DOI QR코드

DOI QR Code

Strain demand prediction method for buried X80 steel pipelines crossing oblique-reverse faults

  • Liu, Xiaoben (College of Mechanical and Transportation Engineering, China University of Petroleum-Beijing) ;
  • Zhang, Hong (College of Mechanical and Transportation Engineering, China University of Petroleum-Beijing) ;
  • Gu, Xiaoting (College of Petroleum Engineering, Yangtze University) ;
  • Chen, Yanfei (College of Mechanical and Transportation Engineering, China University of Petroleum-Beijing) ;
  • Xia, Mengying (College of Mechanical and Transportation Engineering, China University of Petroleum-Beijing) ;
  • Wu, Kai (College of Mechanical and Transportation Engineering, China University of Petroleum-Beijing)
  • 투고 : 2016.12.27
  • 심사 : 2017.03.10
  • 발행 : 2017.03.25

초록

The reverse fault is a dangerous geological hazard faced by buried steel pipelines. Permanent ground deformation along the fault trace will induce large compressive strain leading to buckling failure of the pipe. A hybrid pipe-shell element based numerical model programed by INP code supported by ABAQUS solver was proposed in this study to explore the strain performance of buried X80 steel pipeline under reverse fault displacement. Accuracy of the numerical model was validated by previous full scale experimental results. Based on this model, parametric analysis was conducted to study the effects of four main kinds of parameters, e.g., pipe parameters, fault parameters, load parameter and soil property parameters, on the strain demand. Based on 2340 peak strain results of various combinations of design parameters, a semi-empirical model for strain demand prediction of X80 pipeline at reverse fault crossings was proposed. In general, reverse faults encountered by pipelines are involved in 3D oblique reverse faults, which can be considered as a combination of reverse fault and strike-slip fault. So a compressive strain demand estimation procedure for X80 pipeline crossing oblique-reverse faults was proposed by combining the presented semi-empirical model and the previous one for compression strike-slip fault (Liu 2016). Accuracy and efficiency of this proposed method was validated by fifteen design cases faced by the Second West to East Gas pipeline. The proposed method can be directly applied to the strain based design of X80 steel pipeline crossing oblique-reverse faults, with much higher efficiency than common numerical models.

키워드

과제정보

연구 과제 주관 기관 : CNPC, Dalian University of Technology, Shanghai Jiao Tong University, Tianjin University, Science Foundation of China University of Petroleum

