DOI QR코드

DOI QR Code

A method to evaluate the risk-based robustness index in blast-influenced structures

  • 투고 : 2015.05.19
  • 심사 : 2016.11.02
  • 발행 : 2017.01.25

초록

Introduction of robustness index in the structure is done in three ways: deterministic robustness index, probabilistic robustness index, and risk-based robustness index. In past decades, there have been numerous researches to evaluate robustness index in both deterministic and probabilistic ways. In this research, by using a risk analysis, a risk-based robustness index has been defined for the structure. By creating scenarios in accordance with uncertainty parameters of critical and unexpected gas blast accident, a new method has been suggested for evaluating risk-based robustness index. Finally, a numerical example for the evaluation of risk-based robustness index of a four-storey reinforced concrete moment frame, designed and built based on Eurocode 8 code, has been presented with results showing a lower risk of robustness.

키워드

참고문헌

  1. Abdollahzadeh, G.R. and Faghihmaleki, H. (2014), "Response modification factor of SMRF improved with EBF and BRBs", J. Adv. Res. Dyn. Contr. Syst., 6(4), 42-55.
  2. Abdollahzadeh, G.R. and Faghihmaleki, H. (2016a), "Effect of seismic improvement techniques on a structure in seismic-explosive probabilistic two-hazard risk", Int. J. Struct. Eng., 7(3), 314-331. https://doi.org/10.1504/IJSTRUCTE.2016.077726
  3. Abdollahzadeh, G.R. and Faghihmaleki, H. (2016b), "Seismic-explosion risk-based robustness index of structures", Int. J. Damage Mech., doi:10.1177/1056789516651919.
  4. Abdollahzadeh, G.R. and Nemati, M. (2014), "Risk Assessment of Structures Subjected to Blast", Int. J. Damage Mech., 23(1), 3-24, doi: 10.1177/1056789513482479.
  5. Abdollahzadeh, G.R., Nemati, M. and Avaze, M. (2016), "Probability assessment and risk management of progressive collapse in strategic buildings facing blast loads", Civ. Eng. Infrastruct. J., 49(2), 327-338
  6. Asprone, D., Jalayer, F., Prota, A. and Manfredi, G. (2008), "Probabilistic assessment of blast-induced progressive collapse in a seismic retrofitted RC structure", The 14th World Conference on Earthquake Engineering, Beijing, China.
  7. Andre, J., Beale, R. and Baptista, M.A. (2015), "New indices of structural robustness and structural fragility", Struct. Eng. Mech., 56(6), 1063-1093. https://doi.org/10.12989/sem.2015.56.6.1063
  8. Baker, W.E. (1973), "Explosions in the air", Austin and London. University of Texas Press.
  9. Baker, J.W., Schubert, M. and Faber, M.H. (2008), "On the assessment of robustness", Struct. Saf., 30(3), 253-267. https://doi.org/10.1016/j.strusafe.2006.11.004
  10. Baker, W.E., Cox, P., Westine, P., Kulesz, J. and Strehlow, R. (1983), "Explosion hazards and evaluation", Amsterdam, Elsevier.
  11. Branco, J.M., and Neves, L.A.C. (2001), "Robustness of timber structures in seismic areas", Eng. Struct., 33(11), 3099-3105. https://doi.org/10.1016/j.engstruct.2011.02.026
  12. Cassiano, D., D'Aniello, M., Rebelo, C. and Silva, L.S. (2016), "Influence of Seismic design rules on the robustness of steel moment resisting frames", Steel Compos. Struct., 21(3), 479-500. https://doi.org/10.12989/scs.2016.21.3.479
  13. EN 1990, Eurocode 0. (2002), "Basis of structural design", Brussels (Belgium): CEN, European Standard.
  14. EN 1991-1-7, Eurocode 1. (2006), "Actions on structures. Part 1-7: general actions-accidental actions", Brussels (Belgium): CEN, European Standard.
  15. Eurocode 8. (2005), "Design of structures for earthquake resistance", Comite Europeen de Normalisation, Brussels.
  16. GSA. (2003), "Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects GSA", General Services Administration, Washington, DC.
  17. Guedri, M., Cogan, S. and Bouhaddi, N. (2012), "Robustness of structural reliability analyses to epistemic uncertainties", Mech. Syst. Sign. Proc., 28, 458-469. https://doi.org/10.1016/j.ymssp.2011.11.024
  18. Henrych, J. (1979), "The dynamics of explosion and its use", Amsterdam and New York, Elsevier Scientific Publishing Company.
  19. Jahromi, H.Z., Vlassis, A.G. and Izzuddin, B.A. (2013), "Modelling approaches for robustness assessment of multi-storey steel-composite buildings", Eng. Struct., 51, 278-294. https://doi.org/10.1016/j.engstruct.2013.01.028
  20. JCSS. (2002), "Joint committee on structural safety", Probabilistic model code, JCSS Publication, http://www.jcss.ethz.ch/.
  21. JCSS. (2008), "Joint committee on structural safety", Risk assessment in engineering principles. System representation & risk criteria, http://www.jcss.ethz.ch/.
  22. Khaloo, A., Nozhati, S., Masoomi, H. and Faghihmaleki, H. (2016), "Influence of earthquake record truncation on fragility curves of RC frames with different damage indices", J. Build. Eng., 7, 23-30. https://doi.org/10.1016/j.jobe.2016.05.003
  23. Khandelwala, K. and El-Tawil, S. (2011), "Pushdown resistance as a measure of robustness in progressive collapse analysis", Eng. Struct., 33(9), 2653-2661. https://doi.org/10.1016/j.engstruct.2011.05.013
  24. Lu, D.G., Cui, S.S., Song, P.Y. and Chen, Z.H. (2010), "Robustness Assessment for Progressive Collapse of Framed Structures using Pushdown Analysis Method", 4th International Workshop on Reliable Engineering Computing (REC 2010), National University of Singapore, doi:10.3850/978-981-08-5118-7-063.
  25. Nielsen, J.J. (2009), "Probabilistic analysis of the robustness of earthquake resistant steel structures", Master Thesis, Faculty of Engineering and Science and Medicine, Aalborg University.
  26. Podrouzek, J., Strauss, A. and Bergmeister, K. (2014), "Robustness-based performance assessment of a prestressed concrete bridge", Struct. Concrete, 15(2), 248-257. https://doi.org/10.1002/suco.201300002
  27. Sadovsky, M.A. (1952), "Mechanical effects of air shock waves from explosion according to experiments", Physics of explosions: symposium-No. 4, AN SSR, Moscow.
  28. Soltani, R. and Sadjadi, S.J. (2014), "Reliability optimization through robust redundancy allocation models with choice of component type under fuzziness", Proceedings of the Institution of Mechanical Engineers, Part O: J. Risk Reliability, 228(5), 449-459. https://doi.org/10.1177/1748006X14527075
  29. Sorensen, D.J. (2011), "Framework for robustness assessment of timber structures", Eng. Struct., 33(11), 3078-3092.
  30. UFC. (2009), "Design of buildings to resist progressive collapse", Unified Facilities Criteria, US Department of Defense, Washington, DC.

