Wind and Structures

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Agglomeration effects on the buckling behaviour of embedded concrete columns reinforced with SiO2 nano-particles

  • Zamanian, Mohammad (Department of Civil Engineering, Jasb Branch, Islamic Azad University) ;
  • Kolahchi, Reza (Department of Civil Engineering, Jasb Branch, Islamic Azad University) ;
  • Bidgoli, Mahmood Rabani (Department of Civil Engineering, Jasb Branch, Islamic Azad University)
  • Received : 2016.10.11
  • Accepted : 2016.11.21
  • Published : 2017.01.25
⟨ Previous Next ⟩

Abstract

The use of nanotechnology materials and applications in the construction industry should be considered for enhancing material properties. However, the nonlinear buckling of an embedded straight concrete columns reinforced with silicon dioxide ($SiO_2$) nanoparticles is investigated in the present study. The column is simulated mathematically with Euler-Bernoulli and Timoshenko beam models. Agglomeration effects and the characteristics of the equivalent composite are determined using Mori-Tanaka approach. The foundation around the column is simulated with spring and shear layer. The governing equations are derived using energy method and Hamilton's principal. Differential quadrature method (DQM) is used in order to obtain the buckling load of structure. The influences of volume percent of $SiO_2$ nanoparticles, geometrical parameters and agglomeration on the buckling of column are investigated. Numerical results indicate that considering agglomeration effects leads to decrease in buckling load of structure.

Keywords

References

  1. Babazadeh, A., Burgueno, R. and Silva, P.F. (2016), "Evaluation of the critical plastic region length in slender reinforced concrete bridge columns", Eng. Struct., 125, 280-293. https://doi.org/10.1016/j.engstruct.2016.07.021
  2. Beaudoin, J.J. (1999), "Why engineers need materials science", Concrete Int., 21, 86-89.
  3. Bhushan, B. (2004), Handbook of Nanotechnology, Springer.
  4. Brush, D.O. and Almroth, B.O. (1975), Buckling of bars, plates and shells, McGraw-Hill, New York.
  5. Collepardi, M., Ogoumah-Olagot, J.J., Skarp, U. and Troli, R. (2002), "Influence of amorphous colloidal silica on the properties of self-compacting concretes", Proceedings of the International Conference. Challenges in Concrete Construction - Innovations and Developments in Concrete Materials and Construction, Dundee, UK.
  6. Corradi, M., Khurana, R. and Magarotto, R. (2004), "Controlling performance in ready mixed concrete", Concrete Int., 26(8), 123-126.
  7. Dalton, A.B., Collins, S., Razal, S.J., Munoz, E., Ebron, V.H., Kim, B.G., Coleman, J.N., Ferraris, J.P. and Baughman, R.H. (2004), "Continuous carbon nanotube composite fibers: properties, potential applications, and problems", J. Mater. Chem., 14, 1-13. https://doi.org/10.1039/b312092a
  8. Flores, I., Sobolev, K., Torres, L.M., Valdez, P.L., Zarazua, E. and Cuellar, E.L. (2010), "Performance of cement systems with nano-$SiO_2$ particles produced using sol-gel method", Proceedings of the TRB First International Conference in North America on Nanotechnology in Cement and Concrete, Irvine, California, USA, May 5-7.
