DOI QR코드

DOI QR Code

A Study on the Vibration Analysis of Impeller and Shaft in Cryogenic Submerged Pump

극저온용 액중펌프의 임펠러 및 샤프트 진동해석에 관한 연구

  • Kweon, Byung Soo (Graduate School, Gyeognam National University of Science and Technology) ;
  • Lee, Chi-Woo (Gyeongnam National University of Science and Technology, Automotive Engineering) ;
  • Shin, Yoo In (Gyeongsang National University, Industry-University Convergence District Development Agency) ;
  • Yi, Chung-Seob (Gyeognam National University of Science and Technology, Engine Parts Verification Center)
  • 권병수 (경남과학기술대학교 대학원) ;
  • 이치우 (경남과학기술대학교 자동차공학과) ;
  • 신유인 (경상대학교 산학융합지구조성사업단) ;
  • 이중섭 (경남과학기술대학교 엔진부품검증센터)
  • Received : 2017.02.16
  • Accepted : 2017.03.08
  • Published : 2017.04.30

Abstract

In this research, reverse engineering was applied to the product manufactured by "Vanzetti" from Italy to develop a localized cryogenic submerged pump used in small-scale LNG liquefaction plants. The results of modal analysis of the impeller and shaft confirmed that the resonance frequency of the impeller and shaft played an important role in the rotor. Modal analysis of the rotor confirmed that the forcing frequency had no influence on the resonance phenomenon.

Keywords

References

  1. Kweon. B. S., Lee. C. W., Yi. C. S., "A Study on the Impeller Design of a Submerged Cryogenic Pump," J. of KSMPE, Vol. 15, No. 6, pp. 136-141, 2016.
  2. Ahn. H. H., Yi. C. S., "Flip-Flap Valve-Type Breakaway Coupling through Reverse Engineering," J. of KSMPE, Vol. 15, No. 4, pp. 16-22, 2016.
  3. Jeong, H. S., Kim, Y. H., Cho, J. R., Kim, J. H., Kim, J. R., Park, J. H., "A Study on Structural Design of Cryogenic Miniature Globe Valve using Finite Element Method," J. of KSOME, Vol. 31, No. 4, pp. 343-349, 2007.
  4. Jeon. E. C., Youn. G. H., Kang. C. H., "A Study on Effect of Flow Characteristics for Turbine Impeller Shape," J. of KSMPE, Vol. 13, No. 4, pp. 36-43, 2014. https://doi.org/10.14775/ksmpe.2014.13.4.036
  5. Choi. D. S., "Structural Analysis and Design of Small Wind Turbine Blade," J. of KSMPE, Vol. 14, No. 1, pp. 85-91, 2015.
  6. Kim. H. Y., Yoo. H. H., "Vibration Analysis of a Rotating Blade Considering Pre-twist Angle, Cross Section Taper and a Concentrated Mass," Transactions of KSNVE, Vol. 23, No. 4, pp. 338-346, 2013 https://doi.org/10.5050/KSNVE.2013.23.4.338
  7. Kwon. S. M., Kang. M. J., Yoo. H. H., "Stability Analysis of a Wind Turbine Blade Considering Wind Force and Variation of Pitch Angle," Transactions of KSNVE, Vol. 22, No. 12, pp. 1164-1171, 2012. https://doi.org/10.5050/KSNVE.2012.22.12.1164
  8. Kang. B. M., Oh. Y. C., Bae. D. G., Seo. K. C., Ko. J. Y., "A Study on Shaft Dynamic Characteristic for G/T 250TON Double-Ended Car-Ferry," J. of KSMES, Vol. 21, No. 1, pp. 83-90, 2015

Cited by

  1. FEM 시뮬레이션을 이용한 임펠러의 구조 안전성 평가 vol.43, pp.4, 2020, https://doi.org/10.11627/jkise.2020.43.4.041