DOI QR코드

DOI QR Code

Experimental and numerical research on ballistic performance of carbon steels and cold worked tool steels with and without Titanium Nitride (TiN) coating

  • Ergul, Erdi (Abant Izzet Baysal University, Department of Mechanical Engineering) ;
  • Doruk, Emre (TOFAS-FIAT, R&D Department) ;
  • Pakdil, Murat (Abant Izzet Baysal University, Department of Mechanical Engineering)
  • 투고 : 2016.05.12
  • 심사 : 2016.12.14
  • 발행 : 2017.02.10

초록

It is extremely important to be aware of the ballistic performances of engineering materials in order to be able to choose the lightest armor providing full ballistic protection in civil and military applications. Therefore, ballistic tests are an important part of armor design process. In this study, ballistic performance of plates made of carbon steel and cold worked tool steel against 7.62 mm AP (armor-piercing) bullets was examined experimentally and numerically in accordance with NIJ standards. Samples in different sizes were prepared to demonstrate the effect of target thickness on ballistic performance. Some of these samples were coated with titanium nitride using physical vapor deposition (PVD) method. After examining all successful and unsuccessful samples at macro and micro levels, factors affecting ballistic performance were determined. Explicit non-linear analyses were made using Ls-Dyna software in order to confirm physical ballistic test results. It was observed that the ballistic features of steel plates used in simulations comply with actual physical test results.

