DOI QR코드

DOI QR Code

Numerical modeling of concrete cover cracking due to steel reinforcing bars corrosion

  • 투고 : 2016.06.15
  • 심사 : 2016.11.06
  • 발행 : 2017.03.25

초록

Concrete cover cracking due to the corrosion of steel reinforcing bars is one of the main causes of deterioration in Reinforced Concrete (RC) structures. The oxidation level of the bars causes varying levels of expansion. The rebar expansions could lead to through-thickness cracking of the concrete cover, where depending on the cracking characteristics, the service life of the structures would be affected. In this paper, the effect of geometrical and material parameters, i.e., concrete cover thickness, reinforcing bar diameter, and concrete tensile strength, on the required pressure for concrete cover cracking due to corrosion has been investigated through detailed numerical simulations. ABAQUS finite element software is employed as a modeling platform where the concrete cracking is simulated by means of eXtended Finite Element Method (XFEM). The accuracy of the numerical simulations is verified by comparing the numerical results with experimental data obtained from the literature. Using a previously proposed empirical equation and the numerical model, the time from corrosion initiation to the cover cracking is predicted and then compared to the respective experimental data. Finally, a parametric study is undertaken to determine the optimum ratio of the rebar diameter to the reinforcing bars spacing in order to avoid concrete cover delamination.