참고문헌

  1. ABAQUS (2011), ABAQUS user's manual, version 6.11, Simulia, USA.
  2. American Lifelines Alliance-ASCE (2001), Guidelines for the design of buried steel pipe. ASCE, USA.
  3. American Society of Mechanical Engineers, B31.8 (2007), Gas transmission and distribution piping systems. ASME, USA.
  4. Canadian Standards Association, Z662 (2007), Oil and gas pipeline systems. CSA, Canada.
  5. European Committee For Standardization, EN 1998 (1998), Design of structures for earthquake resistance. Part 4. Silos, tanks and pipelines.
  6. Gantes, C.J. and Bouckovalas, G.D. (2013), "Seismic verification of the high pressure natural gas pipeline Komotini-Alexandroupolis-Kipi in areas of active fault crossings", Struct. Eng. Int., 23(2), 204-208. https://doi.org/10.2749/101686613X13439149157164
  7. Gu, X. and Zhang, H. (2009), "Research on aseismatic measures of gas pipeline crossing a fault for strain-based design", ASME 2009 Pressure Vessels and Piping Conference, 571-580.
  8. Ha, D. (2007), "Evaluation of ground rupture effect on buried HDPE pipelines", Department of Civil and Environmental Engineering, Rensselaer Polytechnic Institute.
  9. Jalali, H.H., Rofooei, F.R., Attari, N.K.A. and Samadian, M. (2016), "Experimental and finite element study of the reverse faulting effects on buried continuous steel gas pipelines", Soil Dyn. Earthq. Eng., 86, 1-14. https://doi.org/10.1016/j.soildyn.2016.04.006
  10. Joshi, S., Prashant, A., Deb, A. and Jain, S.K. (2011), "Analysis of buried pipelines subjected to reverse fault motion", Soil Dyn. Earthq. Eng., 31(7), 930-940. https://doi.org/10.1016/j.soildyn.2011.02.003
  11. Karamitros, D.K., Bouckovalas, G.D. and Kouretzis, G.P. (2007), "Stress analysis of buried steel pipelines at strike-slip fault crossings", Soil Dyn. Earthq. Eng., 27(3), 200-211. https://doi.org/10.1016/j.soildyn.2006.08.001
  12. Karamitros, D.K., Bouckovalas, G.D., Kouretzis, G.P. and Gkesouli, V. (2011), "An analytical method for strength verification of buried steel pipelines at normal fault crossings", Soil Dyn. Earthq. Eng., 31(11), 1452-1464. https://doi.org/10.1016/j.soildyn.2011.05.012
  13. Karamitros, D.K., Zoupantis, Ch. and Bouckovalas, G.D. (2016), "Buried pipelines with bends: analytical verification against permanent ground displacements", Can. Geotech. J., 53(11), 1782-1793. https://doi.org/10.1139/cgj-2016-0060
  14. Kennedy, R.P., Chow, A.M. and Williamson, R.A. (1977), "Fault movement effects on buried oil pipeline", Transp. Eng. J. Am. Soc. Civ. Eng., 103(6), 617-633.
  15. Liu, A., Hu, Y., Zhao, F., Li, X., Takada, S. and Zhao, L. (2004), "An equivalent-boundary method for the shell analysis of buried pipelines under fault movement", Acta Seismol. Sin. 17(s1), 150-156. https://doi.org/10.1007/s11589-004-0078-1
  16. Liu, B., Liu, X.L. and Zhang, H. (2009), "strain-based design criteria of pipelines", J. Loss Prevent. Proc., 22(6), 884-888. https://doi.org/10.1016/j.jlp.2009.07.010
  17. Liu, M., Wang, Y.Y. and Yu, Z. (2008), "Response of pipelines under fault crossing", Proceedings of the Eighteenth(2008) International Offshore and Polar Engineering Conference, 162-165.
  18. Liu, X.B., Zhang, H. and Chen, Y.F. (2015), "Strain prediction of X80 steel pipeline at strike-slip fault under compression combined with bending", ASME 2015 Pressure Vessels & Piping Conference, Boston, USA.
  19. Liu, X.B., Zhang, H., Han, Y.S., Xia, M.Y. and Zheng, W. (2016), "A semi-empirical model for peak strain prediction of buried X80 steel pipelines under compression and bending at strikeslip fault crossings", J. Nat. Gas Sci. Eng., 32, 465-475. https://doi.org/10.1016/j.jngse.2016.04.054
  20. Liu, X.B., Zhang, H., Li, M., Xia, M.Y., Zheng, W., Wu, K. and Han, Y.S. (2016), "Effects of steel properties on the local buckling response of high strength pipelines subjected to reverse faulting", J. Nat. Gas Sci. Eng., 33, 378-387. https://doi.org/10.1016/j.jngse.2016.05.036
  21. Lower, Mark D. (2014), "Strain-based design methodology of large diameter grade X80 linepipe", Ph.D. dissertation, University of Tennessee.
  22. Melissianos, V.E., Korakitis, G.P., Gantes, C.J. and Bouckovalas, G.D. (2016), "Numerical evaluation of the effectiveness of flexible joints in buried pipelines subjected to strike-slip fault rupture", Soil Dyn. Earthq. Eng., 90, 395-410. https://doi.org/10.1016/j.soildyn.2016.09.012
  23. Melissianos, V.E. and Gantes, C.J. (2016), "Numerical modeling aspects of buried pipeline - fault crossing", Comput. Methods Earthq. Eng., 3, 1-26.
  24. Mohr, W. (2003), "Strain-based design of pipelines - Project No. 45892GTH", Columbus, USA.
  25. Newmark, N.M. and Hall, W.J. (1975), "Pipeline design to resist large fault displacement", The US National Conference on Earthquake Engineering.
  26. O'Rourke, M.J. and Liu, X. (2012), "Seismic design of buried and offshore pipelines", Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo.
  27. Q/SY GJX 0136 (2008), Guideline for strain-based design in seismic area and active fault crossing of the second west-east natural gas transportation pipeline project, PetroChina Co Ltd, China.
  28. Ramberg, W. and Osgood, W.R. (1943), "Description of stressstrain curves by three parameters", Technical Report Archive & Image Library, USA.
  29. Rofooei, F.R., Hojat Jalali, H., Attari Nader, K.A. and Alavi, M. (2012), "Full-scale laboratory testing of buried pipelines subjected to permanent ground displacement caused by reverse faulting", Proceedings of the 15th World Conference on Earthquake Engineering, Lisboa, Portugal, September.
  30. Rofooei, F.R., Jalali, H.H., Attari, N.K.A. and Samadian, M. (2015), "Parametric study of buried steel and high density polyethylene gas pipelines due to oblique-reverse faulting", Can. J. Civ. Eng., 42(3), 178-189. https://doi.org/10.1139/cjce-2014-0047
  31. Saberi, M., Behnamfar, F. and Vafaeian, M. (2013), "A semianalytical model for estimating seismic behavior of buried steel pipes at bend point under propagating waves", Bull. Earthq. Eng., 11(5), 1373-1402. https://doi.org/10.1007/s10518-013-9430-y
  32. Shokouhi, S.K.S., Dolatshah, A. and Ghobakhloo, E. (2013), "Seismic strain analysis of buried pipelines in a fault zone using hybrid FEM-ANN approach", Earthq. Struct., 5(4), 417-438. https://doi.org/10.12989/eas.2013.5.4.417
  33. Takada, S., Hassani, N. and Fukuda, K. (2001), "A new proposal for simplified design of buried steel pipes crossing active faults", Earthq. Eng. Struct. Dyn., 30(8), 1243-1257. https://doi.org/10.1002/eqe.62
  34. Trifonov, O.V. (2014), "Numerical stress-strain analysis of buried steel pipelines crossing active strike-slip faults with an emphasis on fault modeling aspects", J. Pipeline Syst. Eng. Pract., 6(1), 4014008.
  35. Trifonov, O.V. and Cherniy, V.P. (2010), "A semi-analytical approach to a nonlinear stress--strain analysis of buried steel pipelines crossing active faults", Soil Dyn. Earthq. Eng., 30(11), 1298-1308. https://doi.org/10.1016/j.soildyn.2010.06.002
  36. Trifonov, O.V. and Cherniy, V.P. (2012), "Elastoplastic stressstrain analysis of buried steel pipelines subjected to fault fisplacements with account for service loads", Soil Dyn. Earthq. Eng., 33(1), 54-62. https://doi.org/10.1016/j.soildyn.2011.10.001
  37. Uckan, E.B., Anbas, J.S., Wou, R., Paolacci, F. and O'Rourke, M.J. (2015), "A simplified analysis model for determining the seismic response of buried steel pipes at strike-slip fault crossings", Soil Dyn. Earthq. Eng., 75, 55-65. https://doi.org/10.1016/j.soildyn.2015.03.001
  38. Vazouras, P., Karamanos, S.A. and Dakoulas, P. (2010), "Finite element analysis of buried steel pipelines under strike-slip fault displacements", Soil Dyn. Earthq. Eng., 30(11), 1361-1376. https://doi.org/10.1016/j.soildyn.2010.06.011
  39. Vazouras, P., Karamanos, S.A. and Dakoulas, P. (2012), "Mechanical behavior of buried steel pipes crossing active strike-slip faults", Soil Dyn. Earthq. Eng., 41(5), 164-180. https://doi.org/10.1016/j.soildyn.2012.05.012
  40. Vazouras, P., Dakoulas, P. and Karamanos, S.A. (2015), "Pipe--soil interaction and pipeline performance under strike--slip fault movements", Soil Dyn. Earthq. Eng., 72(4), 48-65. https://doi.org/10.1016/j.soildyn.2015.01.014
  41. Wang, L.R.L. and Yeh, Y.H. (1985), "A refined seismic analysis and design of buried pipeline for fault movement", Earthq. Eng. Struct. Dyn., 13(1), 75-96. https://doi.org/10.1002/eqe.4290130109
  42. Xie, X.J. (2008), "Numerical analysis and evaluation of buried pipeline response to earthquake-induced ground fault rupture", Ph.D. dissertation Department of Civil and Environmental Engineering, Rensselaer Polytechnic Institute.
  43. Zhang, J., Liang, Z. and Han, C.J. (2014), "Buckling behavior analysis of buried gas pipeline under strike-slip fault displacement", J. Nat. Gas Sci. Eng., 21, 921-928. https://doi.org/10.1016/j.jngse.2014.10.028
  44. Zheng, W., Zhang, H., Liu, X.B., Liang, L.C. and Han, Y.S. (2016), "Contrastive study on finite element models of highstrength pipelines crossing active faults", Mater. Sci. Forum, 850, 957-964. https://doi.org/10.4028/www.scientific.net/MSF.850.957

