References
- G.M. Evans, The Effect of Stress Relieving on the Microstructure and Properties of C-Mn All-Weld Metal Deposits, Weld. J., 65-12 (1986), 326s-334s
- A.G. Olabi and M.S.J. Hashmi, The Effect of Post-Weld Heat-Treatment on Mechanical-Properties and Residual-Stresses Mapping in Welded Structural Steel, J. Mater. Process Tech., 55 (1995), 117-122 https://doi.org/10.1016/0924-0136(95)01794-1
- H.-T. Kim and S.-C. Kil, Trends of Welding Technologies (Heat Treatment), Journal of KWS, 21 (6) (2003), 3-11 (in Korean)
- S.-S. Kang and Y.-J. Lee, Procedure of PWHT in Actual Welding Industry, Journal of KWS, 21 (6) (2003), 12-15 (in Korean)
- S.-S. Kang and Y.-J. Lee, PWHT of Joint in Dissimilar Materials, Journal of KWS, 21 (6) (2003), 16-19(in Korean)
- S. Paddea, J.A. Francis, A.M. Paradowska, P.J. Bouchard and I.A. Shibli, Residual Stress Distributions in a P91 Steel-Pipe Girth Weld before and after Post Weld Heat Treatment, Mat. Sci. Eng. A, 534 (2012), 663-672 https://doi.org/10.1016/j.msea.2011.12.024
- J.H. Kim and E.P. Yoon : Notch Position in the HAZ Specimen of Reactor Pressure Vessel Steel, J. Nucl. Mater., 257 (1998), 303-308 https://doi.org/10.1016/S0022-3115(98)00451-6
- Y.-S. Ahn, H.-D. Kim, T.-S. Byun, Y.-J. Oh, G.-M. Kim and J.-H. Hong, Application of Intercritical Heat Treatment to Improve Toughness of SA508 Cl.3 Reactor Pressure Vessel Steel, Nuclear Engineering and Design, 194 (1999), 161-177 https://doi.org/10.1016/S0029-5493(99)00196-X
- B.K. Choudhary, C. Phaniraj, K. Bhanu Sankara Rao and S.L. Mannan, Creep Deformation Behaviour and Kinetic Aspects of 9Cr-1Mo Ferritic Steel, ISIJ Int., 41 (2001), s73-s80 https://doi.org/10.2355/isijinternational.41.Suppl_S73
- D. Lonsdale and P.E.J. Flewitt, The Role of Grain Size on the Ductile-Brittle Transition of a 2.25 Pct Cr-1 Pct Mo Steel, Metall. Trans. A, 9 (1978), 1619-1623 https://doi.org/10.1007/BF02661944
- Y.M. Kim, S.K. Kim, Y.J. Lim and N.J. Kim, Effect of Microstructure on the Yield Ratio and Low Temperature Toughness of Linepipe Steels, ISIJ Int., 42 (2002), 1571- 1577 https://doi.org/10.2355/isijinternational.42.1571
- B. Hwang, Y.G. Kim, S. Lee, Y.M. Kim, N.J. Kim and J.Y. Yoo, Effective Grain Size and Charpy Impact Properties of High-Toughness X70 Pipeline Steels, Metall. Mater. Trans. A, 36 (2005), 2107-2114 https://doi.org/10.1007/s11661-005-0331-9
- H. Qiu, T. Hanamura and S. Torizuka, Influence of Grain Size on the Ductile Fracture Toughness of Ferritic Steel, ISIJ Int., 54 (2014), 1958-1964 https://doi.org/10.2355/isijinternational.54.1958
- A. Cabral, A.W. Thompson, I.M. Bernstein and D.H. Stone, The Thermal Fatigue Behavior of Near-eutectoid Steel, Materials Science and Engineering, 93 (1987), 73-82 https://doi.org/10.1016/0025-5416(87)90413-7
- Y. Peng, H. Xu and M. Zhang, Effects of Simulated On-Fire Processing Conditions on the Microstructure and Mechanical Performance of Q345R Steel, International Journal of Minerals, Metallurgy and Materials, 23 (2016), 49-56 https://doi.org/10.1007/s12613-016-1210-7
- R. Song, D. Ponge, D. Raabe and R. Kaspar, Microstructure and Crystallographic Texture of an Ultrafine Grained C-Mn Steel and their Evolution during Warm Deformation and Annealing, Acta Mater., 53 (2005), 845-858 https://doi.org/10.1016/j.actamat.2004.10.051
- A. Karmakar, M. Mandal, A. Mandal, M. B. Sk, S. Mukherjee and D. Chakrabarti, Effect of Starting Microstructure on the Grain Refinement in Cold-Rolled Low-Carbon Steel During Annealing at Two Different Heating Rates, Metall. Mater. Trans. A, 47 (2016), 268-281 https://doi.org/10.1007/s11661-015-3248-y