DOI QR코드

DOI QR Code

Exploring the effects of tuned mass dampers on the seismic performance of structures with nonlinear base isolation systems

  • Hessabi, Reza Mirza (Department of Civil Engineering, University of Toronto) ;
  • Mercan, Oya (Department of Civil Engineering, University of Toronto) ;
  • Ozturk, Baki (Civil Engineering Department, Hacettepe University)
  • Received : 2016.05.04
  • Accepted : 2017.02.12
  • Published : 2017.03.25

Abstract

Base isolation is a quite practical control strategy for enhancing the response of structural systems induced by strong ground motions. Due to the dynamic effects of base isolation systems, reduction in the interstory drifts of the superstructure is often achieved at the expense of high base displacement level, which may lead to instability of the structure or non-practical designs for the base isolators. To reduce the base displacement, several hybrid structural control strategies have been studied over the past decades. This study investigates a particular strategy that employs Tuned Mass Dampers (TMDs) for improving the performance of base-isolated structures and unlike previous studies, specifically focuses on the effectiveness of this hybrid control strategy in structures that are equipped with nonlinear base isolation systems. To consider the nonlinearities of base isolation systems, a Bouc-Wen model is selected and nonlinear dynamic OpenSees models are used to perform several time-history simulations in time and frequency domains. Through these numerical simulations, the effects of several parameters such as the fundamental period of the structure, dynamic properties of the TMD and isolation systems and properties of the input ground motion on the behaviour of TMD-structure-base isolation systems are examined. The results of this study provide a better insight into the performance of linear shear-story structures with nonlinear base isolators and show that there are many scenarios in which TMDs can still improve the performance of these systems.

Keywords

References

  1. Alhan, C. and Gavin, H. (2004), "A parametric study of linear and non-linear passively damped seismic isolation systems for buildings", Eng. Struct., 26(4), 485-497. https://doi.org/10.1016/j.engstruct.2003.11.004
  2. Alhan, C. and Surmeli, M. (2011), "Shear building representations of seismically isolated buildings", Bull. Earthq. Eng., 9(5), 1643-1671. https://doi.org/10.1007/s10518-011-9293-z
  3. Chung, L.L., Wu, L.Y., Huang, H.H., Chang, C.H. and Lien, K.H. (2009), "Optimal design theories of tuned mass dampers with nonlinear viscous damping", Earthq. Eng. Eng. Vib., 8(4), 547-560. https://doi.org/10.1007/s11803-009-9115-3
  4. De Iuliis, M., Petti, L. and Palazzo, B. (2008), "Effect of tuned mass damper on displacement demand of base-isolated structures", Eng. Struct., 30(12), 3478-3488. https://doi.org/10.1016/j.engstruct.2008.05.027
  5. Den Hartog, J.P. (1985), Mechanical Vibrations, 4th edition, McGraw-Hill, New York, USA.
  6. Esteki, K., Bagchi, A. and Sedaghati. R. (2015), "Semi-active control of seismic response of a building using MR fluid-based tuned mass damper", Smart Struct. Syst., 16(5), 807-833. https://doi.org/10.12989/sss.2015.16.5.807
  7. Ikhouane, F., Manosa, V. and Rodellar, J. (2007), "Dynamic properties of the hysteretic Bouc-Wen model", Syst. Control Lett., 56(3), 197-205. https://doi.org/10.1016/j.sysconle.2006.09.001
  8. Jennings, P.C. (1968), "Equivalent viscous damping for yielding structures", J. Eng. Mech. Div., 94(1), 103-116.
  9. Kelly, J.M. (1999), "The role of damping in seismic isolation", Earthq. Eng. Struct. Dyn., 28(1), 3-20. https://doi.org/10.1002/(SICI)1096-9845(199901)28:1<3::AID-EQE801>3.0.CO;2-D
  10. Kelly, J.M., Leitmann, G. and Soldatos, A.G. (1987), "Robust control of base-isolated structures under earthquake excitation", J. Optimiz. Theory Appl., 53(2), 159-180. https://doi.org/10.1007/BF00939213
  11. Mahmoud, S., Austrell, P.E. and Jankowski, R. (2012), "Simulation of the response of base-isolated buildings under earthquake excitations considering soil flexibility", Earthq. Eng. Eng. Vib., 11(3), 359-374. https://doi.org/10.1007/s11803-012-0127-z
  12. Matta, E. (2015), "Seismic effectiveness of tuned mass dampers in a life-cycle cost perspective", Earthq. Struct., 9(1), 73-91. https://doi.org/10.12989/eas.2015.9.1.073
  13. Mazza, F. and Vulcano, A. (2009), "Nonlinear response of RC framed buildings with isolation and supplemental damping at the base subjected to near-fault earthquakes", J. Earthq. Eng., 13(5), 690-715. https://doi.org/10.1080/13632460802632302
  14. McKenna, F., Fenves, G.L., Scott, M.H. and Jeremic, B. (2000), Open System for Earthquake Engineering Simulation (OpenSees), Pacific Earthquake Engineering Research Center, University of California, Berkeley, CA.
  15. Mirza Hessabi, R. (2017), Application of real-time hybrid simulation method in experimental identification of gyromass dampers, Ph.D. Dissertation, Civil Engineering Department, University of Toronto, Canada.
  16. Mirza Hessabi, R. and Mercan, O. (2016), "Investigations of the application of gyro-mass dampers with various types of supplemental dampers for vibration control of building structures", Eng. Struct., 126, 174-186. https://doi.org/10.1016/j.engstruct.2016.07.045
  17. Mirza Hessabi, R., Mercan, O. and Ozturk, B. (2014), "The effects of tuned mass dampers on seismic performance of structures with nonlinear base isolators: a parametric study", Proceedings of the 6th World Conference on Structural Control and Health Monitoring (6WCSCM), Barcelona, Spain, July.
  18. Pacific Earthquake Engineering Research Center, Regents of the University of California, Berkeley (2015), Next Generation Attenuation Relationships - Strongmotion Database, Berkeley, USA. Retrieved from http://ngawest2.berkeley.edu/.
  19. Palazzo, B. and Petti, L. (1999), "Combined control strategy: base isolation and tuned mass damping", ISET J. Earthq. Technol., 36(2-4), 121-137.
  20. Palazzo, B., Petti, L. and de Ligio, M. (1997), "Response of base isolated systems equipped with tuned mass dampers to random excitations", J. Struct. Control, 4(1), 9-22. https://doi.org/10.1002/stc.4300040105
  21. Petti, L., Giannattasio, G., De Iuliis, M. and Palazzo, B. (2010), "Small scale experimental testing to verify the effectiveness of the base isolation and tuned mass dampers combined control strategy", Smart Struct. Syst., 6(1), 57-72. https://doi.org/10.12989/sss.2010.6.1.057
  22. Politopoulos, I. (2008), "A review of adverse effects of damping in seismic isolation", Earthq. Eng. Struct. Dyn., 37(3), 447-465. https://doi.org/10.1002/eqe.763
  23. Ribakov, Y. (2010), "Reduction of structural response to near fault earthquakes by seismic isolation columns and variable friction dampers", Earthq. Eng. Eng. Vib., 9(1), 113-122. https://doi.org/10.1007/s11803-010-9059-7
  24. Sinha, S.C. and Li, G. (1994), "Optimal design of base-isolated structure with dynamic absorbers", J. Eng. Mech., 120(2), 221-231. https://doi.org/10.1061/(ASCE)0733-9399(1994)120:2(221)
  25. Taniguchi, T., Der Kiureghian, A. and Melkumyan, M. (2008), "Effect of tuned mass damper on displacement demand of baseisolated structures", Eng. Struct., 30(12), 3478-3488. https://doi.org/10.1016/j.engstruct.2008.05.027
  26. Tsai, H. (1995), "The effect of tuned-mass dampers on the seismic response of base-isolated structures", Int. J. Solid. Struct., 32(8-9), 1195-1210. https://doi.org/10.1016/0020-7683(94)00150-U
  27. Tsai, H-C. and Lin, G-C. (1993), "Optimum tuned-mass dampers for minimizing steady-state response of support-excited and damped systems", Earthq. Eng. Struct. Dyn., 22(11), 957-973. https://doi.org/10.1002/eqe.4290221104
  28. Wen, Y.K. (1976), "Method for random vibration of hysteretic systems", J. Eng. Mech., 102(2), 249-263.
  29. Worden, K. and Tomlinson, G.R. (2001), Nonlinearity in Structural Dynamics: Detection, Identification and Modeling, Institute of Physics Publishing, Bristol, Philadelphia, USA.
  30. Xiang, P. and Nishitani, A. (2014), "Optimum design for more effective tuned mass damper system and its application to baseisolated buildings", Struct. Control Hlth. Monit., 21(1), 98-114. https://doi.org/10.1002/stc.1556
  31. Yang, J.N., Danielians, A. and Liu, S.C. (1990), "Aseismic hybrid control system for building structures under strong earthquake", J. Intel. Mater. Syst. Struct., 1(4), 432-446. https://doi.org/10.1177/1045389X9000100405
  32. Zhang, R. and Phillips, B.M. (2015), "Performance and protection of base-isolated structures under blast loading", J. Eng. Mech., 04015063.

