DOI QR코드

DOI QR Code

Shaking table test of wooden building models for structural identification

  • Altunisik, Ahmet C. (Department of Civil Engineering, Karadeniz Technical University)
  • 투고 : 2016.02.18
  • 심사 : 2016.10.28
  • 발행 : 2017.01.25

초록

In this paper, it is aimed to present a comparative study about the structural behavior of tall buildings consisting of different type of materials such as concrete, steel or timber using finite element analyses and experimental measurements on shaking table. For this purpose, two 1/60 scaled 28 and 30-stories wooden building models with $40{\times}40cm$ and $35{\times}35cm$ ground/floor area and 1.45 m-1.55 m total height are built in laboratory condition. Considering the frequency range, mode shapes, maximum displacements and relative story drifts for structural models as well as acceleration, displacement and weight limits for shaking table, to obtain the typical building response as soon as possible, balsa is selected as a material property, and additional masses are bonded to some floors. Finite element models of the building models are constituted in SAP2000 program. According to the main purposes of earthquake resistant design, three different earthquake records are used to simulate the weak, medium and strong ground motions. The displacement and acceleration time-histories are obtained for all earthquake records at the top of building models. To validate the numerical results, shaking table tests are performed. The selected earthquake records are applied to first mode (lateral) direction, and the responses are recorded by sensitive accelerometers. Comparisons between the numerical and experimental results show that shaking table tests are enough to identify the structural response of wooden buildings. Considering 20%, 10% and 5% damping rations, differences are obtained within the range 4.03-26.16%, 3.91-65.51% and 6.31-66.49% for acceleration, velocity and displacements in Model-1, respectively. Also, these differences are obtained as 0.49-31.15%, 6.03-6.66% and 16.97-66.41% for Model-2, respectively. It is thought that these differences are caused by anisotropic structural characteristic of the material due to changes in directions parallel and perpendicular to fibers, and should be minimized using the model updating procedure.

