Steel and Composite Structures

  • 제23권3호
  • /
  • Pages.251-261
  • /
  • 2017
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Vibration and stability of initially stressed sandwich plates with FGM face sheets in thermal environments

  • Chen, Chun-Sheng (Department of Mechanical Engineering, Lunghwa University of Science and Technology) ;
  • Liu, Fwu-Hsing (Department of Mechanical Engineering, Lunghwa University of Science and Technology) ;
  • Chen, Wei-Ren (Department of Mechanical Engineering, Lunghwa University of Science and Technology)
  • 투고 : 2015.01.18
  • 심사 : 2016.12.29
  • 발행 : 2017.02.28
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, thermal effect on the vibration and stability of initially stressed sandwich plates with functionally graded material (FGM) face sheets is analyzed. Material properties of FGM face sheet are graded continuously in the thickness direction. The variation of FGM properties assumes a simple power law distribution in terms of the volume fractions of the constituents. The governing equations of arbitrarily initially-stressed sandwich plates including the effects of transverse shear deformation and rotary inertia are derived. The initial stress is taken to be a combination of a uniaxial extensional stress and a pure bending stress in the examples. The eigenvalue problems are formed to study the vibration and buckling characteristics of simple supported initially stressed FGM/metal/FGM plates. The effects of volume fraction index, temperature rise, initial stress and layer thickness of metal on the natural frequencies and buckling loads are investigated. The results reveal that the volume fraction index, initial stresses and layer thickness of metal have significant influence on the vibration and stability of sandwich plates with FGM face sheets.

