DOI QR코드

DOI QR Code

Design optimization of a fixed wing aircraft

  • Yayli, Ugur C. (Department of Mechanical Engineering, Karabuk University) ;
  • Kimet, Cihan (Department of Mechanical Engineering, Karabuk University) ;
  • Duru, Anday (Department of Mechanical Engineering, Karabuk University) ;
  • Cetir, Ozgur (Department of Mechanical Engineering, Karabuk University) ;
  • Torun, Ugur (Department of Mechanical Engineering, Karabuk University) ;
  • Aydogan, Ahmet C. (Department of Mechanical Engineering, Karabuk University) ;
  • Padmanaban, Sanjeevikumar (Ohm Technologies, Research and Development) ;
  • Ertas, Ahmet H. (Department of Biomedical Engineering, Karabuk University)
  • 투고 : 2016.06.06
  • 심사 : 2016.09.19
  • 발행 : 2017.01.25

초록

Small aircrafts, Unmanned Aerial Vehicles (UAVs), are used especially for military purposes. Because landing fields are limited in rural and hilly places, take-off or landing distances are very important. In order to achieve a short landing or take-off distance many parameters have to be considered, for instance the design of aircrafts. Hence this paper represents a better design to enlarge the use of fixed wing aircrafts. The document is based on a live and simulated experiments. The various components of designed aircraft are enhanced to create short take-off distance, greater lift and airflow without the need for proper runway area. Therefore, created aerodynamics of the remotely piloted aircraft made it possible to use fixed wing aircrafts in rural areas.

키워드

과제정보

연구 과제번호 : Karabuk University-Coordinator of Research Projects (BAP)

