OLED Barrier와 Encapsulation을 위한 원자층 증착 Polymer / Al2O3 다층 필름의 온습도 신뢰도 평가 분석

Reliability Evaluation of Atomic layer Deposited Polymer / Al2O3 Multilayer Film for Encapsulation and Barrier of OLEDs in High Humidity and Temperature Environments

  • 투고 : 2017.10.11
  • 심사 : 2017.12.26
  • 발행 : 2017.12.31

초록

Encapsulation of organic based devices is essential issue due to easy deterioration of organic material by water vapor. Atomic layer deposition (ALD) is a promising solution because of its low temperature deposition and quality of the deposited film. Moisture permeation has a mechanism to pass through defects, Thin Film Encapsulation using inorganic / organic / inorganic hybrid film has been used as promising technology. $Al_2O_3$ / Polymer / $Al_2O_3$ multilayer film has shown excellent environmental protection characteristics despite of thin thicknesses of the films.

키워드

참고문헌

  1. S.F. Lim, W. Wang, R. S.J. Chua, "Degradation of organic light-emitting devices due to formation and growth of dark spots," Matl. Sci. andEng.:B 85, 154, (2001).
  2. S., Gardonio, L., Gregoratti, P., Melpignano, L., Aballe, V., Biondo, R., Zamboni, M., Murgia, S., Caria and M., Kiskinova, "Degradation of organic light-emitting diodes under different environment at high drive conditions," Org. Elect. 8, 37, (2007). https://doi.org/10.1016/j.orgel.2006.10.005
  3. L., Ke, S.J., Chua, K., Zhang and N., Yakovlev, "Degradation and failure of organic light-emitting devices," Appl. Phys. Lett. 80, 2195, (2002). https://doi.org/10.1063/1.1464216
  4. A., Yoshida, S., Fujimura, T., Miyake, T., Yoshizawa, H., Ochi, A., Sugimoto, H., Kubota, T., Miyadera, S., Ishizuka, M., Tsuchida, and H., Nakada, "3-Inch Full Color OLED Display Using a Plastic Substrate," Proc. of the Society for Information Display 03, 34, pp. 856-859, (2003).
  5. A. B., Chwang, M. A., Rothman, S. Y., Mao, R. H., Hewitt, M. S., Weaver, J. A., Silvernail, K., Rajan, M., Hack, J. J., Brown, X., Chu, L., Moro, T., Krajewski, and N., Rutherford, "Thin Film Encapsulated Flexible Organic Electroluminescent Displays," Appl. Phys. Lett., vol. 83, no. 3, July, pp. 413-415, (2003). https://doi.org/10.1063/1.1594284
  6. E. G., Lee, "Study on Optimization of the Vacuum Evaporation Process for OLED," Journal of the Semiconductor & Display Equipment Technolohy, Vol. 7, No. 1, March, pp.35-40, (2008).
  7. J., Lewis, "Material challenge for flexible organic devices," Matl. Today. 9, 38, (2006). https://doi.org/10.1016/S1369-7021(06)71446-8
  8. H.S., Chang, "Effects of initial growth mode on the electrical properties of atomic-layer-deposited Hfo2 films," Elect. Matl. Lett 5, pp. 187-190, (2009). https://doi.org/10.3365/eml.2009.12.187
  9. J., Park, Y. Y., Noh, J. W., Huh, J. I., Lee, H., Chu, "Optical and barrier properties of thin-film encapsulations for transparent OLEDs," Organic Electronics., vol. 13, issue. 10, October, pp. 1956-1961, (2012). https://doi.org/10.1016/j.orgel.2012.06.010