Advances in concrete construction

  • 제5권1호
  • /
  • Pages.17-29
  • /
  • 2017
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Improving compressive strength of low calcium fly ash geopolymer concrete with alccofine

  • Jindal, Bharat Bhushan (IK Gujral Punjab Technical University) ;
  • Singhal, Dhirendra (Department of Civil Engineering, DCRUST Murthal) ;
  • Sharma, Sanjay K. (Department of Civil Engineering, NITTTR) ;
  • Ashish, Deepankar K. (Maharaja Agrasen Institute of Technology, Maharaja Agrasen University) ;
  • Parveen, Parveen (Department of Civil Engineering, DCRUST Murthal)
  • 투고 : 2017.01.26
  • 심사 : 2017.02.15
  • 발행 : 2017.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

Geopolymer concrete is environmentally friendly and could be considered as a construction material to promote the sustainable development. In this paper fly ash based geopolymer concretes with different percentages of alccofine were made by mixing sodium hydroxide and sodium silicate as an alkaline activator and cured at ambient as well as heat environment in an electric oven at $90^{\circ}C$. Effects of various parameters such as the percentage of alccofine, curing temperature, a period of curing, fly ash content, was studied on compressive strength as well as workability of geopolymer concrete. The study concludes that the presence of alccofine improves the properties of geopolymer concrete during a fresh and hardened state of concrete. Geopolymer concrete in the presence of alccofine can be used for the general purpose of concrete as required compressive strength can be achieved even at ambient temperature. The 28 days compressive strength of 73 MPa, when cured at 90-degree Celsius, confirmed that it is also very suitable for precast concrete components.