키워드

참고문헌

  1. Brunell, E.J. and Robertson, S.R. (1974), "Initially stressed Mindlin plates", AIAA J., 12(1), 1036-1045. https://doi.org/10.2514/3.49407
  2. Chakravarty, S. and Pradhan, K.K. (2014), "Free vibration of exponential functionally graded rectangular plates in thermal environment with general boundary conditions", Aeros. Sci. Tech., 36(1), 132-156. https://doi.org/10.1016/j.ast.2014.04.005
  3. Chen, C.S., Chen, T.J. and Chien, R.D. (2006), "Nonlinear vibration analysis of an initially stressed functionally graded plate", Thin-Wall. Struct., 44(8), 844-851. https://doi.org/10.1016/j.tws.2006.08.007
  4. Chen, C.S., Fung, C.P. and Yu, S.Y. (2008), "Investigation on the vibration and stability of functionally graded plates", J. Rein. Plast. Compos., 27(13), 1435-1447. https://doi.org/10.1177/0731684407086611
  5. Chen, C.S., Hsu, C.Y. and Tzou, G.J. (2009), "Vibration and stability of functionally graded plates based on a higher-order deformation theory", J. Rein. Plast. Compos., 28(10), 1215-1234. https://doi.org/10.1177/0731684408088884
  6. Ghannadpour, S.A.M., Ovesy, H.R. and Nassirnia, M. (2012), "Buckling analysis of functionally graded plates under thermal loadings using the finite strip method", Comput. Struct., 108-109(1), 93-99. https://doi.org/10.1016/j.compstruc.2012.02.011
  7. Javaheri, R. and Eslami, M.R. (2002), "Thermal buckling of functionally graded plates based on higher order theory", J. Thermal Stress., 25(7), 603-625. https://doi.org/10.1080/01495730290074333
  8. Kazerouni, S.M., Saidi, A.R. and Mohammadi, M. (2010), "Buckling analysis of thin functionally graded rectangular plates with two opposite edges simply supported", Int. J. Eng., Tran. B: Appl., 23(2), 179-192.
  9. Khalili, S.M.R. and Mohammadi, Y. (2012), "Free vibration analysis of sandwich plates with functionally graded face sheets and temperature-dependent material properties: A new approach", Eur. J. Mech., A/Solids, 35(1), 61-74. https://doi.org/10.1016/j.euromechsol.2012.01.003
  10. Li, Q., Iu, V.P. and Kou, K.P. (2009), "Three-dimensional vibration analysis of functionally graded material plates in thermal environment", J. Sound Vib., 324(3-5), 733-750. https://doi.org/10.1016/j.jsv.2009.02.036
  11. Loja, M.A.R., Mota, S.C.M. and Barbosa, J.I. (2013), "Analysis of functionally graded sandwich plate structures with piezoelectric skins, using B-spline finite strip method", Compos. Struct., 96(1), 606-615. https://doi.org/10.1016/j.compstruct.2012.08.010
  12. Mahi, A., Bedia, E.A.A. and Benkhedda, A. (2013), "Free vibration analysis of FGM plates under initial thermal stresses", Adv. Mater. Res., 682(1), 49-56. https://doi.org/10.4028/www.scientific.net/AMR.682.49
  13. Malekzadeh, P., Shahpari, S.A. and Ziaee, H.R. (2010), "Three-dimensional free vibration of thick functionally graded annular plates in thermal environment", J. Sound Vib., 329(4) 425-442. https://doi.org/10.1016/j.jsv.2009.09.025
  14. Matsunaga, H. (2005), "Thermal buckling of cross-ply laminated composite and sandwich plates according to a global higher order deformation theory", Compos. Struct., 68(1), 439-454. https://doi.org/10.1016/j.compstruct.2004.04.010
  15. Matsunaga, H. (2009), "Thermal buckling of functionally graded plates according to a 2D higher-order deformation theory", Compos. Struct., 90(1), 76-86. https://doi.org/10.1016/j.compstruct.2009.02.004
  16. Natarajan, S., Baiz, P.M., Ganapathi, M., Kerfriden, P. and Bordas, S. (2011), "Linear free flexural vibration of cracked functionally graded plates in thermal environment", Comput. Struct., 89(15-16), 1535-1546. https://doi.org/10.1016/j.compstruc.2011.04.002
  17. Pradyumna, S. and Bandyopadhyay, J.N. (2010), "Free vibration and buckling of functionally graded shell panels in thermal environments", Int. J. Struct. Stab. Dyn., 10(5), 1031-1053. https://doi.org/10.1142/S0219455410003889
  18. Rahimabadi, A.A., Natarajan, S. and Bordas, S.P.A. (2013), "Vibration of functionally graded material plates with cutouts & cracks in thermal environment", Key Eng. Mater., 560, 157-180. https://doi.org/10.4028/www.scientific.net/KEM.560.157
  19. Shafiee, A.A., Daneshmand, F., Askari, E. and Mahzoon, M. (2014), "Dynamic behavior of a functionally graded plate resting on Winkler elastic foundation and in contact with fluid", Struct. Eng. Mech., Int. J., 50(1), 53-71. https://doi.org/10.12989/sem.2014.50.1.053
  20. Shariat, B.A.S. and Eslami, M.R. (2007), "Buckling of thick functionally graded plates under mechanical and thermal load", Compos. Struct., 78(3), 433-439. https://doi.org/10.1016/j.compstruct.2005.11.001
  21. Shen, H.S. and Li, S.R. (2008), "Postbuckling of sandwich plates with FGM face sheets and temperature-dependent properties", Compos.: Part B Engng., 39(2), 332-344. https://doi.org/10.1016/j.compositesb.2007.01.004
  22. Shen, H.S. and Zhu, Z.H. (2010), "Buckling and postbuckling behavior of functionally graded nanotube-reinforced composite plates in thermal environments", Comput. Mater. Continua, 18(2), 155-182.
  23. Shi, P. and Dong, C.Y. (2012), "Vibration analysis of functionally graded annular plates with mixed boundary conditions in hermal environment", J. Sound Vib., 331(15), 3649-3662. https://doi.org/10.1016/j.jsv.2012.03.027
  24. Touloukian, Y.S. (1967), Thermophysical Properties of High Temperature Solid Materials, McMillan Co., New York, USA.
  25. Yang, J. and Shen, H.S. (2003), "Nonlinear analysis of functionally graded plates under transverse and in-plane loads", Int. J. Non-Linear Mech., 38(4), 467-482. https://doi.org/10.1016/S0020-7462(01)00070-1
  26. Zhao, X., Lee, Y.Y. and Liew, K.M. (2009), "Mechanical and thermal buckling analysis of functionally graded plates", Compos. Struct., 90(2), 161-171. https://doi.org/10.1016/j.compstruct.2009.03.005

