Abstract
The main objective of a torque controller below rated wind speed is to extract maximum power from the potential wind energy. To do this, the torque control method, which adjusts the torque magnitude and makes it proportional to the square of the generator speed, has been applied. However, this method makes the response slower as the wind turbines are getting larger in size with multi-MW capacities. In this paper, a torque control method that uses the nonlinear parameter of rotor speed for aerodynamic torque as a control gain is discussed to improve the response by adjusting an additional torque magnitude. The nonlinear parameter of the rotor speed could be calculated both online and offline. It is shown that the offline case is more practical and effective in producing power through the numerical simulation of a 2MW wind turbine by considering the real turbulence wind speed.
정격풍속 이하에서 풍력발전기의 토크 제어기는 최대 출력 파워를 얻기 위하여 중요하다. 토크 제어의 주된 목적은 바람이 가진 에너지로부터 최대의 출력 파워를 얻도록 하는 것이다. 이를 위하여 최적모드게인을 이용하여 발전기 속도의 제곱에 비례하도록 발전기의 토크 크기를 조절하는 방법이 많이 적용되었다. 그러나 이 제어 방법은 풍력발전기가 수 MW급으로 대형화될수록 응답이 느려진다. 본 논문에서는 토크 제어기의 응답을 빠르게 하기 위하여 공력 토크의 로터 속도 비선형 파라미터를 제어 게인으로 이용하여 추가적인 토크 크기를 조절하는 방법을 고려하였다. 로터 속도 비선형 파라미터의 계산 시에 온라인 경우와 오프라인 경우를 각각 살펴보았다. 2MW 풍력발전기에 대하여 실제 난류 풍속에 대하여 수치실험을 수행하여 오프라인 경우가 출력 파워를 더 향상시키고 실용적임을 보인다.