피인용 문헌

  1. Local Buckling Behavior and Plastic Deformation Capacity of High-Strength Pipe at Strike-Slip Fault Crossing vol.8, pp.1, 2017, https://doi.org/10.3390/met8010022
  2. Effects of Stress–Strain Characteristics on Local Buckling of X80 Pipe Subjected to Strike-Slip Fault Movement vol.140, pp.4, 2018, https://doi.org/10.1115/1.4040314
  3. Stress and Deformation Analysis of Buried Gas Pipelines Subjected to Buoyancy in Liquefaction Zones vol.11, pp.9, 2018, https://doi.org/10.3390/en11092334
  4. Mechanical response of buried polyethylene pipelines under excavation load during pavement construction vol.90, pp.None, 2017, https://doi.org/10.1016/j.engfailanal.2018.03.027
  5. Dynamic analysis of immersion concrete pipes in water subjected to earthquake load using mathematical methods vol.15, pp.4, 2017, https://doi.org/10.12989/eas.2018.15.4.361
  6. An ANN‐based failure pressure prediction method for buried high‐strength pipes with stray current corrosion defect vol.8, pp.1, 2017, https://doi.org/10.1002/ese3.522
  7. The effect of nanoparticle in reduction of critical fluid velocity in pipes conveying fluid vol.9, pp.1, 2017, https://doi.org/10.12989/acc.2020.9.1.103
  8. A refined analytical strain analysis method for offshore pipeline under strike-slip fault movement considering strain hardening effect of steel vol.15, pp.2, 2017, https://doi.org/10.1080/17445302.2019.1611722
  9. Strain demand prediction of buried steel pipeline at strike-slip fault crossings: A surrogate model approach vol.20, pp.1, 2017, https://doi.org/10.12989/eas.2021.20.1.109