키워드

참고문헌

  1. Atapek, S.H. (2012), "Development and characterization of ballistic steels according to physical metallurgical principles", M.Sc. Dissertation; Kocaeli University, Kocaeli, Turkey.
  2. Balakrishnan, M., Balasubramanian, V. and Madhusudhan Reddy, G. (2013), "Effect of hardfacing consumables on ballistic performance of Q&T steel joints", Defence Technol., 9(4), 249- 258. https://doi.org/10.1016/j.dt.2013.12.007
  3. Findik, F. and Tarim, N. (2003), "Ballistic impact efficiency of polymer composites", Compos. Struct., 61(3), 187-192. https://doi.org/10.1016/S0263-8223(03)00065-5
  4. Ford, R. (2006), Weapon: A Visual History of Arms and Armour, DK Publishing, London, UK.
  5. GAlvez, F., Cendón, D., García, N., Enfedaque, A. and SAnchez- GAlvez, V. (2009), "Dynamic Fracture Toughness of a High Strength Armor Steel", Eng. Fail. Anal., 16(8), 2567-2575. https://doi.org/10.1016/j.engfailanal.2009.04.020
  6. Gillespie, J.W. (2001), "Aluminum Foam Integral Armor: A New Dimension in Armor Design", Compos. Struct., 52(3-4), 381- 395. https://doi.org/10.1016/S0263-8223(01)00029-0
  7. Iqbal, M.A., Senthil, K., Bhargava, P. and Gupta, N.K. (2015), "The characterization and ballistic evaluation of mild steel", Int. J. Impact Eng., 78(4), 98-113. https://doi.org/10.1016/j.ijimpeng.2014.12.006
  8. Jena, P.K., Mishra, B., Kumar, K.S. and Bhat, T.B. (2010), "An experimental study on the ballistic impact behavior of some metallic armour materials against 7.62 mm deformable projectile", Mater. Des., 31(7), 3308-3316. https://doi.org/10.1016/j.matdes.2010.02.005
  9. Karagoz, S., Atapek, H. and Yilmaz, A. (2007), "Development of a quenched and tempered steel as a ballistic material with alloying and heat treatment", Proceedings of IV. Iron&Steel Semposium, KarabUk, Turkey, November.
  10. Kilic, N., Ekici, B. and Hartomacioglu, S. (2015), "Determination of penetration depth at high velocity impact using finite element method and artificial neural network tools", Defence Technol., 11(2), 110-122. https://doi.org/10.1016/j.dt.2014.12.001
  11. Kpenyigba, K.M., Jankowiak, T., Rusinek, A., Pesci, R. and Wang, B. (2015), "Effect of projectile nose shape on ballistic resistance of interstitial-free steel sheets", Int. J. Impact Eng., 79(5), 83- 94. https://doi.org/10.1016/j.ijimpeng.2014.10.007
  12. Lane, R., Craig, B. and Babcock, W. (2002), "Materials for Blast and Penetration Resistance", The AMPTIAC Quartely, 6(4), 39- 45.
  13. Li, R., Fan, Q., Gao, R., Huo, L., Wang, F. and Wang, Y. (2014), "Effects of dynamic mechanical properties on the ballistic performance of a new near-b titanium alloy Ti684", Mater. Des., 62(5), 233-240. https://doi.org/10.1016/j.matdes.2014.05.044
  14. Naik, N.K. and Shrirao, P. (2004), "Composite Structures Under Ballistic Impact", Compos. Struct., 66(1-4), 579-590. https://doi.org/10.1016/j.compstruct.2004.05.006
  15. Ponguru Senthil, P., Bhav Singh, B., Siva Kumar, K. and Gogia, A.K. (2015), "Effect of heat treatment on ballistic performance of an armour steel against long rod projectile", Int. J. Impact Eng., 80(6), 13-23. https://doi.org/10.1016/j.ijimpeng.2014.12.003
  16. Ramavat, S., Thorat, D. and Prashant, C. (2012), "Simulation of bullet impact on bullet resistant steel plate", Simulation Driven Innovation, HTC 2012, USA.
  17. Rakvag, K.G., Borvik, T., Westermann, I. and Hopperstad, O.S. (2013), "An experimental study on the deformation and fracture modes of steel projectiles during impact", Mater. Des., 51(10), 242-256. https://doi.org/10.1016/j.matdes.2013.04.036
  18. Russell, B.P. (2014), "Multi-hit ballistic damage characterisation of 304 stainless steel plates with finite elements", Mater. Des., 58(6), 252-264. https://doi.org/10.1016/j.matdes.2014.01.074
  19. Sangoy, L., Meunier, Y. and Pont, G. (1988), "Steels for Ballistic Protection", Israel J. Technol., 24, 319-326.
  20. Shokrieh, M.M. and Javadpour, G.H. (2008), "Penetration analysis of a projectile in ceramic composite armor", Compos. Struct., 82(2), 269-276. https://doi.org/10.1016/j.compstruct.2007.01.023
  21. Sukumar, G., Singh, B.B., Bhattacharjee, A., Sivakumar, K. and Gogia, A.K. (2015), "Effect of heat treatment on mechanical properties and ballistic performance of Ti-4Al-2.3V-1.9Fe alloy", Materials Today: Proceedings, 2(4-5), 1102-1108. https://doi.org/10.1016/j.matpr.2015.07.015
  22. Tarim N., Findik, F. and Uzun, H. (2002), "Ballistic impact performance of composite structures", Compos. Struct., 56(1), 13-20. https://doi.org/10.1016/S0263-8223(01)00177-5
  23. Ubeyli, M., Demir, T., Deniz, H., Yildirim, O. and Keles, O. (2010), "Investigation on the ballistic performance of a dual phase steel against 7.62 mm AP projectile", Mat. Sci. Eng. A, 527(7-8), 2036-2044. https://doi.org/10.1016/j.msea.2009.11.040
  24. URL (2016), www.thehighroad.org (Last accessed date: November 2016).
  25. Wang, Y.L., Hui, S., Liu, R. and Ye, W. (2015), "Evaluation of dynamic performance and ballistic behavior of −T5i Al−5Mo− 5V−3Cr−1Zr alloy", Trans. Nonferrous Met. Soc. China, 25, 429-436. https://doi.org/10.1016/S1003-6326(15)63620-2
  26. Wang, Y., Chen, X., Young, R. and Kinloch, I. (2016), "A numerical and experimental analysis of the influence of crimp on ballistic impact response of woven fabrics", Compos. Struct., 140(4), 44-52. https://doi.org/10.1016/j.compstruct.2015.12.055

피인용 문헌

  1. Investigation of the structural, magnetic and electrical properties of the Au doped YBCO superconductors vol.30, pp.3, 2017, https://doi.org/10.1007/s10854-018-0497-8