피인용 문헌

  1. Vibration and mode shape analysis of sandwich panel with MWCNTs FG-reinforcement core vol.25, pp.3, 2017, https://doi.org/10.12989/scs.2017.25.3.347
  2. Effects of CNTs waviness and aspect ratio on vibrational response of FG-sector plate vol.25, pp.6, 2017, https://doi.org/10.12989/scs.2017.25.6.649
  3. A new simple three-unknown shear deformation theory for bending analysis of FG plates resting on elastic foundations vol.25, pp.6, 2017, https://doi.org/10.12989/scs.2017.25.6.717
  4. Size-dependent damped vibration and buckling analyses of bidirectional functionally graded solid circular nano-plate with arbitrary thickness variation vol.68, pp.2, 2017, https://doi.org/10.12989/sem.2018.68.2.171
  5. A novel shear and normal deformation theory for hygrothermal bending response of FGM sandwich plates on Pasternak elastic foundation vol.67, pp.3, 2017, https://doi.org/10.12989/sem.2018.67.3.219
  6. Vibration analysis of sandwich sectorial plates considering FG wavy CNT-reinforced face sheets vol.28, pp.5, 2017, https://doi.org/10.12989/scs.2018.28.5.541
  7. Damping and vibration response of viscoelastic smart sandwich plate reinforced with non-uniform Graphene platelet with magnetorheological fluid core vol.33, pp.6, 2017, https://doi.org/10.12989/scs.2019.33.6.891
  8. Vibration analysis of FG porous rectangular plates reinforced by graphene platelets vol.34, pp.2, 2020, https://doi.org/10.12989/scs.2020.34.2.215
  9. An inclined FGM beam under a moving mass considering Coriolis and centrifugal accelerations vol.35, pp.1, 2020, https://doi.org/10.12989/scs.2020.35.1.061
  10. Influence of porosity distribution on vibration analysis of GPLs-reinforcement sectorial plate vol.35, pp.1, 2017, https://doi.org/10.12989/scs.2020.35.1.111
  11. Vibrational characteristic of FG porous conical shells using Donnell's shell theory vol.35, pp.2, 2017, https://doi.org/10.12989/scs.2020.35.2.249
  12. Influence of internal pores and graphene platelets on vibration of non-uniform functionally graded columns vol.35, pp.2, 2017, https://doi.org/10.12989/scs.2020.35.2.295
  13. Smart analysis of doubly curved piezoelectric nano shells: Electrical and mechanical buckling analysis vol.25, pp.4, 2020, https://doi.org/10.12989/sss.2020.25.4.471
  14. Vibration behavior of functionally graded sandwich beam with porous core and nanocomposite layers vol.36, pp.1, 2020, https://doi.org/10.12989/scs.2020.36.1.001
  15. Vibration behavior of trapezoidal sandwich plate with functionally graded-porous core and graphene platelet-reinforced layers vol.36, pp.1, 2017, https://doi.org/10.12989/scs.2020.36.1.047
  16. Vibration analysis of sandwich sector plate with porous core and functionally graded wavy carbon nanotube-reinforced layers vol.37, pp.6, 2017, https://doi.org/10.12989/scs.2020.37.6.711
  17. Vibration analysis of damaged core laminated curved panels with functionally graded sheets and finite length vol.38, pp.5, 2017, https://doi.org/10.12989/scs.2021.38.5.477
  18. Bending analysis of the multi-phase nanocomposite reinforced circular plate via 3D-elasticity theory vol.40, pp.4, 2021, https://doi.org/10.12989/scs.2021.40.4.601