DOI QR코드

DOI QR Code

Nonlinear static and dynamic behavior of reinforced concrete steel-braced frames

  • Eskandari, Reyhaneh (Department of Civil Engineering, Chabahar Maritime University) ;
  • Vafaei, Davoud (Department of Civil Engineering, Chabahar Maritime University) ;
  • Vafaei, Javid (Department of Civil and Environmental Engineering, Amirkabir University of Technology) ;
  • Shemshadian, Mohammad Ebrahim (Department of Civil, Environmental, and Geo-Engineering, University of Minnesota (Twin Cities))
  • 투고 : 2015.10.15
  • 심사 : 2017.01.18
  • 발행 : 2017.02.25

초록

In this paper, the seismic performance of reinforced concrete braced frames (RC-BF) under far- and near-fault motions was investigated. Four-, eight-, 12- and 16-story RC-BFs were designed on the basis of a code-design method for a high risk seismic zone. Nonlinear static and dynamic analyses of the frames have been performed using OpenSees software. To consider diverse characteristics of near-fault motions, records with forward-directivity and fling-step effects were employed. From the results obtained in the analytical study it is concluded that the used design method was reasonable and the mean maximum drift of the frames under all ground motion sets were in acceptable range. For intermediate- and high-rise buildings the near-fault motions imposed higher demands than far-faults.

키워드

과제정보

연구 과제 주관 기관 : Sistan and Baluchestan Construction Engineering Organization (S&B-CEO)

