DOI QR코드

DOI QR Code

Distributed CoAP Handover Using Distributed Mobility Agents in Internet-of-Things Networks

  • Choi, Sang-Il (Future Strategy & Convergence Research Institute, Korea Institute of Civil Engineering and Building Technology) ;
  • Koh, Seok-Joo (School of Computer Science and Engineering, Kyungpook National University)
  • Received : 2016.11.17
  • Accepted : 2016.12.15
  • Published : 2017.03.31

Abstract

The constrained application protocol (CoAP) can be used for remotely controlling various sensor devices in Internet of Things (IoT) networks. In CoAP, to support the handover of a mobile sensor device, service discovery and message transmission needs to be repeated, although doing so would increase the handover delay significantly. To address this limitation of CoAP, a centralized CoAP scheme has been proposed. However, it tends to result in performance degradation for an inter-domain handover case. In this letter, we propose a distributed CoAP handover scheme to support the inter-domain handover. In the proposed scheme, a distributed mobility agent (DMA) is used for managing the location of mobile sensors in a domain and performing handover control operations with its neighboring DMAs in a distributed manner. A performance comparison reveals that the proposed scheme offers a performance improvement of up to 29.5% in terms of the handover delay.

Keywords

References

  1. L. Atzori, A. Lera, and G. Morabito, "The Internet of Things: a survey," Computer Networks, vol. 54, no. 15, pp. 2787-2505, 2010. https://doi.org/10.1016/j.comnet.2010.05.010
  2. R. Khan, S. U. Khan, R. Zaheer, and S. Khan, "Future internet: the internet of things architecture, possible applications and key challenges," in Proceedings of 2012 10th International Conference on Frontiers of Information Technology (FIT), Islamabad, Pakistan, pp. 257-260, 2012.
  3. J. Gubbi, R. Buyya, S. Marusic, and M. Palaniswami, "Internet of Things (IoT): a vision, architectural elements, and future directions," Future Generation Computer Systems, vol. 29, no. 7, pp. 1645-1660, 2013. https://doi.org/10.1016/j.future.2013.01.010
  4. Y. Yin and D. Jiang, "Research and application on intelligent parking solution based on Internet of Things," in Proceedings of 2013 5th International Conference on Intelligent Human-Machine Systems and Cybernetics, Hangzhou, China, pp. 101-105, 2013.
  5. S. E. H. Jensen and R. H. Jacobsen, "Access control with RFID in the Internet of Things," in Proceedings of 2013 27th International Conference on Advanced Information Networking and Application Workshop (WAINA), Barcelona, Spain, pp. 554-559, 2013.
  6. J. Arkko, A. Eriksson, and A. Keranen, "Building power-efficient CoAP device for cellular networks," The Internet Engineering Task Force, Fremont, CA, draft-ietf-lwig-cellular-06, 2016.
  7. C. Bormann, M. Ersue, and A. Keranen, "Terminology for constrained-node networks," The Internet Engineering Task Force, Fremont, CA, RFC 7228, 2014.
  8. Z. Shelby, K. Hartke, and C. Bormann, "The constrained application protocol (CoAP)," The Internet Engineering Task Force, Fremont, CA, RFC 7252, 2014.
  9. A. Rahman and E. Dijk, "Group communication for the constrained application protocol (CoAP)," The Internet Engineering Task Force, Fremont, CA, RFC 7390, 2014.
  10. S. M. Chun, H. S. Kim, and J. T. Park, "CoAP-based mobility management for the Internet of Things," Sensors, vol. 15, no. 7, pp. 16060-16082, 2015. https://doi.org/10.3390/s150716060
  11. M. Gohar and S. J. Koh, "A distributed mobility control scheme in LISP networks," Wireless Networks, vol. 20, no. 2, pp. 245-259, 2014. https://doi.org/10.1007/s11276-013-0605-x

Cited by

  1. Enhanced group communication in constrained application protocol-based Internet-of-things networks vol.14, pp.4, 2017, https://doi.org/10.1177/1550147718772793
  2. Comparison of Step Counting Methods according to the Internal Material Molding Methods for the Module of a Smart Shoe vol.13, pp.1, 2017, https://doi.org/10.7236/ijibc.2021.13.1.90