DOI QR코드

DOI QR Code

Photodegradation stability study of PVDF- and PEI-based membranes for oily wastewater treatment process

  • Ong, C.S. (Department of Environment Technology and Management, College of Life Sciences, Kuwait University) ;
  • Lau, W.J. (Advanced Membrane Technology Research Centre (AMTEC), Universiti Teknologi Malaysia) ;
  • Al-anzi, B. (Department of Environment Technology and Management, College of Life Sciences, Kuwait University) ;
  • Ismail, A.F. (Advanced Membrane Technology Research Centre (AMTEC), Universiti Teknologi Malaysia)
  • Received : 2016.05.05
  • Accepted : 2016.11.17
  • Published : 2017.05.25

Abstract

In this work, an attempt was made to compare the effects of UV irradiation on the intrinsic and separation properties of membranes made of two different polymeric materials, i.e., polyvinylidene fluoride (PVDF) and polyetherimide (PEI). The changes on membrane structural morphologies and chemical characteristics upon UV-A exposure (up to 60 h) were studied by FESEM and FTIR, respectively. It was found that cracks and fractures were detected on the PVDF-based membrane surface when the membrane was exposed directly to UV light for up to 60 h. Furthermore, the mechanical strength and thermal stability of irradiated PVDF-based membrane was reported to decrease with increasing UV exposure time. The PEI membrane surface meanwhile remained almost intact throughout the entire UV irradiation process. Filtration experiments showed that the permeate flux of UV-irradiated PVDF membrane was significantly increased from approximately 11 to $16L/m^2.h$ with increasing UV exposure time from zero to 60 h. Oil rejection meanwhile was decreased from 98 to 85%. For the PEI-based membrane, oil rejection of >97% was recorded and its overall structural integrity was marginally affected throughout the entire UV irradiation process. The findings of this work showed that the PEI-based membrane should be considered as the host for photocatalyts incorporation if the membrane was to be used for UV-assisted wastewater treatment process.