키워드

참고문헌

  1. Adak, D., Sarkar, M. and Mandal, S. (2014), "Effect of nano-silica on strength and durability of fly ash based geopolymer mortar", Constr. Build. Mater., 70, 453-459. https://doi.org/10.1016/j.conbuildmat.2014.07.093
  2. Adam, A.A. (2009), "Strength and durability properties of alkali activated slag and fly ash-based geopolymer concrete", Ph.D. Dissertation, RMIT University, Melbourne, Australia.
  3. Adam, A.A. and Horianto, X.X.X. (2014), "The effect of temperature and duration of curing on the strength of fly ash based geopolymer mortar", Proc. Eng., 95, 410-414. https://doi.org/10.1016/j.proeng.2014.12.199
  4. Aredes, F.G.M., Campos, T.M.B., Machado, J.P.B., Sakane, K.K., Thim, G.P. and Brunelli, D.D. (2015), "Effect of cure temperature on the formation of metakaolinite-based geopolymer", Ceram., 41(6), 7302-7311. https://doi.org/10.1016/j.ceramint.2015.02.022
  5. BIS 516 (1959), Methods of Tests for Strength of Concrete, New Delhi, India.
  6. BIS 1199 (1959), Method of Sampling and Analysis of Concrete, New Delhi, India.
  7. BIS 2386 (1963), Methods of Test for Aggregates Concrete-Part I Particle Size and Shape, New Delhi, India.
  8. BIS 383 (1970), Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, New Delhi, India.
  9. BIS 7320 (1974), Indian Standard Specification for Concrete Slump Test Apparatus, New Delhi, India.
  10. BIS 9103 (1999), Concrete Admixtures-Specification, New Delhi, India.
  11. BIS 456 (2000), Plain and Reinforced Concrete-Code of Practice, New Delhi, India.
  12. BIS 3812 (2003), Pulverized Fuel Ash-Specifications, New Delhi, India.
  13. Buchwald, A. (2006). "What are geopolymers? Current state of research and technology, the opportunities they offer, and their significance for the precast industry", Betonwerk und Fertigteil-Technik, 72(7), 42-49.
  14. Chindaprasirt, P., Chareerat, T. and Sirivivatnanon, V. (2007), "Workability and strength of coarse high calcium fly ash geopolymer", Cement Concrete Compos., 29(3), 224-229. https://doi.org/10.1016/j.cemconcomp.2006.11.002
  15. Cross, D., Stephens, J. and Vollmer, J. (2005), "Field trials of 100% fly ash concrete", Concrete, 27(9), 47-51.
  16. Davidovits, J. (1988), "Soft mineralogy and geopolymers", Proceedings of the 88th International Conference on Geopolymer, Universite de Technologie, Compiegne, France.
  17. Davidovits, J. (1994a), "Global warming impact on the cement and aggregates industries", World Res. Rev., 6(2), 263-278.
  18. Davidovits, J. (1994b), "High alkali cements for 21st century concretes", Struct. Eng. Mech., 144, 383-398.
  19. Duan, P.C., Yan, W., Zhou, W., Luo, W. and Shen, C. (2015), "An investigation of the microstructure and durability of a fluidized bed fly ash-metakaolin geopolymer after heat and acid exposure", Mater. Des., 74, 125-137. https://doi.org/10.1016/j.matdes.2015.03.009
  20. Fernandez-Jimenez, A., Garcia-Lodeiro, I. and Palomo, A. (2007), "Durability of alkali-activated fly ash cementitious materials", J. Mater. Sci., 42(9), 3055-3065. https://doi.org/10.1007/s10853-006-0584-8
  21. Garcia-Lodeiro, I., Palomo, A. and Fernandez-Jimenez, A. (2007), "Alkali-aggregate reaction in activated fly ash systems", Cement Concrete Res., 37(2), 175-183. https://doi.org/10.1016/j.cemconres.2006.11.002
  22. Green, J. (2015), "Global demand for cement to reach 5.2 billiont".
  23. Ganesan, N., Indira, P.V. and Santhakumar, A. (2013), "Engineering properties of steel fibre reinforced geopolymer concrete", Adv. Concrete Constr., 1(4), 305-318. https://doi.org/10.12989/acc2013.1.4.305
  24. Hardjito, D. (2005), "Studies of fly ash-based geopolymer concrete", Ph.D. Dissertation, Curtin University of Technology, Australia.
  25. Hardjito, D., Wallah, S.E. and Rangan, B.V. (2002), "Research into engineering properties of geopolymer concrete", Proceedings of the International Conference on 'Geopolymer 2002-tur potential into profit‟, Melbourne, Australia, October.
  26. Jain, A.K. (2016), Status of Availability, Utilization and Potential of Fly Ash Use in Construction, UltraTech Cement Ltd.
  27. Jindal, B.B., Anand, A. and Badal, A. (2016), "Development of high strength fly ash based geopolymer concrete with alccofine", IOSR J. Mech. Civ. Eng., 55-58.
  28. Junaid, M.T., Kayali, O., Khennane, A. and Black, J. (2015), "A mix design procedure for low calcium alkali activated fly ash-based concretes", Constr. Build. Mater., 79, 301-310. https://doi.org/10.1016/j.conbuildmat.2015.01.048
