Advances in aircraft and spacecraft science

  • 제4권1호
  • /
  • Pages.1-19
  • /
  • 2017
  • /
  • 2287-528X(pISSN)
  • /
  • 2287-5271(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

A methodology for assessing fatigue life of a countersunk riveted lap joint

  • Li, Gang (Aerospace, National Research Council) ;
  • Renaud, Guillaume (Aerospace, National Research Council) ;
  • Liao, Min (Aerospace, National Research Council) ;
  • Okada, Takao (Aeronautical Technology Directorate, Japan Aerospace Exploration Agency) ;
  • Machida, Shigeru (Aeronautical Technology Directorate, Japan Aerospace Exploration Agency)
  • 투고 : 2015.11.07
  • 심사 : 2016.01.07
  • 발행 : 2017.01.25
⟨ 이전 논문 다음 논문 ⟩

초록

Fatigue life prediction of a multi-row countersunk riveted lap joint was performed numerically. The stress and strain conditions in a highly stressed substructure of the joint were analysed using a global/local finite element (FE) model coupling approach. After validation of the FE models using experimental strain measurements, the stress/strain condition in the local three-dimensional (3D) FE model was simulated under a fatigue loading condition. This local model involved multiple load cases with nonlinearity in material properties, geometric deformation, and contact boundary conditions. The resulting stresses and strains were used in the Smith-Watson-Topper (SWT) strain life equation to assess the fatigue "initiation life", defined as the life to a 0.5 mm deep crack. Effects of the rivet-hole clearance and rivet head deformation on the predicted fatigue life were identified, and good agreement in the fatigue life was obtained between the experimental and the numerical results. Further crack growth from a 0.5 mm crack to the first linkup of two adjacent cracks was evaluated using the NRC in-house tool, CanGROW. Good correlation in the fatigue life was also obtained between the experimental result and the crack growth analysis. The study shows that the selected methodology is promising for assessing the fatigue life for the lap joint, which is expected to improve research efficiency by reducing test quantity and cost.