키워드

참고문헌

  1. Buchanan, A., Deam, B., Fragiacomo, M., Pampanin, S. and Palermo, A. (2008), "Multi-storey prestressed timber buildings in New Zealand", Struct. Eng. Mech., 18(2), 166-173.
  2. Ceccotti, A. (2008), "New technologies for construction of medium-rise buildings in seismic regions: the XLAM case", Struct. Eng. Int., 18(2), 156-165. https://doi.org/10.2749/101686608784218680
  3. Ceccotti, A., Sandhaas, C., Okabe, M., Yasumura, M., Minowa, C. and Kawai, N. (2013), "SOFIE project-3D shaking table test on a seven-storey full-scale cross-laminated timber building", Earthq. Eng. Struct. Dyn., 42(13), 2003-2021. https://doi.org/10.1002/eqe.2309
  4. Flatscher, G. and Schickhofer, G. (2015), "Shaking-table test of a cross-laminated timber structure", Proc. Inst. Civ. Engineers/Struct. Build., 168(11), 878-888. https://doi.org/10.1680/stbu.13.00086
  5. Gavric, I., Fragiacomo, M. and Ceccotti, A. (2015), "Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures", Mater. Struct., 48(6), 1841-1857. https://doi.org/10.1617/s11527-014-0278-7
  6. Hosseinzadeh, N., Sangsari, M.K. and Ferdosiyeh, H.T. (2014), "Shake table study of annular baffles in steel storage tanks as sloshing dependent variable dampers", J. Loss. Prevent. Proc., 32, 299-310. https://doi.org/10.1016/j.jlp.2014.09.011
  7. Huang, Y., Briseghella, B., Zordan, T., Wu, Q. and Chen, B. (2014), "Shaking table tests for the evaluation of the seismic performance of an innovative lightweight bridge with CFST composite truss girder and lattice pier", Eng. Struct., 75, 73-86. https://doi.org/10.1016/j.engstruct.2014.05.039
  8. Hummel, W.S.J. and Vogt, T. (2014), "Earthquake design of timber structures-remarks on force-based design procedures for different wall systems", Eng. Struct., 76, 124-137. https://doi.org/10.1016/j.engstruct.2014.06.037
  9. Karsh, J.E. (2013), "Connection solutions in modern timber structures", American institute of architects continuing education systems course, Washington, USA.
  10. Khelifa, M., Auchet, S., Meausoone, P.J. and Celzard, A. (2015), "Finite element analysis of flexural strengthening of timber beams with Carbon Fibre-Reinforced Polymers", Eng. Struct., 101, 364-375. https://doi.org/10.1016/j.engstruct.2015.07.046
  11. Lestuzzi, P. and Bachmann, H. (2007), "Displacement ductility and energy assessment from shaking table tests on RC structural walls", Eng. Struct., 29(8), 1708-1721. https://doi.org/10.1016/j.engstruct.2006.09.009
  12. Liu, J., Liu, F., Kong, X. and Yu, L. (2014), "Large-scale shaking table model tests of a seismic measures for concrete faced rockfill dams(CFRD)", Soil. Dyn. Earthq. Eng., 61, 152-163.
  13. Magnus, L. (2008), "Historic timber roof structures construction technology and structural behaviour", Master Thesis, Catholic University of Leuven.
  14. Oudjene, M. and Khelifa, M. (2009), "Elasto-plastic constitutive law for wood behaviour under compressive loadings", Constr. Build. Mater., 23(11), 3359-3366. https://doi.org/10.1016/j.conbuildmat.2009.06.034
  15. Petrone, C., Magliulo, G. and Manfredi, G. (2014), "Shake table tests for the seismic assessment of hollow brick internal partitions", Eng. Struct., 72, 203-214. https://doi.org/10.1016/j.engstruct.2014.04.044
  16. Phansri, B., Charoenwongmit, S., Warnitchai, P., Shin, D.H. and Park, K.H. (2010), "Numerical simulation of shaking table test on concrete gravity dam using plastic damage model", Struct. Eng. Mech., 36(4), 481-497. https://doi.org/10.12989/sem.2010.36.4.481
  17. Polastri, A., Pozza, L., Trutalli, D., Scotta, R. and Smith I. (2014), "Structural characterization of multistory buildings with CLT cores", 13th World Conference on Timber Engineering, WCTE 2014, Quebek City, Canada.
  18. Pozza, L., Scotta, R., Trutalli, D. and Polastri, A. (2015), "Behaviour factor for innovative massive timber shear walls", Bull. Earthq. Eng., 13(11), 3449-3469. https://doi.org/10.1007/s10518-015-9765-7
  19. Pozza, L., Scotta, R., Trutalli, D. and Polastri, A. (2015), "Behaviour factor for innovative massive timber shear walls", Bull. Earthq. Eng., 13(11), 3449-3469. https://doi.org/10.1007/s10518-015-9765-7
  20. Pozza, L., Scotta, R., Trutalli, D., Polastri, A. and Smith, I. (2016), "Experimentally based q-factor estimation of CLT walls", Proc. Inst. Civ. Engineers: Struct. Build., 169(7), 492-507. https://doi.org/10.1680/jstbu.15.00009
  21. Rabinovitch, O. and Madah, H. (2011), "Finite element modeling and shake-table testing of unidirectional infill masonry walls under out-of-plane dynamic loads", Eng. Struct., 33(9), 2683-2696. https://doi.org/10.1016/j.engstruct.2011.05.019
  22. Rochon-Cyr, M. and Leger, P. (2009), "Shake table sliding response of a gravity dam model including water uplift pressure", Eng. Struct., 31(8), 1625-1633. https://doi.org/10.1016/j.engstruct.2009.03.001
  23. SAP2000 (2015), Integrated Finite Element Analysis and Design of Structures, Computers and Structures Inc, Berkeley, California, USA.
  24. Tsai, M.H., Wu, S.Y., Chang, K.C. and Lee, G.C. (2007), "Shaking table tests of a scaled bridge model with rolling-type seismic isolation bearings", Eng. Struct., 29(5), 694-702. https://doi.org/10.1016/j.engstruct.2006.05.025
  25. Vieux-Champagne, F., Sieffert, Y., Grange, S., Polastri, A., Ceccotti, A. and Daudeville, L. (2014), "Experimental analysis of seismic resistance of timber-framed structures with stones and earth infill", Eng. Struct., 69, 102-115. https://doi.org/10.1016/j.engstruct.2014.02.020
  26. Wilson, P. and Elgamal, A. (2015), "Shake table lateral earth pressure testing with dense c-${\phi}$ backfill", Soil. Dyn. Earthq. Eng., 71, 13-26. https://doi.org/10.1016/j.soildyn.2014.12.009
  27. Wu, Y.M. and Samali, B. (2002), "Shake table testing of a base isolated model", Eng. Struct., 24(9), 1203-1215. https://doi.org/10.1016/S0141-0296(02)00054-8
  28. Yang, C.Y. and Cheung, M.M.S. (2011), "Shake table test of cable-stayed bridge subjected to non-uniform excitation", Procedia Eng., 14, 931-938. https://doi.org/10.1016/j.proeng.2011.07.117
  29. Yu, J., Zhang, Y. and Lu, Z. (2014), "Seismic rehabilitation of RC frame using epoxy injection technique tested on shaking table", Struct. Eng. Mech., 52(3), 541-558. https://doi.org/10.12989/sem.2014.52.3.541
  30. Zamani, S., El-Emam, M.M. and Bathurst, R.J. (2011), "Comparison of numerical and analytical solutions for reinforced soil wall shaking table tests", Geomech. Eng., 3(4), 291-321. https://doi.org/10.12989/gae.2011.3.4.291

피인용 문헌

  1. Seismic responses of a metro tunnel in a ground fissure site vol.15, pp.2, 2017, https://doi.org/10.12989/gae.2018.15.2.775
  2. Seismic fragility analysis of wood frame building in hilly region vol.20, pp.1, 2021, https://doi.org/10.12989/eas.2021.20.1.097