  9. Ghorbanpour Arani, A., Kolahchi, R. and Zarei, M. Sh. (2015), "Visco-surface-nonlocal piezoelasticity effects on nonlinear dynamic stability of graphene sheets integrated with ZnO sensors and actuators using refined zigzag theory", Compos. Struct., 132, 506-526. https://doi.org/10.1016/j.compstruct.2015.05.065
  10. Jafarian Arani, A. and Kolahchi, R. (2016), "Buckling analysis of embedded concrete columns armed with carbon nanotubes", Comput. Concrete, 17(5), 567-578. https://doi.org/10.12989/cac.2016.17.5.567
  11. Jo, B.W., Kim, C.H. and Lim, J.H. (2007), "Investigations on the development of powder concrete with nano-$SiO_2$ particles", J. Civil Eng. - KSCE, 11(1), 37-42.
  12. Kolahchi, R. and and Moniribidgoli, A.M. (2016b), "Size-dependent sinusoidal beam model for dynamic instability of single-walled carbon nanotubes", Appl. Math. Mech., 37, 265-274. https://doi.org/10.1007/s10483-016-2030-8
  13. Kolahchi, R., Rabani Bidgoli, M., Beygipoor, Gh. and Fakhar, M.H. (2015), "A nonlocal nonlinear analysis for buckling in embedded FG-SWCNT-reinforced microplates subjected to magnetic field", J. Mech. Sci. Tech., 29(9), 3669-3677. https://doi.org/10.1007/s12206-015-0811-9
  14. Kolahchi, R., Safari, M. and Esmailpour, M. (2016a), "Dynamic stability analysis of temperature-dependent functionally graded CNT-reinforced visco-plates resting on orthotropic elastomeric medium", Compos. Struct., 150, 255-265. https://doi.org/10.1016/j.compstruct.2016.05.023
  15. Mart, J. and Mijangos, C. (2009), "Tailored polymer-based nanofibers and nanotubes by means of different infiltration methods into alumina nanopores", Langmuir, 25(2), 1181-1187. https://doi.org/10.1021/la803127w
  16. Mori, T. and Tanaka, K. (1973), "Average stress in matrix and average elastic energy of materials with misfitting inclusions", Acta Metall. Mat., 21(5), 571- 574. https://doi.org/10.1016/0001-6160(73)90064-3
  17. Penumadu, D., Dutta, A.K., Luo, X. and Thomas, K.G. (2009), "Nano and neutron science applications for geomechanics", J. Civil Eng.- KSCE, 13(4), 233-242.
  18. Plassard, C., Lesniewska, E., Pochard, I. and Nonat, A. (2004), "Investigation of the surface structure and elastic properties of calcium silicate hydrates at the nanoscale", Ultramicroscopy, 100(3-4), 331-338. https://doi.org/10.1016/j.ultramic.2003.11.012
  19. Sanchez, F. and Sobolev, K. (2010), "Nanotechnology in concrete - A review", Construct. Build. Mater., 24(11), 2060-2071. https://doi.org/10.1016/j.conbuildmat.2010.03.014
  20. Scrivener, K.L. (2009), Nanotechnology and cementitious materials, Proceed NICOM3 (3rd Int Symp Nanotech Const, Prague, Czech Republic.
  21. Shi, D.L. and Feng, X.Q. (2004), "The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composties", J. Eng. Mat. Tech., 126(3), 250-270. https://doi.org/10.1115/1.1751182
  22. Sobolev, K. and Ferrada-Gutierrez, M. (2005), "How nanotechnology can change the concrete world: Part 2", The Americ. Ceramic Soc., 11, 16-19.
  23. Trtik, P. and Bartos, P.J.M. (2001), "Nanotechnology and concrete: what can we utilise from the upcoming technologies?", Proceedings of the 2nd Annamaria Workshop: Cement Concrete : Trends & Challenges.
  24. Zhou, X., Liu, J., Wang, X. and Frank Chen, Y. (2016), "Behavior and design of slender circular tubed-reinforced-concrete columns subjected to eccentric compression", Eng. Struct., 124, 1 17-28.

