Design & Manufacturing

  • 제11권2호
  • /
  • Pages.42-45
  • /
  • 2017
  • /
  • 2800-0323(pISSN)
  • /
  • 2733-452X(eISSN)
한국금형공학회 (Korean Society of Die & Mold Engineering)
권호 표지

MR Fluid Polishing을 이용한 커버글래스 측면 연마 조건 최적화에 관한 기초 연구

A Study on the Optimization of MR Fluid Polishing Conditions for Cover Glass Edge

  • 투고 : 2017.06.28
  • 심사 : 2017.08.01
  • 발행 : 2017.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Currently, the mobile device is required to be miniaturized and lightweight according to the needs of the consumer. For this purpose, each part is produced and assembled in units of modules. Accordingly, the display part is also composed of a cover glass, a touch screen, And it costs a large amount to replace the whole when it is damaged. Therefore, we propose a method to improve the durability of display part using ANOVA (Analysis of Variance) and MR fluid polishing. Before MR fluid polishing process, surface treatment was performed to obtain a polishable surface. A series of experiments were carried out to very fine surface roughness and to secure durability of cover glass. Polishing depth, feed rate, and abrasive size were selected to examine the MR fluid polishing results.

키워드

참고문헌

  1. Allaire R. A., J. C. Lapp, "Scoring of AMLCD Glass." Corning Incorporated, Technical Information Paper, 2001.
  2. Ono Toshihiko, Koichi Tanaka, "Cuttability of AMLCD Glass Substrates using a Four-Point-Bending Test".
  3. Neauport, J., C. Ambard, H. Bercegol, O. Cahuc, J. P. Champreux, J. L. Charles, P. Cormont, N. Darbois, P. Darnis, and J. Destibats. "Optimizing Fused Silica Polishing Processed for 351nm High-Power Laser Application." 71321I-71321I-7.
  4. Neauport J., et al, "Subsurface Damage Measurement of Ground Fused Silica Parts by HF Etching Techniqued." Optics Express, Vol. 17, No. 22, pp. 20448-20456, 2009. https://doi.org/10.1364/OE.17.020448
  5. T. Suratwala, L. Wong, P. Miler, M. D. Feit, J. Menapace, R. Steele, P. Davis et al., "Sub-surface mechanical damage distrivutions during grinding of fused silica" J. Non-Crystal. Solids 352, 5601-5617 2006. https://doi.org/10.1016/j.jnoncrysol.2006.09.012
  6. U. Lange, L. Richter, and L. Zipser, "Flow of Magnetorheological Fluids", J. Intel. Mater. Sys. and Struct., Vol. 12, pp. 161-164, 2001. https://doi.org/10.1106/PF05-DTU2-2QTD-28B6
  7. G. Taguchi, "System of Experimental Design: Engineering Methods to Optimize Quality and Minimize Costs (3rd Edn)", Vols 1 and 2 American Supplier institute, Dearborn, MI (1987)
  8. 박성현 외 1 명, "Minitab을 활용한 현대실험계획법", 민영사, 2011.