Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지
DOI QR코드

DOI QR Code

The Development of Seat Track Parts Using Shape Freeze in UHSS

초고강도 소재 성형시 형상 동결을 이용한 Seat Track 부품 개발

  • Received : 2016.08.23
  • Accepted : 2016.12.06
  • Published : 2017.02.15
Download PDF
⟨ Previous Next ⟩

Abstract

A seat track product is a car seat part that provides a base for vehicle seats. An ultra-high strength steel sheet is used to reduce the weight of vehicle body parts. However, the formability of an ultra-high strength steel sheet is poor because of its very low elongation and very high elastic deformation. For this reason, a new forming technology of an ultra-high strength steel sheet is required. The influence of spring-back of seat track parts on the shape freeze in forming processes was investigated to be solved by adjusting the appropriate tool design such as minus clearance between punch and die, and punch angle. This paper describes how to apply the spring-back prevention technique for improving shape freeze by using the ultra-high strength steel sheet with 980MPa to develop lightweight seat tract parts.

Keywords

References

  1. Akbar., Basha. S., Surendra., P., Manu, Ravuri., Guru, Mahesh. G., 2013, Analysis and Optimization of Automobile Seat Track, International Journal of Scientific & Engineering Research, 4:11 783-786.
  2. Choi, W. H, 2007, Development of Auto-Body Design Technology and Welding Jig for Laser Remote Welding Application, KSAE07-G0009, 62-67.
  3. Hideyuki, 2003, Springback Simulation of Automotive Body Panel in Multi-Operation Stamping Process Using Static-explicit FEM Code, JSAE Annual Congress, 13 13-16.
  4. Kim, K. T., 2014, Application of Springback Analysis in the Development of a Reinforce Center Pillar Stamping Die, Journal of the Korea Society for Technology of Plastics, 23:5 297-302.
  5. Moon, M. S., 2003, Improvement of Springback Predictability for Industrial Requirement, 4th Sheet Metal Forming Symposium, 58-66.
  6. Choi, M . K., 2012, Investigation of Springback Behavior of DP780 Steel Sheets after the U-bending Process, Transactions of Materials Processing, 21:6 384-388. https://doi.org/10.5228/KSTP.2012.21.6.384
  7. Hong, S. M., 2014, Bead Optimization to Reduce Springback of Sheet Metal Forming using High Strength Steel, Journal of the Korean Society of Manufacturing Technology Engineers, 23:3 350-354. https://doi.org/10.7735/ksmte.2014.23.4.350
  8. Kumar, S. D., 2016, Forming Limit Diagram Generation of Aluminum Alloy AA2014 Using Nakazima Test Simulation Tool, Procedia Technology, 24 386-393. https://doi.org/10.1016/j.protcy.2016.05.053
  9. Kim, H. Y., Choi, S. C., Lee, H. S., Kim, H. J., Lee, K. T., 2007, Experiments for Forming Limit Diagram and Springback Characteristics of AZ31B Magnesium Alloy Sheet at Elevated Temperature, Transactions of Materials Processing, 16:5 364-369. https://doi.org/10.5228/KSPP.2007.16.5.364
  10. Kim, S. H., 2012, Illustration Data Book for Die Design , Dae Kwang Seo Rim, 3-12.
  11. Suh, C. H., 2012, The Effects of Process Parameters of Multi-Stage Forming on Springback for a U-channel Made of Ultra-high Strength Steel, Transactions of the Korean Society of Mechanical Engineers, 36:3 283-288. https://doi.org/10.3795/KSME-A.2012.36.3.283

Cited by

  1. Process Design of Automobile Seat Rail Lower Parts using Ultra-High Strength, DP980 Steel vol.17, pp.2, 2018, https://doi.org/10.14775/ksmpe.2018.17.2.160