DOI QR코드

DOI QR Code

침상형 입자의 동적 거동 해석을 위한 강체 막대형 이산요소법 모델 개발

A New Rigid Rod Model for the Discrete Element Method to Analyze the Dynamic Behavior of Needle-shaped Powder

  • 안성해 ((주) 유니크 만해기술연구소) ;
  • 박준영 (금오공과대학교 기계설계공학과)
  • 투고 : 2017.03.24
  • 심사 : 2017.04.11
  • 발행 : 2017.04.30

초록

Numerous studies of the dynamic behavior of powders have been performed by Discrete Element Method (DEM). The behavior of powders can be analyzed using the DEM assuming that the powder is composed of spherical particles. Moreover, the assumption of spherical particle reduces the computing time significantly. However, the biggest problem with this assumption is the real shape of the particles. Some types of particles, such as calcium carbonate and colloidal copper, are needle shaped. Thus, analysis based on spherical particles can produce errors because of the incorrect assumption. In this research, we developed a new model to simulate needle-shaped particles using the DEM. In the model, a series of particles are connected and regarded as a rod. There is no relative motion among the particles. Thus, the behavior of the rod is rigid motion. To validate the developed model, we carried out the drop-and-bounce test with different initial angles. The results showed negligible error of less than 2%.

키워드

참고문헌

  1. Lee, Y. C., Shin, G. H., Kwak, T. S., "Deburring Technology of Vacuum Plate for MLCC Lamination Using Magnetic Abrasive Polishing and ELID Process," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 149-154, 2015. https://doi.org/10.14775/ksmpe.2015.14.3.149
  2. Lee, Y. C., Kim, K. S., Kwak, T. S., Lee, J. R., "An Experimental Study on Magnetic Assisted Polishing of Polycarbonate Plate for Recycling," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 3, pp. 1-6, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.001
  3. Son, C. B., Ryu, M. H., Kwak, J. S., "Determination of Curvature Radius of Magnetic Tool Using Weighted Magnetic Flux Density in Magnetic Abrasive Polishing," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 3, pp. 69-75, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.069
  4. Kwak, T. S., Kwak, J. S., "Magnetic Abrasive Polishing Technology with Ceramic Particles," Journal of the Korean Society for Precision Engineering, Vol. 30, No. 12, pp. 1253-1258, 2013. https://doi.org/10.7736/KSPE.2013.30.12.1253
  5. Cundall, P. A., Strack, O. D. L., "A discrete numerical model for granular assemblies," Geotechnique, Vol. 29, No. 1, pp. 47-65, 1979. https://doi.org/10.1680/geot.1979.29.1.47
  6. Park, J., "Modelling the Dynamics of Fabric in a Horizontal Drum," Doctoral disssertation, Purdue University, U.S., 2003.
  7. Park, J., Kang, N., "Applications of fiber models based on discrete element method to string vibration," Journal of Mechanical Science and Technology, Vol. 23, pp. 372-380, 2009. https://doi.org/10.1007/s12206-008-0921-8

피인용 문헌

  1. Discrete Element Method using the Superposed Rigid-Rod Model for the Dynamic Behavior of Needle-Shaped Powder with a High Aspect Ratio vol.17, pp.3, 2018, https://doi.org/10.14775/ksmpe.2018.17.3.022
  2. Discrete Element Method of the Dynamic Behavior of Flaky Particles Using the Rigid Plate Model vol.2, pp.1, 2020, https://doi.org/10.1007/s42493-020-00036-3