Journal of the Korean Wood Science and Technology

The Korean Society of Wood Science & Technology (한국목재공학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Moment Resistance of Rigid Frame with Glued Joint

강절형 목질접합부의 모멘트저항성능 평가

  • Lee, In-Hwan (Program of Forest Biomaterials Engineering, Division of Forest Material Science & Engineering, Kangwon National University) ;
  • Song, Yo-Jin (Program of Forest Biomaterials Engineering, Division of Forest Material Science & Engineering, Kangwon National University) ;
  • Hong, Soon-Il (Program of Forest Biomaterials Engineering, Division of Forest Material Science & Engineering, Kangwon National University)
  • 이인환 (강원대학교 산림환경과학대학 산림응용공학부 산림바이오소재공학전공) ;
  • 송요진 (강원대학교 산림환경과학대학 산림응용공학부 산림바이오소재공학전공) ;
  • 홍순일 (강원대학교 산림환경과학대학 산림응용공학부 산림바이오소재공학전공)
  • Received : 2016.10.19
  • Accepted : 2016.11.08
  • Published : 2017.01.25
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, specimens of rigid frame joint were produced by integrating joints with adhesive and other specimens were produced by inserting a wooden gusset integrated with a column member into a slit-processed beam member and joining them with pins. Then the moment resistance performances of the specimens were examined. For the wooden gusset, a GFRP-reinforced wooden gusset was used. The calculation results of perfect elasto-plasticity for the frame specimens for which a GFRP-reinforced wooden gusset was inserted into and joined with the slit-processed beam member by pins were 20-80% lower compared to the control group which consisted of steel plate-inserted frame specimens. The rigid frame specimens for which the column and beam members have been integrated with adhesive showed almost no initial residual transformations, as well as 38% greater initial rigidity and 41% greater plasticity compared to the steel plate-inserted joint.

본 연구에서는 접합부가 접착제로 일체화된 강절형 기둥-보 접합 시험편과 슬릿 가공한 보부재에 기둥부재와 일체화된 목질접합물을 삽입하고 핀으로 접합한 시험편을 제작하여 모멘트 저항성능을 검토하였다. 목질접합물은 GFRP로 보강한 적층판을 제작하여 사용하였다. 슬릿 가공된 보부재에 GFRP보강적층판을 삽입하고 핀으로 접합된 기둥-보 시험편들은 완전탄소성 모델 분석으로 산출된 특성치들이 대조군인 강판삽입형 기둥-보 시험편보다 20~80% 낮게 측정 되었다. 기둥부재와 보부재가 접착제로 일체화된 강절형 기둥-보 시험편은 초기잔류변형이 거의 관찰되지 않았으며, 강판 삽입형 접합부보다 38% 향상된 초기강성과 41% 향상된 소성률이 측정되었다.

Keywords

References

  1. Beak, H.S., Iimura, Y., Imai, Fujio. 2010. Experimental study on the cyclic behavior of moment-resisting timber frames connected by threaded steel shaft and drift pin. Architectural institute of korea, 26(12): 11-18.
  2. Cho, S.H., Lee, H.W., Park, M.J., Kim, T., Kim, J.H. Analysis model for approximate evaluation of stiffness for semi-rigid connection of wooden structures. 2015. J. Comput. Struct. Eng. Inst. Korea, 28(1): 93-100. https://doi.org/10.7734/COSEIK.2015.28.1.93
  3. DIN EN 14080. 2013. Timber structures - Glued laminated timber and glued solid timber - Requirements.
  4. Frank, M., Dominik, N. 2012. New timber bridges-inventive design by block-gluing.
  5. Jung, H.J., Song, Y.J., Lee, I.H., Hong, S.I. 2016. Moment resistance performance evaluation of larch glulam joints using GFRP-reinforced laminated plate and GFRP rod. J. Korean Wood Sci. Technol. 44(1): 40-47. https://doi.org/10.5658/WOOD.2016.44.1.40
  6. Jung, H.J., Hong, S.I. 2015. Adhesive performance and fracture toughness evaluation of frp-reinforced laminated plate. J. Korean Wood Sci. Technol. 43(6): 868-875. https://doi.org/10.5658/WOOD.2015.43.6.868
  7. Lee, I.H., Hong, S.I. 2016. Bending and bonding strength performances of larix block-glued glulam. J. Korean Wood Sci. Technol. 44(3): 315-322. https://doi.org/10.5658/WOOD.2016.44.3.315
  8. Lee, I.H., Song, Y.J., Jung, H.J., Hong, S.I. 2015. Moment resistance performance evaluation of larch glulam joint bonded in glass fiber reinforced plastic rods J. Korean Wood Sci. Technol. 43(1): 60-67. https://doi.org/10.5658/WOOD.2015.43.1.60
  9. Park, J.C., Shin, Y.J., Hong, S.I. 2009. Bonding performance of glulam reinforced with glass fiber-reinforced plastics. J. Korean Wood Sci. Technol. 37(4): 357-363.
  10. Song, J.M., Park, H.K. 2008. The structure analysis of the fist connection resistance performance for traditional wooden structural system improvement. Journal of the architectural institute of Korea: Structure & construction. 24(6): 3-10.