Cited by

  1. Fuzzy relaxed-finite step size method to enhance the instability of the fuzzy first-order reliability method using conjugate discrete map vol.91, pp.3, 2018, https://doi.org/10.1007/s11071-017-3957-4
  2. Earthquake induced dynamic deflection of submerged viscoelastic cylindrical shell reinforced by agglomerated CNTs considering thermal and moisture effects vol.187, 2018, https://doi.org/10.1016/j.compstruct.2017.12.004
  3. Thermo-electro-mechanical vibration analysis of piezoelectric nanoplates resting on viscoelastic foundation with various boundary conditions vol.131-132, 2017, https://doi.org/10.1016/j.ijmecsci.2017.08.031
  4. Validation simulation for free vibration and buckling of cracked Mindlin plates using phase-field method pp.1537-6532, 2018, https://doi.org/10.1080/15376494.2018.1430262
  5. Vibration Analysis of Nano Beam Using Differential Transform Method Including Thermal Effect vol.54, pp.1661-9897, 2018, https://doi.org/10.4028/www.scientific.net/JNanoR.54.1
  6. Concrete columns reinforced with Zinc Oxide nanoparticles subjected to electric field: buckling analysis vol.24, pp.5, 2017, https://doi.org/10.12989/was.2017.24.5.431
  7. Dynamic stability of FG-CNT-reinforced viscoelastic micro cylindrical shells resting on nonhomogeneous orthotropic viscoelastic medium subjected to harmonic temperature distribution and 2D magnetic fi vol.25, pp.2, 2017, https://doi.org/10.12989/was.2017.25.2.131
  8. A new quasi-3D HSDT for buckling and vibration of FG plate vol.64, pp.6, 2017, https://doi.org/10.12989/sem.2017.64.6.737
  9. A novel four variable refined plate theory for wave propagation in functionally graded material plates vol.27, pp.1, 2018, https://doi.org/10.12989/scs.2018.27.1.109
  10. Improved HSDT accounting for effect of thickness stretching in advanced composite plates vol.66, pp.1, 2017, https://doi.org/10.12989/sem.2018.66.1.061
  11. A novel shear deformation theory for buckling analysis of single layer graphene sheet based on nonlocal elasticity theory vol.21, pp.4, 2017, https://doi.org/10.12989/sss.2018.21.4.397
  12. Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates vol.14, pp.6, 2017, https://doi.org/10.12989/gae.2018.14.6.519
  13. Vibration and instability of nanocomposite pipes conveying fluid mixed by nanoparticles resting on viscoelastic foundation vol.21, pp.5, 2018, https://doi.org/10.12989/cac.2018.21.5.569
  14. Mathematical modeling of smart nanoparticles-reinforced concrete foundations: Vibration analysis vol.27, pp.4, 2017, https://doi.org/10.12989/scs.2018.27.4.465
  15. A novel four-unknown quasi-3D shear deformation theory for functionally graded plates vol.27, pp.5, 2017, https://doi.org/10.12989/scs.2018.27.5.599
  16. A new nonlocal HSDT for analysis of stability of single layer graphene sheet vol.6, pp.2, 2017, https://doi.org/10.12989/anr.2018.6.2.147
  17. Thermal buckling of FGM beams having parabolic thickness variation and temperature dependent materials vol.27, pp.6, 2017, https://doi.org/10.12989/scs.2018.27.6.777
  18. Buckling analysis of new quasi-3D FG nanobeams based on nonlocal strain gradient elasticity theory and variable length scale parameter vol.28, pp.1, 2017, https://doi.org/10.12989/scs.2018.28.1.013
  19. The critical buckling load of reinforced nanocomposite porous plates vol.67, pp.2, 2017, https://doi.org/10.12989/sem.2018.67.2.115
  20. Single variable shear deformation model for bending analysis of thick beams vol.67, pp.3, 2017, https://doi.org/10.12989/sem.2018.67.3.291
  21. Numerical study for vibration response of concrete beams reinforced by nanoparticles vol.67, pp.3, 2018, https://doi.org/10.12989/sem.2018.67.3.311
  22. A new plate model for vibration response of advanced composite plates in thermal environment vol.67, pp.4, 2017, https://doi.org/10.12989/sem.2018.67.4.369
  23. Effect of homogenization models on stress analysis of functionally graded plates vol.67, pp.5, 2018, https://doi.org/10.12989/sem.2018.67.5.527
  24. Analysis of wave propagation and free vibration of functionally graded porous material beam with a novel four variable refined theory vol.15, pp.4, 2018, https://doi.org/10.12989/eas.2018.15.4.369
  25. A refined quasi-3D hybrid-type higher order shear deformation theory for bending and Free vibration analysis of advanced composites beams vol.27, pp.4, 2017, https://doi.org/10.12989/was.2018.27.4.269
  26. Dynamic and bending analysis of carbon nanotube-reinforced composite plates with elastic foundation vol.27, pp.5, 2018, https://doi.org/10.12989/was.2018.27.5.311
  27. Critical buckling loads of carbon nanotube embedded in Kerr's medium vol.6, pp.4, 2017, https://doi.org/10.12989/anr.2018.6.4.339
  28. Dynamic investigation of porous functionally graded beam using a sinusoidal shear deformation theory vol.28, pp.1, 2017, https://doi.org/10.12989/was.2019.28.1.019
  29. Dynamic and wave propagation investigation of FGM plates with porosities using a four variable plate theory vol.28, pp.1, 2017, https://doi.org/10.12989/was.2019.28.1.049