Keywords

References

  1. Alzahrani, S. and Mohammad, A.W. (2014), "Challenges and trends in membrane technology implementation for produced water treatment: A review", J. Water Proc. Eng., 4, 107-133. https://doi.org/10.1016/j.jwpe.2014.09.007
  2. Andrew, V.K. (2008), "Fracture and fatigue of ultrathin nanoporous polymer films", Degree of doctor, Philosophy Stanford university.
  3. Chong, M.N., Jin, B., Chow, C.W.K. and Saint, C. (2010), "Recent developments in photocatalytic water treatment technology: A review", Water Res., 44, 2997-3027. https://doi.org/10.1016/j.watres.2010.02.039
  4. Cui, H., Hanus, R. and Kessler, M.R. (2013), "Degradation of ROMP-based bio-renewable polymers by UV radiation", Polym. Degradat. Stab., 98, 2357-2365. https://doi.org/10.1016/j.polymdegradstab.2013.08.003
  5. Diya'uddeen, B.H., Daud, W.M.A.W. and Abdul Aziz, A.R. (2011), "Treatment technologies for petroleum refinery effluents: A review", Pr. Saf. Environ. Protect., 89, 95-105. https://doi.org/10.1016/j.psep.2010.11.003
  6. Fernandez, R.L., Mcdonald, J.A., Khan, S.J. and Le-Clech, P. (2014), "Removal of pharmaceuticals and endocrine disrupting chemicals by a submerged membrane photocatalysis reactor (MPR) ", Separat. Purif. Technol., 127, 131-139. https://doi.org/10.1016/j.seppur.2014.02.031
  7. Geretovszky, Z., Hopp, B., Bertoti, I. and Boyd, I.W. (2002), "Photodegradation of polycarbonate under narrow band irradiation at 172 nm", Appl. Surf. Sci., 186, 85-90. https://doi.org/10.1016/S0169-4332(01)00615-8
  8. Gesenhues, U. (2000), "Influence of titanium dioxide pigments on the photodegradation of poly(vinyl chloride) ", Polym. Degradat. Stab., 68, 185-196. https://doi.org/10.1016/S0141-3910(99)00184-6
  9. Ho, D.P., Vigneswaran, S. and Ngo, H.H. (2009), "Photocatalysis-membrane hybrid system for organic removal from biologically treated sewage effluent", Separat. Purif. Technol., 68, 145-152. https://doi.org/10.1016/j.seppur.2009.04.019
  10. Horikoshi, S., Hidaka, H. and Serpone, N. (2001), "Photocatalyzed degradation of polymers in aqueous semiconductor suspensions: V. Photomineralization of lactam ring-pendant polyvinylpyrrolidone at titania/water interfaces", J. Photochem. Photobio. A: Chem., 138, 69-77. https://doi.org/10.1016/S1010-6030(00)00388-9
  11. Hu, G., Li, J. and Zeng, G. (2013), "Recent development in the treatment of oily sludge from petroleum industry: A review", J. Hazard. Mater., 261, 470-490. https://doi.org/10.1016/j.jhazmat.2013.07.069
  12. Karhu, M., Kuokkanen, V., Kuokkanen, T. and Ramo, J. (2012), "Bench scale electrocoagulation studies of bio oil-in-water and synthetic oil-in-water emulsions", Separat. Purif. Technol., 96, 296-305. https://doi.org/10.1016/j.seppur.2012.06.003
  13. Kertesz, S., Cakl, J. and Jirankova, H. (2014), "Submerged hollow fiber microfiltration as a part of hybrid photocatalytic process for dye wastewater treatment", Desalinat., 343, 106-112. https://doi.org/10.1016/j.desal.2013.11.013
  14. Kim, M.J., Choo, K.H. and Park, H.S. (2010), "Photocatalytic degradation of seawater organic matter using a submerged membrane reactor", J. Photochem. Photobio. A: Chem., 216, 215-220. https://doi.org/10.1016/j.jphotochem.2010.08.011
  15. Kushwaha, O.S., Avadhani, C.V. and Singh, R.P. (2013), "Photo-oxidative degradation of polybenzimidazole derivative membrane", Adv. Mater. Lett., 4, 762-768. https://doi.org/10.5185/amlett.2013.3432
  16. Kushwaha, O.S., Avadhani, C.V. and Singh, R.P. (2014a), "Effect Of UV Rays On Degradation And Stability Of High Performance Polymer Membranes", Adv. Mater. Lett., 5, 272-279. https://doi.org/10.5185/amlett.2014.10533
  17. Kushwaha, O.S., Avadhani, C.V. and Singh, R.P. (2015), "Preparation and characterization of self-photostabilizing UV-durable bionanocomposite membranes for outdoor applications", Carbohyd. Polym., 123, 164-173. https://doi.org/10.1016/j.carbpol.2014.12.062
  18. Kushwaha, O.S., Avadhani, C.V., Tomer, N.S. and Singh, R.P. (2014b), "Accelerated degradation study of highly resistant polymer membranes for energy and environment applications", Adv. Chem. Sci., 3(2), 19-30.
