DOI QR코드

DOI QR Code

암모니아 입하 및 저장시설에서의 위험도 관리

Risk Management for Ammonia Unloading and Storage Tank Facility

  • 정윤서 (인천대학교 안전공학과) ;
  • 우인성 (인천대학교 안전공학과) ;
  • 임종우 (인천대학교 안전공학과)
  • Jeong, Yun Seo (Department of Safety Engineering, Incheon National University) ;
  • Woo, In Sung (Department of Safety Engineering, Incheon National University) ;
  • Lim, Jong Woo (Department of Safety Engineering, Incheon National University)
  • 투고 : 2017.07.26
  • 심사 : 2017.10.25
  • 발행 : 2017.10.30

초록

제조산업 현장에서는 수많은 유해위험물질이 사용, 처리 및 생산되고 있으며, 암모니아를 취급하는 시설에서 많은 누출, 화재 폭발사고가 보고되고 있다. 유해위험시설에서의 위험관리 및 사고예방을 위하여 공정안전관리(PSM), 가스안전관리(SMS), 장외영향평가(ORA) 제도 등 다양한 안전환경관리 프로그램이 국내 산업현장에 적용되고 있고 학계에서도 위험성평가 관련 연구가 활발하게 진행되고 있다. 본 연구에서는 암모니아 입하 및 저장 시설을 대상으로 정량적 위험성평가가 수행되었는데 사고 시나리오에 대한 피해영향범위 산정에는 장외영향평가용 KORA 프로그램, 사고 빈도 분석에는 LOPA PFD 활용 방식을 적용하였다. 평가 결과 추정된 위험도를 완화하고 지속적인 위험을 관리하는 방안으로 누출 감지 및 비상 차단, 물 분무 및 증기 희석 설비, 방류벽 및 트렌치, 누출 비산 방호 등 공정 안전설계 하드웨어 개선부분과 위험관리기준 효과적 적용, LOPA 보완적용, 보조 피해영향범위 산정 프로그램 활용, 위험도기반 공정안전관리제도 적용, 공정위험성 재평가 및 이행성 관리 등 프로그램 및 제도 운용 측면에서의 방안이 제시되었다.

A lot of hazardous materials have been used for product processing and utility plant. Many accidents including toxic release, fire and explosions occur in the ammonia related facility and plant. Various safety and environment management program including PSM, SMS, ORA etc. are being implemented for risk management and accident prevention in the production industry. Also much study and research have been carried about risk assessment of accident scenario in the academic and research area. In this paper, firstly risk level was assessed by using a typically used KORA program and LOPA PFD method for the selected ammonia unloading and storage facility. And then risk reduction measures for the risk assessed facility were studied in 3 aspects and some measures were proposed. Those Risk Reduction measures are including a leak detection and emergency isolation, water spray, dilution tank, dike and trench, scattering protection in hardware impovement aspect, and a applicable risk criteria, conditional modifier for existing LOPA PFD, alternative supporting modeling program in risk estimation methodology aspect, and last RBPS(Risk Based Process Safety) program, re-doing of process hazard analysis, management system compliance audit in managerial activity aspect.

키워드

참고문헌

  1. Park S W, Jung S H, "Recommended Evacuation Distance for Offsite Risk Assessment of Ammonia Release Scenarios", Journal of the Korean Society of Safety, 31(3), 156-161, (2016) https://doi.org/10.14346/JKOSOS.2016.31.3.156
  2. Pae M S, "Consequence Analysis and Safety Measures on Ammonia Release from Tank Container", Chungbuk National University Master Degree Thesis. 5-6, (2016)
  3. NCIS CSC System 'Accident Information' (2017) (http://csc.me.go.kr)
  4. Kim J H, Jung S H, "Off-site Consequence Modeling for Evacuation Distances against Accidental Hydrogen Fluoride(HF) Release Scenarios", Korean Chemical Engineering Research, 54(4), 582-585, (2016) https://doi.org/10.9713/kcer.2016.54.4.582
  5. Lee D H, Park K S, Kim T O, Shin D M, Shin S Y, 'Offsite Risk Assessment on Flammable Hazard Site', Korean Journal of Hazardous Materials, 3(1), 52-58, (2015)
  6. KS C IEC 60079-10-1 : Explosive atmospheres - Part 10-1 Classification of areas - Explosive gas atmospheres. (2012)
  7. KOSHA Guide P-92-2012, Technical Guidelines for Release Source Modeling. (2012)
  8. API RP 581 : Risk Based Inspection Base Resource Document. (2000)
  9. CCPS of AIChE, "Guidelines for Developing Quantitative Safety Risk Criteria", Wiley, (2009)
  10. CCPS of AIChE, "Layer of Protection Analysis - Simplified Process Risk Assessment", (2001)
  11. CCPS of AIChE, "Guidelines for Enabling Conditions and Conditional Modifier in LOPA" , Wiley, (2014)
  12. CCPS of AIChE, "Guidelines for Risk Based Process Safety", Wiley, (2007)