  30. A novel refined shear deformation theory for the buckling analysis of thick isotropic plates vol.69, pp.3, 2019, https://doi.org/10.12989/sem.2019.69.3.335
  31. Dynamic analysis of concrete column reinforced with Sio2 nanoparticles subjected to blast load vol.7, pp.1, 2017, https://doi.org/10.12989/acc.2019.7.1.051
  32. Vibration response and wave propagation in FG plates resting on elastic foundations using HSDT vol.69, pp.5, 2017, https://doi.org/10.12989/sem.2019.69.5.511
  33. Vibration analysis of different material distributions of functionally graded microbeam vol.69, pp.6, 2017, https://doi.org/10.12989/sem.2019.69.6.637
  34. Effect of agglomerated zirconia-toughened mullite on the mechanical properties of giant cane fiber mat epoxy laminated composites vol.70, pp.2, 2019, https://doi.org/10.12989/sem.2019.70.2.233
  35. A simple HSDT for bending, buckling and dynamic behavior of laminated composite plates vol.70, pp.3, 2019, https://doi.org/10.12989/sem.2019.70.3.325
  36. Improved analytical method for adhesive stresses in plated beam: Effect of shear deformation vol.7, pp.3, 2017, https://doi.org/10.12989/acc.2019.7.3.151
  37. A simple quasi-3D HSDT for the dynamics analysis of FG thick plate on elastic foundation vol.31, pp.5, 2017, https://doi.org/10.12989/scs.2019.31.5.503
  38. Robust quasi 3D computational model for mechanical response of FG thick sandwich plate vol.70, pp.5, 2019, https://doi.org/10.12989/sem.2019.70.5.571
  39. Vibration analysis of nonlocal porous nanobeams made of functionally graded material vol.7, pp.5, 2019, https://doi.org/10.12989/anr.2019.7.5.351
  40. Bending analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal and mechanical loadings vol.33, pp.1, 2017, https://doi.org/10.12989/scs.2019.33.1.081
  41. A Non-Linear Spring Model for Predicting Modal Behavior of Oscillators Built from Double Walled Carbon Nanotubes vol.60, pp.None, 2017, https://doi.org/10.4028/www.scientific.net/jnanor.60.21
  42. Nonlocal effect on the vibration of armchair and zigzag SWCNTs with bending rigidity vol.7, pp.6, 2017, https://doi.org/10.12989/anr.2019.7.6.431
  43. On the modeling of dynamic behavior of composite plates using a simple nth-HSDT vol.29, pp.6, 2017, https://doi.org/10.12989/was.2019.29.6.371
  44. Buckling and dynamic behavior of the simply supported CNT-RC beams using an integral-first shear deformation theory vol.25, pp.2, 2020, https://doi.org/10.12989/cac.2020.25.2.155
  45. Nonlocal vibration of DWCNTs based on Flügge shell model using wave propagation approach vol.34, pp.4, 2020, https://doi.org/10.12989/scs.2020.34.4.599
  46. Buckling load optimization of beam reinforced by nanoparticles vol.73, pp.5, 2017, https://doi.org/10.12989/sem.2020.73.5.481
  47. Numerical study for nonlocal vibration of orthotropic SWCNTs based on Kelvin's model vol.9, pp.3, 2017, https://doi.org/10.12989/acc.2020.9.3.301
  48. Experimental and numerical bending deflection of cenosphere filled hybrid (Glass/Cenosphere/Epoxy) composite vol.73, pp.6, 2017, https://doi.org/10.12989/sem.2020.73.6.715
  49. A Review on Bubble Stability in Fresh Concrete: Mechanisms and Main Factors vol.13, pp.8, 2017, https://doi.org/10.3390/ma13081820
  50. A refined HSDT for bending and dynamic analysis of FGM plates vol.74, pp.1, 2020, https://doi.org/10.12989/sem.2020.74.1.105
  51. Eringen's nonlocal model sandwich with Kelvin's theory for vibration of DWCNT vol.25, pp.4, 2017, https://doi.org/10.12989/cac.2020.25.4.343
  52. Thermal flexural analysis of anti-symmetric cross-ply laminated plates using a four variable refined theory vol.25, pp.4, 2017, https://doi.org/10.12989/sss.2020.25.4.409
  53. Effects of elastic medium on buckling of microtubules due to bending and torsion vol.9, pp.5, 2017, https://doi.org/10.12989/acc.2020.9.5.491
  54. Theoretical impact of Kelvin's theory for vibration of double walled carbon nanotubes vol.8, pp.4, 2017, https://doi.org/10.12989/anr.2020.8.4.307
  55. A novel four-unknown integral model for buckling response of FG sandwich plates resting on elastic foundations under various boundary conditions using Galerkin's approach vol.21, pp.5, 2017, https://doi.org/10.12989/gae.2020.21.5.471
  56. Buckling analysis of smart beams based on higher order shear deformation theory and numerical method vol.35, pp.5, 2017, https://doi.org/10.12989/scs.2020.35.5.635
  57. Parametric vibration analysis of single-walled carbon nanotubes based on Sanders shell theory vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.165
  58. Bending and free vibration analysis of functionally graded sandwich plates: An assessment of the Refined Zigzag Theory vol.23, pp.3, 2021, https://doi.org/10.1177/1099636219843970
  59. Optimization and mathematical modelling of multi-layer beam based on sinusoidal theory vol.79, pp.1, 2017, https://doi.org/10.12989/sem.2021.79.1.109