  19. Li, Y.S., Yan, L., Xiang, C.B. and Hong, L.J. (2006), "Treatment of oily wastewater by organic-inorganic composite tubular ultrafiltration (UF) membranes", Desalinat., 196, 76-83. https://doi.org/10.1016/j.desal.2005.11.021
  20. Lonkar, S.P., Kushwaha, O.S., Leuteritz, A., Heinrich, G. and Singh, R.P. (2012), "Self photostabilizing UV-durable MWCNT/polymer nanocomposites", RSC Adv., 2, 12255-12262. https://doi.org/10.1039/c2ra21583g
  21. Molinari, R., Palmisano, L., Drioli, E. and Schiavello, M. (2002), "Studies on various reactor configurations for coupling photocatalysis and membrane processes in water purification", J. Membr. Sci., 206, 399-415. https://doi.org/10.1016/S0376-7388(01)00785-2
  22. Molinari, R., Palmisano, L., Loddo, V., Mozia, S. and Morawski, A.W. (2013), 21-Photocatalytic Membrane Reactors: Configurations, Performance and Applications in Water Treatment and Chemical Production, Ed. BASILE, A., Handbook of Membrane Reactors, Woodhead Publishing.
  23. Mozia, S., Morawski, A.W., Molinari, R., Palmisano, L. and Loddo, V. (2013), 6 - Photocatalytic Membrane Reactors: Fundamentals, Membrane Materials and Operational Issues, Ed. BASILE, A., Handbook of Membrane Reactors, Woodhead Publishing.
  24. Ong, C.S., Lau, W.J., Goh, P.S., Ng, B.C. and Ismail, A.F. (2014), "Investigation of submerged membrane photocatalytic reactor (sMPR) operating parameters during oily wastewater treatment process", Desalinat., 353, 48-56. https://doi.org/10.1016/j.desal.2014.09.008
  25. Painmanakul, P., Sastaravet, P., Lersjintanakarn, S. and Khaodhiar, S. (2010), "Effect of bubble hydrodynamic and chemical dosage on treatment of oily wastewater by Induced Air Flotation (IAF) process", Chem. Eng. Res. Des., 88, 693-702. https://doi.org/10.1016/j.cherd.2009.10.009
  26. Peng, G., Zhao, X., Zhan, Z., Ci, S., Wang, Q., Liang, Y. and Zhao, M. (2014), "New crystal structure and discharge efficiency of poly(vinylidene fluoride-hexafluoropropylene)/poly(methyl methacrylate) blend films", RSC Adv., 4, 16849-16854. https://doi.org/10.1039/C3RA47462C
  27. Ran, J., Liu, J., Zhang, C., Wang, D. and Li, X. (2013), "Experimental investigation and modeling of flotation column for treatment of oily wastewater", Int. J. Min. Sci. Tech., 23, 665-668. https://doi.org/10.1016/j.ijmst.2013.08.008
  28. Rupiasih, N., Suyanto, H., Sumadiyasa, M. and Wendri, N. (2013), "Study of effects of low doses UV radiation on microporous polysulfone membranes in sterilization process", Open J. Organic Polym. Mater., 3, 12-18. https://doi.org/10.4236/ojopm.2013.31003
  29. Sarasidis, V.C., Plakas, K.V., Patsios, S.I. and Karabelas, A.J. (2014), "Investigation of diclofenac degradation in a continuous photo-catalytic membrane reactor. Influence of operating parameters", Chem. Eng. J., 239, 299-311. https://doi.org/10.1016/j.cej.2013.11.026
  30. Socrates, G. (2002), Infrared and Raman Characteristic Group Frequencies: Tables and Charts, John Wiley and Sons.
  31. Torikai, A. and Hasegawa, H. (1998), "Wavelength effect on the accelerated photodegradation of polymethylmethacrylate", Polym. Degradat. Stab., 61, 361-364. https://doi.org/10.1016/S0141-3910(97)00119-5
  32. Zhenfeng, Z., Xingzhou, H. and Zubo, L. (1996), "Wavelength sensitivity of photooxidation of polypropylene", Polym. Degradat. Stab., 51, 93-97. https://doi.org/10.1016/0141-3910(95)00210-3
  33. Zhu, Y., Wang, D., Jiang, L. and Jin, J. (2014), "Recent progress in developing advanced membranes for emulsified oil/water separation", NPG Asia Mater., 6, e101. https://doi.org/10.1038/am.2014.23

Cited by

  1. Investigation of surface and filtration properties of TiO2 coated ultrafiltration polyacrylonitrile membranes vol.77, pp.4, 2018, https://doi.org/10.2166/wst.2017.610
  2. Stability of Polymeric Membranes to UV Exposure before and after Coating with TiO2 Nanoparticles vol.14, pp.1, 2022, https://doi.org/10.3390/polym14010124