초록
원유 탱크나 가스 저장소 등과 같이 상시 폭발 가능한 농도의 지역을 0종 지역이라고 한다. 0종지역에서 각종 장비를 사용하기 위해서는 본질적으로 스파크가 일어나지 않는다는 것을 보증할 수 있는 본질안전인증을 득해야 한다. 본질안전인증을 취득하는 장치는 대부분 간단한 단품 소자이거나 장치가 대부분인데 본 연구에서는 수백가지 부품이 PCB 기판에 실장된 초음파 발생 장치와 마이크로컨트롤러가 포함된 전자전자회로를 본질안전인증을 취득하려고 하는 것이므로 매우 어려운 과정이었다. 본 연구를 통해 까다로운 본질안전인증을 대비한 회로 설계를 어떻게 해야 하는지에 대한 방법을 파악할 수 있게 되었으며 향후 본질안전인증을 취득하게 될 경우 본 연구의 결과를 이용하면 보다 용이하게 본질안전 회로를 설계할 수 있게 될 것이다.
Areas of concentrations that can be exploited at all times, such as gas reservoirs in crude oil tanks, are called zero zones. In order to use various equipment in Zone 0, an intrinsically safe certification must be obtained that can guarantee that sparks will not occur in nature. Most devices that acquire intrinsic safety certification are mostly simple single-component devices or devices. In this study, it was a very difficult process because we intend to acquire the intrinsic safety certification of an electronic circuit including an ultrasonic generator and a microcontroller in which hundreds of components are mounted on a PCB substrate. Through this study, we have been able to understand how to design a circuit for intricate intrinsic safety certification. and Using the results of this study, it will be easier to design intrinsically safe circuits when trying to develop a circuit that can obtain intrinsic safety certification.