키워드

과제정보

연구 과제 주관 기관 : NRC, JAXA, Department of National Defence (DND) Canada

참고문헌

  1. Anderson, B.L., Hsu, C., Carr, P.J., Lo, J.G., Yu, J. and Duong, C.N. (2004), "Evaluation and verification of advanced methods to assess multiple-site damage of aircraft structures", DOT/FAA/AR-04/42,I, U.S. Department of Transportation, Federal Aviation Administration.
  2. Boller, C. and Seeger, T. (1987), Materials Data for Cyclic loading, Part D: Aluminium and Titanium Alloys. Elsevier Science Publishers, Amsterdam, The Netherlands.
  3. Bombardier, Y., Liao, M. and Renaud, G. (2010), "A new crack growth analysis tool for the assessment of multiple site fatigue damage", Proceedings of Aircraft Airworthiness & Sustainment Conference 2010 (AA&S2010), Austin, TX, USA.
  4. Eastaugh, G.F., Straznicky, P.V., Krizan, D., Merati, A.A. and Cook, J. (2000), "Experimental study of the effects of corrosion on the fatigue durability and crack growth characteristics of longitudinal fuselage splices", Proceedings of the Fourth DoD/FAA/NASA Aging Aircraft Conference, St. Louis, USA.
  5. Grandt, Jr. A.F.G., Farris, T.N. and Hillberry, B.H. (1999), "Analysis of widespread fatigue damage in aerospace structures", Final report for US Air Force of Scientific Research, Grant number F49620-98-1-0293.
  6. Harter, J.A. (2008), "AFGROW users guide and technical manual, AFGROW for windows XP/VISTA, Version 4.0012.15", AFRL-VA-WP-TR-2008-XXXX, Air Vehicles Directorate, Air Force Research Laboratory, Wright-Patterson AFB, OH.
  7. Huang, W., Wang, T.J., Garbatov, Y. and Soares, C.G. (2012), "Fatigue reliability assessment of riveted lap joint of aircraft structures", Int. J Fatigue, 43(10), 54-61. https://doi.org/10.1016/j.ijfatigue.2012.02.005
  8. Li G., Renaud, G. and Liao M. (2014), "Life prediction for a riveted flat panel joint using global/local FE modelling", NRC Report, LTR-SMM-2014-0096, 2014.
  9. Li, G. and Shi, G. (2004), "Effect of the riveting process on the residual stress in fuselage lap joints", Can. Aeronaut. Space J., 50(2), 91-105. https://doi.org/10.5589/q04-007
  10. Li, G., Shi, G. and Bellinger, N.C. (2007), "Residual stress/strain in three-row countersunk riveted lap joints", J. Aircraft, 44(4), 1275-1285. https://doi.org/10.2514/1.26748
  11. Li, G., Shi, G. and Bellinger, N.C. (2011), "Stress condition in triple-row riveted lap joints under the influence of specific factors", J. Aircraft, 48(2), 527-539. https://doi.org/10.2514/1.C031129
  12. Li, G., Shi, G. and Bellinger, N.C. (2012), Chapter 6: "Assessing the riveting process and the quality of riveted joints in aerospace and other applications", Welding and joining of aerospace materials, Ed. M.C. Chaturvedi, Woodhead Publishing Limited, Cambridge, UK.
  13. Liao, M., Bombardier, Y., Renaud, G. and Bellinger, N.C. (2010), "Advanced damage tolerance and risk assessment methodologies and tools for aircraft structures containing multiple-site and multiple-element fatigue damage", J. Aerospace Eng., 226(11), 2010.
  14. Liao, M., Shi, G. and Xiong, Y. (2001), "Prediction of fatigue life distribution of fuselage splices", Int. J. Fatigue, 23, S177-185. https://doi.org/10.1016/S0142-1123(01)00127-X
  15. MSC/Patran, Global/local model using FEM Fields, PATRAN 302 Exercise workbook-release 8.0, 19-122. http://web.mscsoftware.com/support/online_ex/previous_Patran/Pat302/Exercise_19_FEM_Global_Local.pdf, cited on Dec. 2014.
  16. Müller, R.P.G. (1995), "An experimental and analytical investigation on the fatigue Behaviour of fuselage riveted lap joints: The significance of the rivet squeeze force and a comparison of 2024-T3 and glare 3", Ph.D. Dissertation, Delft University of Technology.
  17. Newman, Jr. J.C. and Ramakrishnan, R. (2016), "Fatigue and crack-growth analyses of riveted lap-joints in a retired aircraft", Int. J Fatigue, 82, 342-349. https://doi.org/10.1016/j.ijfatigue.2015.04.010
  18. Silva, L.F.M., Goncalves, J.P.M., Oliverira, F.M.F. and de Castro, P.M.S.T. (2000), "Multiple-site damage in riveted lap-joints: experimental simulation and finite element prediction", Int. J. Fatigue, 22(4), 319-338. https://doi.org/10.1016/S0142-1123(99)00129-2
  19. Skorupa, A. and Skorupa, M. (2012), Riveted Lap Joints in Aircraft Fuselage: Design, Analysis and Properties, Springer.
  20. Smith, K.N., Watson, P. and Topper, T.H. (1970), "A stress-strain function for the fatigue of metals", J. Mater., 5, 767-778.
  21. Szolwinski, M.P. and Farris, T.N. (2000), "Linking riveting process parameters to the fatigue performance of riveted aircraft structures", J. Aircraft., 37(1), 130-137. https://doi.org/10.2514/2.2572
  22. Trego, A. and Cope, D. (2001), "Evaluation of damage tolerance analysis tools for lap joints", AIAA J., 39(12), 2250-2254. https://doi.org/10.2514/2.1256

피인용 문헌

  1. Global-local fatigue assessment of an ancient riveted metallic bridge based on submodelling of the critical detail pp.8756758X, 2019, https://doi.org/10.1111/ffe.12930
  2. Fatigue performance and life prediction methods research on steel tube-welded hollow spherical joint vol.36, pp.1, 2017, https://doi.org/10.12989/scs.2020.36.1.075
  3. Clamped member fatigue characteristics of bolted connections subject to OUT‐OF‐PLANE loading vol.3, pp.10, 2017, https://doi.org/10.1002/eng2.12408