, M., “Factors Influencing Rheological and Textural Qualities in Chocolate-A Review,” Trends in Food Science and Technology, Vol. 18, No. 6, pp. 290-298, 2007. https://doi.org/10.1016/j.tifs.2007.02.002
  12. Talbot, G., "Chocolate and Cocoa Butter-Structure and Composition," in Cocoa Butter and Related Compounds, Garti, N. and Widlak, N. R. (Eds.), AOCS Press, pp. 1-21, 2012.
  13. Beckett, S. T., "Industrial Chocolate Manufacture and Use," Blackwell, 2011.
  14. Wijnen, B., Hunt, E. J., Anzalone, G. C., and Pearce, J. M., "Open-Source Syringe Pump Library," PLoS One, Vol. 9, No. 9, Paper No. 107216, 2014.
  15. RepRapWiki, "Marlin," http://reprap.org/wiki/Marlin (Accessed 9 MAR 2017)
  16. Loisel, C., Keller, G., Lecq, G., Bourgaux, C., and Ollivon, M., "Phase Transitions and Polymorphism of Cocoa Butter," Journal of the American Oil Chemists's Society, Vol. 75, No. 4, pp. 425-439, 2010.
  17. Callebaut Chocolate, "How to Temper by Microwave," https://youtu.be/7MwjSUdcFI0 (Accessed 9 MAR 2017)
  18. Slic3r Manual, "Flow Math," http://manual.slic3r.org/advanced/flow-math (Accessed 9 MAR 2017)