참고문헌

  1. AIAA Student Design/Build/Fly Competition. (n.d.), Retrieved February 10, 2016, from http://www.aiaadbf.org/
  2. Ajaj, R.M., Friswell, M.I., Flores, E.I., Keane, A., Isikveren, A.T., Allegri, G. and Adhikari, S. (2013), "An integrated conceptual design study using span morphing technology", J. Intel. Mater. Syst. Struct., 25(8), 989-1008. https://doi.org/10.1177/1045389X13502869
  3. ANSYS/ED (1997), Upper Saddle River, NJ: Prentice Hall.
  4. Arifianto, O. and Farhood, M. (2015), "Optimal control of a small fixed-wing UAV about concatenated trajectories", Control. Eng. Pract., 40, 113-132. https://doi.org/10.1016/j.conengprac.2015.03.007
  5. Chen, Z., Wang, C., Wen, C., Teng, X., Chen, Y., Guan, H. and Li, J. (2016), "Vehicle detection in highresolution aerial images via sparse representation and superpixels", IEEE Tran. Geosci. Remote Sens., 54(1), 103-116. https://doi.org/10.1109/TGRS.2015.2451002
  6. Chi, T., Cheng, H., Page, J. and Ahmed, N. (2014), "Evolving swarm of UAVs", Adv. Aircraft Spacecraft Sci., 1(2), 219-232. https://doi.org/10.12989/aas.2014.1.2.219
  7. Dinesh, M., Kenny, M.V., Dharni, V.V., Santhosh, K.B., Sree, R.R. and Kumar, V.R.S. (2014), "Diagnostic investigation of aircraft performance at different winglet cant angles", World Acad. Sci. Eng. Technol., 8(12), 2028-2037.
  8. Eken, S. and Kaya, M.O. (2015), "The effect of sweep angle on the limit cycle oscillations of aircraft wings", Adv. Aircraft Spacecraft Sci., 2(2), 199-215. https://doi.org/10.12989/aas.2015.2.2.199
  9. Fahlstrom, P.G. and Gleason, T.J. (2012), Introduction to UAV systems, John Wiley & Sons, Chichester, West Sussex.
  10. Farsani, R. and Fazaeli, R. (2012), "Applications of carbon fibers produced from polyacrylonitrile fibers", Int. J. Chem. Molec. Nucl. Mater. Metal. Eng., 6(8), 836-839.
  11. Gonzalez-Espasandin, O, Leo, T.J. and Navarro-Arevalo, E. (2014), "Fuel cells: a real option for unmanned aerial vehicles propulsion", Scientif. World J., 1, 1-12.
  12. Jackson, S.P. (2011), "Controlling small fixed wing UAVs to optimize image quality from on-board cameras", PhD Thesis, University of California, Berkley, U.S.A.
  13. Jin, W. and Lee, Y. (2015), "Drag reduction design for a long-endurance electric powered UAV", Int. J. Aeronaut. Space Sci., 16(2), 311-324. https://doi.org/10.5139/IJASS.2015.16.2.311
  14. Khardi, S. (2014), "Optimization of aircraft fuel consumption and reduction of pollutant emissions. Environmental impact assessment", Adv. Aircraft Spacecraft Sci., 1(3), 311-330. https://doi.org/10.12989/aas.2014.1.3.311
  15. Li, J.Y. and Yang, Z.B. (2013), "Fatigue analysis for the aircraft landing gear connecting parts", AMM Appl. Mech. Mater., 300-301, 870-873. https://doi.org/10.4028/www.scientific.net/AMM.300-301.870
  16. Linchant, J., Lisein, J., Semeki, J., Lejeune, P. and Vermeulen, C. (2015), "Are unmanned aircraft systems (UASs) the future of wildlife monitoring? A review of accomplishments and challenges", Mammal Rev., 45(4), 239-252. https://doi.org/10.1111/mam.12046
  17. Liu, P., Chen, A.Y., Huang, Y., Han, J., Lai, J., Kang, S. and Tsai, M. (2014), "Review of rotorcraft unmanned aerial vehicle (UAV) developments and applications in civil engineering", Smart Struct. Syst., 13(6), 1065-1094. https://doi.org/10.12989/sss.2014.13.6.1065
  18. Ma, W.Y., Sun, H., Liu, B. and Jia, H.G. (2013), "Analysis of UAV main landing gear loads during wheel spin-up process", AMR Adv. Mater. Res., 753-755, 1595-1598. https://doi.org/10.4028/www.scientific.net/AMR.753-755.1595
  19. Miller, F.P., Vandome, A.F. and McBrewster, J. (2010), Ground effect in aircraft, Alphascript Publishing, Lexington, KY.
  20. MotoCalc 8, Computer software. MotoCalc, Capable Computing, Inc., n.d.
  21. Nedjati, A., Vizvari, B. and Izbirak, G. (2015), "Post-earthquake response by small UAV helicopters", Nat. Hazard., 80(3), 1669-1688.
  22. Nishar, A., Richards, S., Breen, D., Robertson, J. and Breen, B. (2016), "Thermal infrared imaging of geothermal environments and by an unmanned aerial vehicle (UAV): A case study of the Wairakei-Tauhara geothermal field, Taupo, New Zealand", Renew. Energy, 86, 1256-1264. https://doi.org/10.1016/j.renene.2015.09.042
  23. Palma, L.D., Paletta, N. and Pecora, M. (2009), "Aeroelastic design of a joined-wing UAV", SAE Technical Paper Series, 2009-01-3150.
  24. Petrolo, M., Carrera, E., D'ottavio, M., Visser, C.D., Patek, Z., and Janda, Z. (2014), "On the Development of the Anuloid, a Disk-Shaped VTOL Aircraft for Urban Areas", Advances in Aircraft and Spacecraft Science, 1(3), 353-378. https://doi.org/10.12989/aas.2014.1.3.353
  25. Raymer, D. P. (1999), Aircraft design: A conceptual approach. Reston, VA: American Institute of Aeronautics and Astronautics.
  26. Schibani, A., Festa, B., D'Apuzzo, M. and Nicolosi, V. (2014), "Some remarks on landing kinematic characteristics of aircrafts", Sustainability, Eco-efficiency, and Conservation in Transportation Infrastructure Asset Management, 385-392.
  27. Stinton, D. (2001), The design of the aeroplane, Blackwell Science, Malden, MA.
  28. Sun, X., Chen, W., Patterson, B.C., Florence, D.E., Fischer, R.L., Jones, M. and Adams, J. (2007), "An advanced airborne multisensor imaging system for fast mapping and change detection applications", Proceedings of 2007 IEEE International Geoscience and Remote Sensing Symposium, Barsalona, Spain, Jululy.
  29. Warsi, F.A., Hazry, D., Ahmed, S.F., Joyo, M.K., Tanveer, M.H., Kamarudin, H. and Razlan, Z.M. (2014), "Yaw, pitch and roll controller design for fixed-wing UAV under uncertainty and perturbed condition", IEEE 10th International Colloquium on Signal Processing & its Applications (CSPA2014), Kuala Lumpur, March.
  30. Yildiz, K., Eken, S. and Kaya, M.O. (2015), "Optimal control procedure application for dynamic response of adaptive aircraft wings modeled as thin-walled composite beams", Appl. Mech. Mater., 798, 292-296. https://doi.org/10.4028/www.scientific.net/AMM.798.292
  31. Zhang, C., Zhen, Z.Y., Wang, D.B. and Meng, X.Y. (2010), "Optimal control for thrust vectoring unmanned aerial vehicle", International Conference on Advanced Measurement and Test, Sanya, China, May.

피인용 문헌

  1. Geometrical parameters optimizations of scarf and double scarf bounded joint vol.5, pp.3, 2017, https://doi.org/10.12989/aas.2018.5.3.401
  2. Design Criteria for Variable Camber Compliant Wing Aircraft Morphing Wing Skin vol.58, pp.2, 2020, https://doi.org/10.2514/1.j058002
  3. Development of the mathematical model for the tilt-rotor aircraft vol.1925, pp.1, 2017, https://doi.org/10.1088/1742-6596/1925/1/012041