Cited by

  1. Optimal design and seismic performance of tuned mass damper inerter (TMDI) for structures with nonlinear base isolation systems pp.00988847, 2018, https://doi.org/10.1002/eqe.3098
  2. Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost vol.27, pp.5, 2017, https://doi.org/10.12989/scs.2018.27.5.633
  3. Reliability-based design of tuned-mass dampers with soil−structure interaction vol.172, pp.1, 2017, https://doi.org/10.1680/jencm.17.00018
  4. Seismic response control of base‐isolated buildings using multiple tuned mass dampers vol.28, pp.3, 2019, https://doi.org/10.1002/tal.1576
  5. The effect of base isolation and tuned mass dampers on the seismic response of RC high-rise buildings considering soil-structure interaction vol.17, pp.4, 2017, https://doi.org/10.12989/eas.2019.17.4.425
  6. Seismic resilience evaluation of RC-MRFs equipped with passive damping devices vol.18, pp.3, 2017, https://doi.org/10.12989/eas.2020.18.3.391
  7. Using maximum direction of a ground motion in a code-compliant analysis of seismically isolated structures vol.28, pp.None, 2017, https://doi.org/10.1016/j.istruc.2020.10.030
  8. Seismic behavior of MSCSS based on story drift and failure path vol.18, pp.8, 2017, https://doi.org/10.1590/1679-78256787
  9. Closed‐form design formulae for seismically isolated structure with a damping enhanced inerter system vol.28, pp.12, 2017, https://doi.org/10.1002/stc.2840
  10. Direct displacement-based design approach for isolated structures equipped with supplemental fluid viscous damper vol.45, pp.None, 2017, https://doi.org/10.1016/j.jobe.2021.103684