DOI QR코드

DOI QR Code

N-type 고효율 태양전지용 Boron Diffused Layer의 형성 방법 및 특성 분석

Boron Diffused Layer Formation Process and Characteristics for High Efficiency N-type Crystalline Silicon Solar Cell Applications

  • 심경배 (성균관대학교 정보통신대학) ;
  • 박철민 (성균관대학교 에너지과학과) ;
  • 이준신 (성균관대학교 정보통신대학)
  • Shim, Gyeongbae (College of Information and Communication Engineering, Sungkyunkwan University) ;
  • Park, Cheolmin (Department of Energy Science, Sungkyunkwan University) ;
  • Yi, Junsin (College of Information and Communication Engineering, Sungkyunkwan University)
  • 투고 : 2016.10.27
  • 심사 : 2017.02.03
  • 발행 : 2017.03.01

초록

N-type crystalline silicon solar cells have high metal impurity tolerance and higher minority carrier lifetime that increases conversion efficiency. However, junction quality between the boron diffused layer and the n-type substrate is more important for increased efficiency. In this paper, the current status and prospects for boron diffused layers in N-type crystalline silicon solar cell applications are described. Boron diffused layer formation methods (thermal diffusion and co-diffusion using $a-SiO_X:B$), boron rich layer (BRL) and boron silicate glass (BSG) reactions, and analysis of the effects to improve junction characteristics are discussed. In-situ oxidation is performed to remove the boron rich layer. The oxidation process after diffusion shows a lower B-O peak than before the Oxidation process was changed into $SiO_2$ phase by FTIR and BRL. The $a-SiO_X:B$ layer is deposited by PECVD using $SiH_4$, $B_2H_6$, $H_2$, $CO_2$ gases in N-type wafer and annealed by thermal tube furnace for performing the P+ layer. MCLT (minority carrier lifetime) is improved by increasing $SiH_4$ and $B_2H_6$. When $a-SiO_X:B$ is removed, the Si-O peak decreases and the B-H peak declines a little, but MCLT is improved by hydrogen passivated inactive boron atoms. In this paper, we focused on the boron emitter for N-type crystalline solar cells.

키워드

참고문헌

  1. A. U. Rehman and S. H. Lee, Scientific World J., 13 (2013).
  2. K. Bothe, R. Sinton, and J. Schmidt, Progress in Photovoltaics, 13, 297 (2005). [DOI: https://doi.org/10.1002/pip.586]
  3. D. L. Meier, V. Chandrasekaran, H. Preston Davis, A. M. Payne, X. Wang, V. Yelundur, J. E. O'Neill, Y. W Ok, F. Zimbardi, and A. Rohatgi, IEEE JOURNAL OF PHOTOVOLTAICS, 1, 123 (2011). https://doi.org/10.1109/JPHOTOV.2011.2169944
  4. J. Sheng, W. Wang, S. Yuan, W. Cai, Y. Sheng, Y. Chen, J. Ding, N. Yuan, Z. Feng, and P. J. Verlinden, Sol. Energ. Mat. Sol. Cells, 152, 59 (2016). [DOI: https://doi.org/10.1016/j.solmat.2016.03.032]
  5. K. Ryu, E. Cho, A. Rohatgi, and Y. Ok, PROGRESS IN PHOTOVOLTAICS, 24, 1109 (2016). [DOI: https://doi.org/10.1002/pip.2775]
  6. M. A. Kessler, T. Ohrdes, B. Wolpensinger, R. Bock, and N. P. Harder, Proc. 34th IEEE Photovoltaic Specialists Conference (PVSC) (Philadelphia, USA, 2009) p. 001556.
  7. B. Singha and C. S. Solanki, Semicond. Sci. Technol, 31, 10 (2016). [DOI: https://doi.org/10.1088/0268-1242/31/3/035009]
  8. S. P. Phang, W. Liang, B. Wolpensinger, M. A. Kessler, and D. Macdonald, IEEE JOURNAL OF PHOTOVOLTAICS, 3, 261 (2013). [DOI: https://doi.org/10.1109/JPHOTOV.2012.2226332]
  9. K. Ryu, C. J. Choi, H. M. Park, D. H. Kim, A. Rohatgi, and Y. W. Ok, Sol. Energ. Mat. Sol. Cells, 146, 58 (2016). [DOI: https://doi.org/10.1016/j.solmat.2015. 11.031]
  10. J. Y. Cho, H.N.R. Shin, J. E. Lee, Y. S. Choi, J. C. Lee, H. Ph, T. J. Kim, M. I. Hwang, and E. C. Cho, Energy Procedia, 77, 279 (2015). [DOI: https://doi.org/10.1016/j.egypro.2015.07.039]
  11. P. Rothhardt, C. Demberger, A. Wolf, and D. Biro, Energy Procedia, 38, 305 (2013). [DOI: https://doi.org/10.1016/j.egypro.2013.07.282]
  12. N. Wehmeier, B. Lim, A. Merkle, A. Tempez, S. Legendre, H. Wagner, A. Nowack, T. Dullweber, and P. P. Altermatt, IEEE JOURNAL OF PHOTOVOLTAICS, 6, 119 (2016). [DOI: https://doi.org/10.1109/JPHOTOV.2015.2493364]
  13. P. Negrini, A. Ravaglia, and S. Solmi, J. Electrochem, 125, 609 (1978). [DOI: https://doi.org/10.1149/1.2131510]
  14. J. Engelhardt, A. Frey, L. Mahlstaedt, S. Gloger, G. Hahn, and B. Terheiden, Energy Procedia, 55, 235 (2014). [DOI: https://doi.org/10.1016/j.egypro.2014.08.050]
  15. J. Schon, M. C. Schubert, W. Warta, H. Savin, and A. Haarahiltunen, Phys. Status Solidi A, 207, 2589 (2010). [DOI: https://doi.org/10.1002/pssa.201026333]