Computers and Concrete

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Combined effect of CFRP-TSR confinement on circular reinforced concrete columns

  • Berradia, Mohammed (Department of Civil Engineering, Laboratory of Structures, Geotechnics and Risks (LSGR), Hassiba Benbouali University of Chlef) ;
  • Kassoul, Amar (Department of Civil Engineering, Laboratory of Structures, Geotechnics and Risks (LSGR), Hassiba Benbouali University of Chlef)
  • Received : 2016.04.20
  • Accepted : 2016.10.18
  • Published : 2017.01.25
⟨ Previous Next ⟩

Abstract

The use of external carbon-fiber-reinforced polymer (CFRP) wraps is one of the most effective techniques existing for the confinement of the circular concrete columns. Currently, several researches have been made to develop models for predicting the behavior of this type of confinement. The disadvantage of the most models, is to not take into account the contribution of the transverse steel reinforcements (TSR) effect, However, very limited models have been recently developed that considers this combined effect and gives less accurate results. This paper presents the development of a new model for the axial behavior of circular concrete columns confined by combining external CFRP warps-and-internal TSR (hoops or spirals) based on the existing experimental data. The comparison between the proposed model and the experimental results showed good agreement comparing to the several existing models. Moreover, the expressions of estimating the ultimate strength and the corresponding strain are simple and precise, which make it easy to use in the design applications.