피인용 문헌

  1. Seismic reliability assessment of structures using artificial neural network vol.11, 2017, https://doi.org/10.1016/j.jobe.2017.04.001
  2. Distribution of accumulated irrecoverable hysteretic energy in MDOF structures 2017, https://doi.org/10.1108/MMMS-05-2017-0028
  3. Proposal of a probabilistic assessment of structural collapse concomitantly subject to earthquake and gas explosion 2017, https://doi.org/10.1007/s11709-017-0427-5
  4. A survey of hysteresis energy distribution and lateral displacement in steel buildings with CCB brace at internal and external frames vol.9, pp.1, 2018, https://doi.org/10.1108/IJSI-03-2017-0018
  5. Reliability sensitivity analysis method for time-dependent problem based on first-passage method pp.2041-3009, 2018, https://doi.org/10.1177/0954408918809596
  6. Using Risk-based Robustness Index for Seismic Improvement of Structures vol.23, pp.3, 2019, https://doi.org/10.1007/s12205-019-0350-5
  7. Design of repairable regular steel buildings with square plan based on seesaw motion of building structure and using DADAS dampers vol.8, pp.3, 2017, https://doi.org/10.1108/ijsi-07-2016-0025
  8. Fragility Curves for RC Structure under Blast Load Considering the Influence of Seismic Demand vol.10, pp.2, 2017, https://doi.org/10.3390/app10020445
  9. Effect of shear zone on dynamic behaviour of rock tunnel constructed in highly weathered granite vol.23, pp.3, 2017, https://doi.org/10.12989/gae.2020.23.3.245