  29. Kumar, S., Kumar, R. and Mehrotra, S.P. (2010), "Influence of granulated blast furnace slag on the reaction, structure and properties of fly ash based geopolymer", J. Mater. Sci., 45(3), 607-615. https://doi.org/10.1007/s10853-009-3934-5
  30. Lloyd, N. and Rangan, B.V. (2010), "Geopolymer concrete with fly ash", Proceedings of the 2nd International Conference on Sustainable Construction Materials and Technologies, Ancona, Italy, June.
  31. Malhotra, V.M. (1999), "Making concrete "greener" with fly ash", Concrete., 21(5), 61-66.
  32. McLellan, B.C., Williams, R.P., Lay, J., Riessen, A.V. and Corder, G.D. (2011), "Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement", J. Clean. Prod., 19(9), 1080-1090. https://doi.org/10.1016/j.jclepro.2011.02.010
  33. Mehta, P.K. (2001), "Reducing the environmental impact of concrete", Concrete, 23(10), 61-66.
  34. Olivia, M. and Nikraz, H.R. (2011), "Strength and water penetrability of fly ash geopolymer concrete", ARPN J. Eng. Appl. Sci., 6(7) 70-78.
  35. Nath, P., Sarker, P.K. and Rangan, V.B. (2015), "Early age properties of low-calcium fly ash geopolymer concrete suitable for ambient curing", Proc. Eng., 125, 601-607. https://doi.org/10.1016/j.proeng.2015.11.077
  36. Neupane, K., Kidd, P., Chalmers, D., Baweja, D. and Shrestha, R. (2016), "Investigation on compressive strength development and drying shrinkage of ambient cured powder-activated geopolymer concretes", Austr. J. Civ. Eng., 14(1), 1-12. https://doi.org/10.1080/14488353.2015.1092631
  37. Ozer, I. and Soyer-Uzun, S. (2015), "Relations between the structural characteristics and compressive strength in metakaolin based geopolymers with different molar Si/Al ratios", Ceram., 41(8), 10192-10198. https://doi.org/10.1016/j.ceramint.2015.04.125
  38. Parmar, A., Patel, D.M., Chaudhari, D. and Raol, H. (2014), "Effect of alccofine and fly ash addition on the durability of high performance concrete", J. Eng. Res. Technol., 3(1), 1600-1605.
  39. Patil, A.A., Chore, H. and Dodeb, P. (2014), "Effect of curing condition on strength of geopolymer concrete", Adv. Concrete Constr., 2(1), 29-37. https://doi.org/10.12989/acc.2014.2.1.029
  40. Pawar, M. and Saoji, A. (2013), "Effect of alccofine on self-compacting concrete", J. Eng. Sci., 2(6), 5-9.
  41. Phoongernkham, T., Maegawa, A., Mishima, N., Hatanaka, S. and Chindaprasirt, P. (2015), "Effects of sodium hydroxide and sodium silicate solutions on compressive and shear bond strengths of FA-GBFS geopolymer", Constr. Build. Mater., 91, 1-8. https://doi.org/10.1016/j.conbuildmat.2015.05.001
  42. Prabu, B., Shalini, A. and Kumar, J.K. (2014), "Rice husk ash based geopolymer concrete-a review", Chem. Sci. Rev. Lett., 3, 288-294.
  43. Provis, J.L. and Deventer, J.S.J. (2009), Geopolymers-Structure, Processing, Properties and Industrial Applications, Woodhead Publishing Ltd., Sawston, Cambridge, U.K.
  44. Puertas F. Martinez-Ramiirez S. lonso, S. and Vazquez, T. (2000), "Alkali-activated fly ash/slag cements: Strength behaviour and hydration products", Cement Concrete Res., 30(10), 1625-1632. https://doi.org/10.1016/S0008-8846(00)00298-2
  45. Rangan, B.V., Hardjito, D., Wallah, S.E. and Sumajouw, D.M. (2005), "Studies on fly ash-based geopolymer concrete", Proceedings of the World Congress Geopolymer, Saint Quentin, France.
  46. Shaikh, F.U. (2014), "Effects of alkali solutions on corrosion durability of geopolymer concrete", Adv. Concrete Constr., 2(2), 109-123. https://doi.org/10.12989/acc.2014.2.2.109
  47. Sharma, C. and Jindal, B.B. (2015), "Effect of variation of fly ash on the compressive strength of fly ash based geopolymer concrete", IOSR J. Mech. Civ. Eng., 42-44.
  48. Singh, B., Ishwarya, G., Gupta, M. and Bhattacharyya, S.K. (2015), "Geopolymer concrete: A review of some recent developments", Constr. Build. Mater., 85, 78-90. https://doi.org/10.1016/j.conbuildmat.2015.03.036
  49. Slaty, F., Khoury, H., Rahier, H. and Wastiels, J. (2015), "Durability of alkali activated cement produced from kaolinitic clay", Appl. Clay Sci., 104, 229-237. https://doi.org/10.1016/j.clay.2014.11.037
  50. Suresh, G.P. and Kumar, M. (2013), "Factors influencing compressive strength of geopolymer concrete", J. Res. Eng. Technol., 372-375.
  51. Wallah, S. and Rangan, B.V. (2006), "Low-calcium fly ash-based geopolymer concrete: Long-term properties", Res. Report-GC2, Curtin University, Australia.
  52. Xie, T. and Ozbakkaloglu, T. (2015), "Behavior of low-calcium fly ash bottom ash based geopolymer concrete cured at ambient temperature", Ceram., 85, 5945-5958.

