참고문헌
- B. C. De Cooman, Curr. Opin. Solid. St. M., 8, 285 (2004). https://doi.org/10.1016/j.cossms.2004.10.002
- J. Mahieu, S. Claessens, and B. C. De Cooman, Metall. Mater. Trans. A., 32A, 2905 (2001).
- A. R. Marder, Prog. Mater. Sci., 45, 191 (2000). https://doi.org/10.1016/S0079-6425(98)00006-1
- B. Mintz, Int. Mater. Rev., 46, 169 (2001). https://doi.org/10.1179/095066001771048754
- S. H. Kim, J. Y. Huh, S. K. Lee, R. B. Park, and J. S. Kim, Corros. Sci. Tech., 10, 6 (2011).
- E. M. Bellhouse, A. I. M. Mertens, and J. R. Mcdermid, Mat. Sci. Eng. A., 463, 147 (2007). https://doi.org/10.1016/j.msea.2006.09.117
- Y. Suzuki, T. Yamashita, Y, Sugimoto, S. Fujita, and S. Yamaguchi, ISIJ int., 49, 564 (2009). https://doi.org/10.2355/isijinternational.49.564
- Y. F. Gong, H. S. Kim, and B. C. De Cooman, ISIJ Int., 48, 1745 (2008). https://doi.org/10.2355/isijinternational.48.1745
- Y. F. Gong, H. S. Kim, and B. C. De Cooman, ISIJ Int., 49, 557 (2009). https://doi.org/10.2355/isijinternational.49.557
- T. Van De Putte, D. Loison, J. Penning, and S. Claessens, Metall. Mater. Trans. A., 39, 2875 (2008). https://doi.org/10.1007/s11661-008-9636-9
- X. S. Li, S. I. Baek, C. S. Oh, S. J. Kim, and Y. W. Kim, Scripta. Mater., 57, 113 (2007). https://doi.org/10.1016/j.scriptamat.2007.03.040
- L. Cho, S. J. Lee, M. S. Kim, Y. H. Kim, and B. C. De Cooman, Metall. Mater. Trans. A, 44, 362 (2013). https://doi.org/10.1007/s11661-012-1392-1
- M. Norden, M. Blumenau, T. Wuttke, and K. Peters, Appl. Surf. Sci., 271, 19 (2013). https://doi.org/10.1016/j.apsusc.2012.12.103
- L. Bordignon, X. Vanden Eynde, and R. Fransen, Rev. Metall., 101, 559 (2004). https://doi.org/10.1051/metal:2004124
- W. Schwenk and A. Rahmel, Oxid. Met., 25, 293 (1986). https://doi.org/10.1007/BF01072910
- I. Parezanovic and M. Spiegel, Surf. Eng., 20, 285 (2004). https://doi.org/10.1179/026708404225016517
- T. Adachi and G. H. Meier, Oxid. Met., 27, 347 (1987). https://doi.org/10.1007/BF00659276
- M. Fukumoto, S. Maeda, S. Hayashi, and T. Narita, Oxid. Met., 55, 401 (2001). https://doi.org/10.1023/A:1010353729663
- P. R. S. Jackson and G. R, Wallwork, Oxid. Met., 20, 1 (1983). https://doi.org/10.1007/BF00658124
- A. Atkinson and J. W. Gardner, Corros. Sci., 21, 49 (1981). https://doi.org/10.1016/0010-938X(81)90063-9
- S. Bhagwat, S. N. Yedave, D. M. Phase, S. M. Chaudhari, S. M. Kanetkar, and S. B. Ogale, Phys. Rev. B, 40, 700 (1989). https://doi.org/10.1103/PhysRevB.40.700
- K. Hoshino and N. L. Peterson, J. Phys. Chem. Solids., 46, 1247 (1985). https://doi.org/10.1016/0022-3697(85)90127-1
- S. Hallstrom, L. Hoglund, and J. Agren, Acta. Mater., 59, 53 (2011). https://doi.org/10.1016/j.actamat.2010.08.032
- N. Birks, G. H. Meier, and F. S. Pettit, Introduction to high temperature oxidation of metals, 2nd ed., Cambridge University Press, Cambridge (2006).
피인용 문헌
- Effect of Ni and Cu Addition on Corrosion Behaviors of Pre-Oxidized Ultra-Strong Steel for Automotive Applications vol.57, pp.6, 2019, https://doi.org/10.3365/kjmm.2019.57.6.343
- Wetting Behavior of Zn-Al Liquid on Si-Containing Steel After Surface Oxidation and Reduction Treatment vol.51, pp.2, 2020, https://doi.org/10.1007/s11663-020-01782-3