참고문헌

  1. Abou-Elfath, H. and Ghobarah, A. (2000), "Behaviour of reinforced concrete frames rehabilitated with concentric steel bracing", Can. J. Civ. Eng., 27(3), 433-444. https://doi.org/10.1139/l99-092
  2. AISC (2005), Specification for Structural Steel Buildings.
  3. Akbari, R. and Maheri, M.R. (2011), "Analytical investigation of response modification (behaviour) factor, R, for reinforced concrete frames rehabilitated by steel chevron bracing", Struct. Infrastruct. Eng., 9(6), 507-515. https://doi.org/10.1080/15732479.2011.575166
  4. Asgarian, B., Aghakouchack, A.A. and Bea, R.G. (2005), "Inelastic postbuckling and cyclic behavior of tubular braces", J. Offshore Mech. Arctic Eng., 127(3), 256-262. https://doi.org/10.1115/1.1904637
  5. Badoux, M. and Jirsa, J.O. (1990), "Steel bracing of RC frames for seismic retrofitting", J. Struct. Eng., 116(1), 55-74. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(55)
  6. Beiraghi, H., Kheyroddin, A. and Kafi, M.A. (2015), "Nonlinear fiber element analysis of a reinforced concrete shear wall subjected to earthquake records", Iran. J. Sci. Technol. Trans. Civ. Eng., 39(C2+), 409-422.
  7. Beko, A., Rosko, P., Wenzel, H., Pegon, P., Markovic, D. and Molina, F.J. (2015), "RC shear walls: Full-scale cyclic test, insights and derived analytical model", Eng. Struct., 102, 120-131. https://doi.org/10.1016/j.engstruct.2015.07.053
  8. Black, G.R., Wenger, B.A. and Popov, E.P. (1980), "Inelastic buckling of steel struts under cyclic load reversals", UCB/EERC-80/40, Earthquake Engineering Research Center, Berkeley, California.
  9. Bush, T., Jones, E. and Jirsa, J. (1991), "Behavior of RC frame strengthened using structural steel bracing", J. Struct. Eng., 117(4), 1115-1126. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:4(1115)
  10. Crisfield, M.A. (1991), Non-linear Finite Element Analysis of Solids and Structures, John Wiley & Sons, Inc., New York.
  11. Del Valle, E. (1980), "Some lessons from the March 14, 1979 earthquake in Mexico City", 7th world conference on earthquake engineering, Istanbul, Turkey.
  12. Del Valle, E., Foutch, D.A., Hjelmstad, K.D., Figueroa-Gutierrez, E. and Tena-Colunga, A. (1988), "Seismic retrofit of a RC building: a case study", 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan.
  13. El-Amoury, T. and Ghobarah, A. (2005), "Retrofit of RC frames using FRP jacketing or steel bracing", J. Seismol. Earthq. Eng., 7(2), 83-94.
  14. Eskandari, R. and Vafaei, D. (2015), "Effects of near-fault records characteristics on seismic performance of eccentrically braced frames", Struct. Eng. Mech., 56(5), 855-870. https://doi.org/10.12989/sem.2015.56.5.855
  15. Farahi, M. and Mofid, M. (2013), "On the quantification of seismic performance factors of Chevron Knee Bracings, in steel structures", Eng. Struct., 46, 155-164. https://doi.org/10.1016/j.engstruct.2012.06.026
  16. Fardis, M.N. and Biskinis, D.E. (2003), "Deformation capacity of RC members, as controlled by flexure or shear", Otani Symposium, 511-530.
  17. Foutch, D.A., Hjelmstad, K.D., Calderon, E.D.V., Gutierrez, E.F. and Downs, R.E. (1989), "The Mexico Earthquake of September 19, 1985-Case studies of seismic strengthening for two buildings in Mexico City", Earthq. Spectra, 5(1), 153-174. https://doi.org/10.1193/1.1585517
  18. Ghaffarzadeh, H. and Maheri, M.R. (2006), "Cyclic tests on the internally braced RC frames", J. Seismol. Earthq. Eng., 8(3), 177-186.
  19. Gill, W.D., Park, R. and Priestley, M.J.N. (1979), "Ductility of rectangular reinforced concrete columns with axial load", Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
  20. Godinez-Dominguez, E.A. and Tena-Colunga, A. (2010), "Nonlinear behavior of code-designed reinforced concrete concentric braced frames under lateral loading", Eng. Struct., 32(4), 944-963. https://doi.org/10.1016/j.engstruct.2009.12.020
  21. Godinez-Dominguez, E.A., Tena-Colunga, A. and Perez-Rocha, L.E. (2012), "Case studies on the seismic behavior of reinforced concrete chevron braced framed buildings", Eng. Struct., 45, 78-103. https://doi.org/10.1016/j.engstruct.2012.05.005
  22. Haselton, C.B., Goulet, C.A., Mitrani-Reiser, J., Beck, J.L., Deierlein, G.G., Porter, K.A., Stewart, J.P. and Taciroglu, E. (2007), "An assessment to benchmark the seismic performance of a code-conforming reinforced concrete moment-frame building", Pacific Earthquake Engineering Research Center.
  23. Huang, L., Tan, H. and Yan, L. (2014), "Seismic behavior of chevron braced reinforced concrete spatial frame", Mater. Struct., 48(12), 4005-4018. https://doi.org/10.1617/s11527-014-0459-4
  24. Ju, M., Lee, K.S., Sim, J. and Kwon, H. (2014), "Noncompression X-bracing system using CF anchors for seismic strengthening of RC structures. Magazine of Concrete Research", 66(4), 159-174. https://doi.org/10.1680/macr.13.00165
  25. Junemann, R., de la Llera, J.C., Hube, M.A., Vasquez, J.A. and Chacon, M.F. (2016), "Study of the damage of reinforced concrete shear walls during the 2010 Chile earthquake", Earthq. Eng. Struct. D., 45(10), 1621-1641. https://doi.org/10.1002/eqe.2750
  26. Kalkan, E. and Kunnath, S.K. (2006), "Effects of fling step and forward directivity on seismic response of buildings", Earthq. Spectra, 22(2), 367-390. https://doi.org/10.1193/1.2192560
  27. Kalkan, E. and Kunnath, S.K. (2007), "Assessment of current nonlinear static procedures for seismic evaluation of buildings", Eng. Struct., 29(3), 305-316. https://doi.org/10.1016/j.engstruct.2006.04.012
  28. Kono, S. and Watanabe, F. (2002), "Damage evaluation of reinforced concrete columns under multiaxial cyclic loadings", The Second U.S.-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinfoced Concrete Building Structures.
  29. Li, G., Zhang, F., Zhang, Y. and Li, H.-N. (2015), "Nonlinear hysteretic behavior simulation of reinforced concrete shear walls using the force analogy method", Struct. Des. Tall Spec. Build., 24(7), 504-520. https://doi.org/10.1002/tal.1177
  30. Maheri, M.R. and Akbari, R. (2003), "Seismic behaviour factor, R, for steel X-braced and knee-braced RC buildings", Eng. Struct., 25(12), 1505-1513. https://doi.org/10.1016/S0141-0296(03)00117-2
  31. Maheri, M.R. and Ghaffarzadeh, H. (2008), "Connection overstrength in steel-braced RC frames", Eng. Struct., 30(7), 1938-1948. https://doi.org/10.1016/j.engstruct.2007.12.016
  32. Maheri, M.R. and Sahebi, A. (1997), "Use of steel bracing in reinforced concrete frames", Eng. Struct., 19(12), 1018-1024. https://doi.org/10.1016/S0141-0296(97)00041-2
  33. Malekpour, S., Ghaffarzadeh, H. and Dashti, F. (2013), "Direct displacement-based design of steel-braced reinforced concrete frames", Struct. Des. Tall Spec. Build., 22(18), 1422-1438. https://doi.org/10.1002/tal.1028
  34. Mander, J., Priestley, M. and Park, R. (1988), "Theoretical stressstrain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  35. Massumi, A. and Absalan, M. (2013), "Interaction between bracing system and moment resisting frame in braced RC frames", Archiv. Civ. Mech. Eng., 13(2), 260-268. https://doi.org/10.1016/j.acme.2013.01.004
  36. Mazzoni, S., McKenna, F., Scott, M. and Fenves, G. (2007), "OpenSees command language manual", Pacific Earthquake Engineering Research (PEER) Center.
  37. Mostofinejad, D. and Mohammadi Anaei, M. (2012), "Effect of confining of boundary elements of slender RC shear wall by FRP composites and stirrups", Eng. Struct., 41, 1-13. https://doi.org/10.1016/j.engstruct.2012.03.019
  38. Panagiotakos, T.B. and Fardis, M.N. (2001), "Deformation of reinforced concrete members at yielding and ultimate", Struct. J., 98(2), 135-148.
  39. Saad, G., Najjar, S. and Saddik, F. (2016), "Seismic performance of reinforced concrete shear wall buildings with underground stories", Earthq. Struct., 10(4), 965-988. https://doi.org/10.12989/eas.2016.10.4.965
  40. Tena-Colunga, A., Valle, E.D. and Perez-Moreno, D. (1996), "Issues on the seismic retrofit of a building near resonant response and structural pounding", Earthq. Spectra, 12(3), 567-597. https://doi.org/10.1193/1.1585897
  41. Code, U.B. (1997), "Uniform building code", In International conference of building officials, USA.
  42. Uriz, P., Filippou, F. and Mahin, S. (2008), "Model for cyclic inelastic buckling of steel braces", J. Struct. Eng., 134(4), 619-628. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:4(619)
  43. Uriz, P. and Mahin, S.A. (2008), "Toward earthquake-resistant design of concentrically braced steel-frame structures", Pacific Earthquake Engineering Research Center.
  44. Vafaei, D. and Eskandari, R. (2015), "Seismic response of mega buckling-restrained braces subjected to fling-step and forwarddirectivity near-fault ground motions", Struct. Des. Tall Spec. Build., 24(9), 672-686. https://doi.org/10.1002/tal.1205
  45. Vafaei, D. and Eskandari, R. (2016), "Seismic performance of steel mega braced frames equipped with shape-memory alloy braces under near-fault earthquakes", Struct. Des. Tall Spec. Build., 25(1), 3-21. https://doi.org/10.1002/tal.1225
  46. Viswanath, K.G., Prakash, K.B. and Desai, A. (2010), "Seismic analysis of steel braced reinforced concrete frames", Int. J. Civ. Struct. Eng., 1(1), 114-122.
  47. Wang, H., Li, G. and Huang, X. (2016), "Behavior of coupled shear walls with buckling-restrained steel plates in high-rise buildings under lateral actions", Struct. Des. Tall Spec. Build., 25(1), 22-44. https://doi.org/10.1002/tal.1226
  48. Youssef, M.A., Ghaffarzadeh, H. and Nehdi, M. (2007), "Seismic performance of RC frames with concentric internal steel bracing", Eng. Struct., 29(7), 1561-1568. https://doi.org/10.1016/j.engstruct.2006.08.027
  49. Zhao, Q. and Astaneh-Asl, A. (2004), "Cyclic behavior of an innovative steel plate shear wall system", 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada.