피인용 문헌

  1. Predicting Relationship between Mechanical Properties of Low Calcium Fly Ash-Based Geopolymer Concrete vol.76, pp.4, 2017, https://doi.org/10.1080/0371750X.2017.1412837
  2. Effect of fly ash and GGBS combination on mechanical and durability properties of GPC vol.5, pp.4, 2017, https://doi.org/10.12989/acc.2017.5.4.313
  3. Experimental study on geopolymer concrete prepared using high-silica RHA incorporating alccofine vol.5, pp.4, 2017, https://doi.org/10.12989/acc.2017.5.4.345
  4. Development of mix design method for geopolymer concrete vol.5, pp.4, 2017, https://doi.org/10.12989/acc.2017.5.4.377
  5. Strength and permeation properties of alccofine activated low calcium fly ash geopolymer concrete vol.20, pp.6, 2017, https://doi.org/10.12989/cac.2017.20.6.683
  6. Enhancing mechanical and durability properties of geopolymer concrete with mineral admixture vol.21, pp.3, 2017, https://doi.org/10.12989/cac.2018.21.3.345
  7. Performance of self-compacting geopolymer concrete with and without GGBFS and steel fiber vol.6, pp.4, 2018, https://doi.org/10.12989/acc.2018.6.4.323
  8. Feasibility study of ambient cured geopolymer concrete -A review vol.6, pp.4, 2017, https://doi.org/10.12989/acc.2018.6.4.387
  9. An Experiment Investigation on Physical and Mechanical Properties of High Strength Concrete with Suitable Admixture vol.972, pp.None, 2017, https://doi.org/10.4028/www.scientific.net/msf.972.10
  10. An experimental study on effect of Colloidal Nano-Silica on tetranary blended concrete vol.7, pp.2, 2017, https://doi.org/10.12989/acc.2019.7.2.107
  11. Effect of low-calcium fly ash on sulfate resistance of cement paste under different exposure conditions vol.7, pp.3, 2017, https://doi.org/10.12989/acc.2019.7.3.175
  12. Effect of ultra-fine slag on mechanical and permeability properties of Metakaolin-based sustainable geopolymer concrete vol.7, pp.4, 2017, https://doi.org/10.12989/acc.2019.7.4.231
  13. Mechanical and microstructural study of rice husk ash geopolymer paste with ultrafine slag vol.8, pp.3, 2017, https://doi.org/10.12989/acc.2019.8.3.217
  14. Experimental and microstructural assessment of ternary blended geopolymer concrete with different Na2SiO3-to-NaOH volume ratios vol.5, pp.1, 2017, https://doi.org/10.1007/s41062-020-0279-z
  15. Strength enhancement of concrete incorporating alccofine and SNF based admixture vol.9, pp.4, 2020, https://doi.org/10.12989/acc.2020.9.4.345
  16. A new geopolymeric grout blended completely weathered granite with blast-furnace slag vol.9, pp.6, 2017, https://doi.org/10.12989/acc.2020.9.6.537
  17. Experimental study on concrete using partial replacement of cement by Alccofine fine aggregate as iron powder vol.37, pp.p2, 2017, https://doi.org/10.1016/j.matpr.2020.07.648
  18. Properties of hybrid geopolymer concrete prepared using rice husk ash, fly ash and GGBS with coconut fiber vol.45, pp.p6, 2017, https://doi.org/10.1016/j.matpr.2021.01.390
  19. Effect of molar ratios on strength, microstructure & embodied energy of metakaolin geopolymer vol.11, pp.2, 2021, https://doi.org/10.12989/acc.2021.11.2.127
  20. Incorporating steel slag in the production of high heat resistant FA based geopolymer paste via pressure molding vol.325, pp.None, 2017, https://doi.org/10.1016/j.jclepro.2021.129265
  21. Use of alccofine-1203 in concrete: review on mechanical and durability properties vol.14, pp.6, 2021, https://doi.org/10.1080/19397038.2021.1970275