키워드

참고문헌

  1. ABAQUS (2011), ABAQUS Documentation, Dassault Systemes, Providence, Rhode Island, USA.
  2. Abdelaziz, Y. and Hamouine, A. (2008), "A survey of the extended finite element", Comput. Struct., 86(11-12), 1141-1151. https://doi.org/10.1016/j.compstruc.2007.11.001
  3. ACI 318 (2011), Building Code Requirements for Structural Concrete (ACI 318-11) and Commentary, American Concrete Institute, Farmington Hills, MI, USA.
  4. Allan, M.L. and Cherry B.W. (1992), "Factors controlling the amount of corrosion for cracking in reinforced concrete", Corros., 48(5), 426-430. https://doi.org/10.5006/1.3315956
  5. Andrade, C., Alonso, C. and Molina, F.J. (1993), "Cover cracking as a function of bar corrosion: Part I-Experimental test", Mater. Struct., 26(8), 453-464. https://doi.org/10.1007/BF02472805
  6. Andrade, C., Alonso, C., Rodriguez, J. and Garcia, M. (1996), "Cover cracking and amount of rebar corrosion: importance of the current applied accelerated tests", Proceedings of the International Conference on Concrete Repair, Rehabilitation and Protection, London, UK, June.
  7. Areias, P.M.A. and Belytschko, T. (2005), "Analysis of threedimensional crack initiation and propagation using the extended finite element method", Int. J. Numer. Meth. Eng., 63(5), 760-788. https://doi.org/10.1002/nme.1305
  8. Asadpour, A. and Mohammadi, S. (2007), "Developing new enrichment functions for crack simulation in orthotropic media by the extended finite element method", Int. J. Numer. Meth. Eng., 69(10), 2150-2172. https://doi.org/10.1002/nme.1839
  9. Bazant, Z.P. (1979), "Physical model for steel corrosion in sea structures-applications", J. Struct. Div., 105(6), 1155-1166.
  10. Bhargava, K., Ghosh, A.K., Mori, Y. and Ramanujam S. (2006), "Model for cover cracking due to rebar corrosion in RC structures", Eng. Struct., 28(8), 1093-1109. https://doi.org/10.1016/j.engstruct.2005.11.014
  11. Broomfield, J.P. (2007), Corrosion of Steel in Concrete: Understanding, Investigation and Repair, 2nd Edition, CRC Press, Taylor & Francis Group, London, UK.
  12. Cao, C., Cheung, M.M.S. and Chan, B.Y.B. (2013), "Modeling of interaction between corrosion-induced concrete cover crack and steel corrosion rate", Corros. Sci., 69, 97-109. https://doi.org/10.1016/j.corsci.2012.11.028
  13. Chen, D. and Mahadaven, S. (2008), "Chloride-induced reinforcement corrosion and concrete cracking simulation", Cement Concrete Res., 30(3), 227-238. https://doi.org/10.1016/j.cemconcomp.2006.10.007
  14. Chen, E. and Leung C.K.Y. (2015), "Finite element modeling of concrete cover cracking due to non-uniform steel corrosion", Eng. Fract. Mech., 134, 61-78. https://doi.org/10.1016/j.engfracmech.2014.12.011
  15. Clark, L.A. and Saifullah M. (1993), "Effect of corrosion on reinforcement bond strength", Proceedings of the 5th International Conference on Structural Faults and Repairs, Edinburgh, UK, June.
  16. Dagher, H.J. and Kulendran, S. (1992), "Finite element modeling of corrosion damage in concrete structures", ACI Struct. J., 89(6), 699-708.
  17. Du, Y.G., Chan, A.H.C. and Clark, L.A. (2006), "Finite element analysis of the effects of radial expansion of corroded reinforcement", Comput. Struct., 84(13-14), 917-929. https://doi.org/10.1016/j.compstruc.2006.02.012
  18. German, M. and Pamin, J. (2015), "FEM simulations of cracking in RC beams due to corrosion progress", Arch. Civ. Mech. Eng., 15(4), 1160-1172. http://dx.doi.org/10.1016/j.acme.2014.12.010.
  19. Jamali, A., Angst, U., Adey, B. and Elsener, B. (2013), "Modeling of corrosion-induced concrete cover cracking: A critical analysis", Constr. Build Mater., 42, 225-237. https://doi.org/10.1016/j.conbuildmat.2013.01.019
  20. Liu, Y. (1996), "Modeling the time to corrosion cracking of the cover concrete in chloride contaminated reinforced concrete structures", Ph.D. Dissertation, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA.
  21. Liu, Y. and Weyers, R.E. (1998), "Modeling the time-to-corrosion cracking in chloride contaminated reinforced concrete structures", ACI Mater. J., 95(6), 675-680.
  22. Lu, C., Jin, W. and Liu, R. (2011), "Reinforcement corrosioninduced cover cracking and its time prediction for reinforced concrete structures", Corros. Sci., 53(4), 1337-1347. https://doi.org/10.1016/j.corsci.2010.12.026
  23. Maaddawy, T.E. and Soudki, K. (2007), "A model for prediction of time from corrosion initiation to corrosion cracking", Cement Concrete Compos., 29(3), 168-175. https://doi.org/10.1016/j.cemconcomp.2006.11.004
  24. Martin-Perez, B. (1999), "Service life modelling of R.C. highway structures exposed to chlorides", Ph.D. Dissertation, Department of Civil Engineering, University of Toronto, Toronto, Canada.
  25. McLeish, A. (1986), "Cracking due to corrosion", Taywood Engineering, Technical Note No. 1632.
  26. Moes, N., Dolbow J. and Belytschko T. (1999) "A finite element method for crack growth without remeshing", Int. J. Numer. Meth. Eng., 46(1), 131-150. https://doi.org/10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J
  27. Morinaga, S. (1988), "Prediction of service life of reinforced concrete building based on rate of corrosion of reinforcing steel", Special Report of Institute of Technology, Shimizu Corporation, Tokyo, Japan.
  28. Oh, B.H., Kim, K.H. and Jang, B.S. (2009), "Critical corrosion amount to cause cracking of reinforced concrete structures", ACI Mater. J., 106(4), 333-339.
  29. Ozbolt, J., Balabanic, G. and Kuster, M. (2011), "3D Numerical modeling of steel corrosion in concrete structures", Corros. Sci., 53(12), 4166-4177. https://doi.org/10.1016/j.corsci.2011.08.026
  30. Pantazopoulou, S.J. and Papoulia, K.D. (2001), "Modeling covercracking due to reinforcement corrosion in RC structures", J. Eng. Mech., ASCE, 127(4), 342-351. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:4(342)
  31. Rodriguez, J., Ortega, L.M., Casal, J. and Diez, J.M. (1996), "Corrosion of reinforcement and service life of concrete structures", Proceedings of the 7th International Conference on Durability of Building Materials and Components, Stockholm, Sweden.
  32. Safehian, M. and Ramezanianpour, A.A. (2015), "Prediction of RC structure service life from field long term chloride diffusion", Comput. Concrete, 15(4), 589-606. https://doi.org/10.12989/cac.2015.15.4.589
  33. Song, Z., Jiang, L., Chu, H., Xiong, C., Liu, R. and You, L. (2014), "Modeling of chloride diffusion in concrete immersed in CaCl2 and NaCl solutions with account of multi-phase reactions and ionic interactions", Constr. Build Mater., 66, 1-9. https://doi.org/10.1016/j.conbuildmat.2014.05.026
  34. Suda, K., Misra, S. and Motohashi, K. (1993), "Corrosion products of reinforcing bars embedded in concrete", Corros. Sci., 35(5-8), 1543-1549. https://doi.org/10.1016/0010-938X(93)90382-Q
  35. Sukumar, N., Chop, D.L., Moes, N. and Belytschko, T. (2001), "Modeling holes and Inclusions by Level sets in Extended Finite Element Method", Comput. Method Appl. M., 190(46-47), 6183-6200. https://doi.org/10.1016/S0045-7825(01)00215-8
  36. Torres-Acosta, A.A. and Sagues, A.A. (2004), "Concrete cracking by localized steel corrosion-geometric effects", ACI Mater. J., 101(6), 501-507.
  37. Tsao, W.H., Huang, N.M. and Liang, M.T. (2015), "Modelling of chloride diffusion in saturated concrete", Comput. Concrete, 15(1), 127-140. https://doi.org/10.12989/cac.2015.15.1.127
  38. Williamson, S.J. and Clark, L.A. (2000), "Pressure required to cause cover cracking of concrete due to reinforcement corrosion", Mag. Concrete Res., 52(6), 455-467. https://doi.org/10.1680/macr.2000.52.6.455
  39. Yu, J. (2013) "Damage analysis and experimental study of reinforced concrete structures with rebar corrosion", Ph.D. Dissertation, Zhejiang University, Hangzhou, China.
  40. Zhao, Y., Dong, J., Wu, Y., Wang, H., Li, X. and Xu, Q. (2014), "Steel corrosion and corrosion-induced cracking in recycled aggregate concrete", Corros. Sci., 85, 241-250. https://doi.org/10.1016/j.corsci.2014.04.028
  41. Zhao, Y., Yu, J. and Jin, W. (2011), "Damage analysis and cracking model of reinforced concrete structures with rebar corrosion", Corros. Sci., 53(10), 3388-3397. https://doi.org/10.1016/j.corsci.2011.06.018
  42. Zhao, Y., Yu, J., Hu, B. and Jin, W. (2012), "Crack shape and rust distribution in corrosion-induced cracking concrete", Corros. Sci., 55, 385-393. https://doi.org/10.1016/j.corsci.2011.11.002

피인용 문헌

  1. Comparative post-yield performance evaluation of flexure member with corroded reinforcement vol.17, pp.1, 2017, https://doi.org/10.1080/15732479.2020.1731557