레이저 빔 시인성 향상을 위한 산란입자가 분산된 Black Matrix

Black Matrix with Scattering Particles for the Enhancement of Visibility of Laser Beam

  • 박준범 (조선대학교 정보통신공학과) ;
  • 신동균 (한국기술교육대학교 전기.전자.통신공학부) ;
  • 한승조 (조선대학교 정보통신공학과) ;
  • 박종운 (한국기술교육대학교 전기.전자.통신공학부)
  • Park, June Buem (Dept. of Information and Communication engineering, Chosun University) ;
  • Shin, Dong-Kyun (School of Electrical & Electronic & Communication Engineering Korea University of Technology and Education) ;
  • Han, Seun Gjo (Dept. of Information and Communication engineering, Chosun University) ;
  • Park, Jong-Woon (School of Electrical & Electronic & Communication Engineering Korea University of Technology and Education)
  • 투고 : 2017.11.27
  • 심사 : 2017.12.21
  • 발행 : 2017.12.31

초록

With an attempt to enhance the visibility of laser beam, we have investigated a black matrix with scattering particles by ray tracing simulations. As the scattering particle density is increased, the detected power by the receiver is increased, thereby enhancing the visibility. In reality, the visibility is reduced with increasing incident angle (away from the normal incidence) of laser beam, a phenomenon also observed by ray tracing simulations. It is due to the fact that the mean path is increased within a highly absorptive BM layer or a smaller number of rays hit the BM area when the incident angle is high. Embedding a number of scattering particles into BM may bring in crosstalk among pixels. However, it is negligible because scattered rays inside highly absorptive BM are re-scattered due to the high scattering particle density, decreasing the power of scattered rays into the active areas.

키워드

참고문헌

  1. M. C. Jung, "Study on Machine Vision Algorithms for LCD Defects Detection," Journal of the Semiconductor & Display Technology, Vol. 9, pp. 59-63, (2010).
  2. J.-H. Lee, D. N. Liu, and S.-T. Wu, Flat panel displays, Wiley, (2008).
  3. J. A. Castellano, Handbook of Display Technology, Academic Press, New York, (1992).
  4. W. D. Boer, Active Matrix Liquid Crystal Display: Fundamentals and Applications, Elsevier, (2005).
  5. T. S. Bui, J. Kim, E. Jung, H. S. Le, N. T. Nguyen, and J.-Y. Bae, "High optical density and low dielectric constant black matrix containing graphene oxide and carbon black on color filters," Displays, Vol. 34, pp. 192-199, (2013). https://doi.org/10.1016/j.displa.2013.03.003
  6. D. J. R. Cristaldi, S. Pennisi, and F. Pulvirenti, Liquid Crystal Display Drivers: Techniques and Circuits, Springer, (2009).
  7. C.-T. Chen and C.-T. Chuang, "Microdroplets of red photoresist inkjet printed onto commercial black matrix glasses," IET Micro & Nano Letts., Vol. 7, pp. 773-735, (2012). http://www.opticalres.com https://doi.org/10.1049/mnl.2012.0354
  8. R. Bathelt, D. Buchhauser, C. Garditz, R. Paetzold and P. Wellmann, "Light extraction from OLEDs for lighting applications through light scattering," Org. Electron., Vol. 8, pp. 293-299, (2007). https://doi.org/10.1016/j.orgel.2006.11.003