Keywords

References

  1. ACI 318 (2011), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, U.S.A.
  2. ACI 440 (2008), Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute; Farmington Hills, MI, U.S.A.
  3. Benzaid, R., Mesbah, H. and Chikh N.E. (2010), "FRP-confined concrete cylinder: axial com0pression experiments and strength model", J. Reinf. Plast. Compos., 29(16), 2469-2488. https://doi.org/10.1177/0731684409355199
  4. Chastre, C. and Silva, M.A.G. (2010), "Monotonic axial behavior and modeling of RC circular columns confined with CFRP", Eng. Struct., 32(8), 2268-77. https://doi.org/10.1016/j.engstruct.2010.04.001
  5. Eid, R. and Paultre, P. (2008), "Analytical model for FRP-confined circular reinforced concrete columns", J. Compos. Constr., 12(5), 541-52. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:5(541)
  6. Fanggi, B.A.L. and Ozbakkaloglu, T. (2015), "Square FRP-HSC-steel composite columns: Behavior under axial compression", Eng. Struct., 92, 156-171. https://doi.org/10.1016/j.engstruct.2015.03.005
  7. Harajli, M.H., Hantouche, E. and Soudki, K. (2006), "Stress-strain model for fiber reinforced polymer jacketed concrete columns", ACI. Struct. J., 103(5), 672-705.
  8. Hu, H. and Seracino, R. (2013), "Analytical model for FRP-andsteel-confined circular concrete columns in compression", J. Compos. Constr., 18(3), A4013012, 1-7.
  9. Jiang, T. and Teng, J.G. (2007), "Analysis-oriented stress-strain models for FRP-confined concrete", Eng. Struct., 29(11), 2968-2986. https://doi.org/10.1016/j.engstruct.2007.01.010
  10. Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for FRP-confined concrete", Const. Build. Mater., 17(6-7), 471-489. https://doi.org/10.1016/S0950-0618(03)00045-X
  11. Lee, J.Y., Yi, C.K., Jeong, H.S., Kim, S.W. and Kim, J.K. (2010), "Compressive reponse of concrete confined with steel spirals and FRP composites", J. Compos. Mater., 44(4), 1-24.
  12. Lu, W.Y., Yu, H.W., Chen, C.L., Liu, S.L. and Chen, T.C. (2015), "High-strength concrete deep beams with openings strengthened by carbon fiber reinforced plastics", Comput. Concrete, 15(1), 21-35. https://doi.org/10.12989/cac.2015.15.1.021
  13. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theorical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-26. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  14. Morsy, A. and Mahmoud, E.T. (2013), "Bonding techniques for flexural strengthening of R.C. beams using CFRP laminates", Ain. Sha. Eng. J., 4(3), 369-374. https://doi.org/10.1016/j.asej.2012.11.004
  15. Nam, J.W., Yoon, I.S. and Yi, S.T. (2016), "Numerical evaluation of FRP composite retrofitted reinforced concrete wall subjected to blast load", Comput. Concrete, 17(2), 215-225. https://doi.org/10.12989/cac.2016.17.2.215
  16. Ozbakkaloglu, T. (2013), "Compressive behavior of concretefilled FRP tube columns: Assessment of critical column parameters", Eng. Struct., 51, 188-199. https://doi.org/10.1016/j.engstruct.2013.01.017
  17. Ozbakkaloglu, T., Lim, J.C. and Vicent, T. (2013), "FRP-confined concrete in circular sections: Review and assessment of stressstrain models", Eng. Strct., 49, 1068-1088 https://doi.org/10.1016/j.engstruct.2012.06.010
  18. Popovics, S. (1973), "Numerical approach to the complete stressstrain relation for concrete", Cement Concrete Res., 3(5), 583-99. https://doi.org/10.1016/0008-8846(73)90096-3
  19. Richard, R.M. and Abbott, B.J. (1975), "Versatile elastic-plastic stress-strain formula", J. Eng. Mech. Div., ASCE, 101(4), 511-515.
  20. Saadatmanesh, H., Ehsani, M.R. and Li, M.W. (1994), "Strength and ductility of concrete columns externally reinforced with fiber composite straps", ACI. Struct., 91(4), 434-447.
  21. Sadeghian, P. and Fam, A. (2015), "Improved design-oriented confinement models for FRP-wrapped concrete cylinders based on statistical analyses", Eng. Struct., 87, 162-182. https://doi.org/10.1016/j.engstruct.2015.01.024
  22. Samaan, M., Mirmiran, A. and Shahawy, M. (1998), "Model of concrete confined by fiber composites", J. Struct. Eng., 124(9), 1025-1031. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025)
  23. Shirmohammadi, F., Esmaeily, A. and Kiaeipour, Z. (2015), "Stress-strain model for circular concrete columns confined by FRP and conventional lateral steel", Eng. Struct., 84, 395-405. https://doi.org/10.1016/j.engstruct.2014.12.005
  24. Teng, J.G., Lin, G. and Yu, T. (2014), "Analysis-oriented stressstrain model for concrete under combined FRP-steel confinement", J. Compos. Constr., 19(5), 04014084-1-14. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000549
  25. Thorenfeldt, E., Tomaszewicz, A. and Jensen, J.J. (1987), "Mechanical properties of high strength concrete and application in design", Proceedings of the Symposium on Utilization of High Strength Concrete, Tapir, Trondheimr, Norway.
  26. Wang, Z.Y., Wang, D.Y., Smith, S.T. and Lu, D.G. (2012), "Experimental testing and analytical modeling of CFRPconfined large circular RC columns subjected to cyclic axial compression", Eng. Struct., 40, 64-74. https://doi.org/10.1016/j.engstruct.2012.01.004
  27. Wei, Y.Y. and Wu, Y.F. (2012), "Unified stress-strain model of concrete for FRP-confined columns", Const. Build. Mater., 26(1), 381-392. https://doi.org/10.1016/j.conbuildmat.2011.06.037
  28. Youssef, M.N., Feng, M.Q. and Mosallam, A.S. (2007), "Stressstrain model for concrete confined by FRP composites", Compos. Part B., 38(5-6), 614-628. https://doi.org/10.1016/j.compositesb.2006.07.020
  29. Zhang, H.Y., Hao, X. and Fan, W. (2016), "Experimental study on high temperature properties of carbon fiber sheets strengthened concrete cylinders using geopolymer as adhesive", Proc. Eng., 135, 47-55. https://doi.org/10.1016/j.proeng.2016.01.078

Cited by

  1. Seismic response of concrete columns with nanofiber reinforced polymer layer vol.20, pp.3, 2017, https://doi.org/10.12989/cac.2017.20.3.361
  2. Study on the performance of concrete-filled steel tube beam-column joints of new types vol.26, pp.6, 2020, https://doi.org/10.12989/cac.2020.26.6.547