피인용 문헌

  1. Progressive Collapse Analysis of SRC Frame-RC Core Tube Hybrid Structure vol.8, pp.11, 2018, https://doi.org/10.3390/app8112316
  2. Earthquake effects on the energy demand of tall reinforced concrete walls with buckling-restrained brace outriggers vol.63, pp.4, 2017, https://doi.org/10.12989/sem.2017.63.4.521
  3. Behavior of ductile steel X-braced RC frames in seismic zones vol.18, pp.4, 2017, https://doi.org/10.1007/s11803-019-0539-0
  4. Seismic response of dual structures comprised by Buckling-Restrained Braces (BRB) and RC walls vol.72, pp.4, 2017, https://doi.org/10.12989/sem.2019.72.4.443
  5. An Optimal Approach of Adaptive Neuro -Fuzzy Inference System to Predict the Roof Ductility Demand of EBFs Subjected to Near-Fault Pulse-Like Ground Motions vol.5, pp.6, 2017, https://doi.org/10.33889/ijmems.2020.5.6.112
  6. Mechanical property test and analysis on the main body frame structure of electrical dust precipitator vol.26, pp.2, 2017, https://doi.org/10.1590/s1517-707620210002.1290
  7. Optimum location of second outrigger in RC core walls subjected to NF earthquakes vol.38, pp.6, 2017, https://doi.org/10.12989/scs.2021.38.6.671