Earthquakes and Structures

  • 제13권6호
  • /
  • Pages.551-559
  • /
  • 2017
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Effects of friction variability on a rolling-damper-spring isolation system

  • Wei, Biao (School of Civil Engineering, Central South University) ;
  • Wang, Peng (School of Civil Engineering, Central South University) ;
  • He, Xuhui (School of Civil Engineering, Central South University) ;
  • Zhang, Zhen (School of Civil Engineering, Central South University) ;
  • Chen, Liang (School of Civil Engineering, Hefei University of Technology)
  • 투고 : 2016.06.02
  • 심사 : 2018.01.16
  • 발행 : 2017.12.25
⟨ 이전 논문 다음 논문 ⟩

초록

A large number of isolation systems are designed without considering the non-uniform friction distribution in space. In order to analyze the effects of non-uniform friction distribution on the structural response of isolation system, this paper presented a simplified rolling-damper-spring isolation system and analyzed the structural responses under earthquakes. The numerical results indicate that the calculation errors related to the peak values of structural acceleration, relative displacement and residual displacement are sequentially growing because of the ignorance of non-uniform friction distribution. However, the influence rule may be weakened by the spring and damper actions, and the unreasonable spring constant may lead to the sympathetic vibration of isolation system. In the case when the friction variability is large and the damper action is little, the non-uniform friction distribution should be taken into consideration during the calculation process of the peak values of structural acceleration and relative displacement. The non-uniform friction distribution should be taken into full consideration regardless of friction variability degree in calculating the residual displacement of isolation system.

키워드

과제정보

연구 과제 주관 기관 : Natural Science Foundations of Hunan Province, Central South University

참고문헌

  1. Antonyuk, E.Y. and Plakhtienko, N.P. (2004), "Dynamic modes of one seismic-damping mechanism with frictiona bonds", Int. Appl. Mech., 40(6), 702-708. https://doi.org/10.1023/B:INAM.0000041399.99257.b3
  2. Begley, C.J. and Virgin, L.N. (1998), "Impact response and the influence of friction", J. Sound Vib., 211(5), 801-818. https://doi.org/10.1006/jsvi.1997.1389
  3. Chung, L.L., Kao, P.S., Yang, C.Y., Wu, L.Y. and Chen, H.M. (2015), "Optimal frictional coefficient of structural isolation system", J. Vib. Control, 21(3), 525-538. https://doi.org/10.1177/1077546313487938
  4. Cui, S. (2012), Integrated Design Methodology for Isolated Floor Systems in Single-Degree-of-Freedom Structural Fuse Systems, State University of New York, Buffalo.
  5. Fahjan, Y. and Ozdemir, Z. (2008), "Scaling of earthquake accelerograms for non-linear dynamic analysis to match the earthquake design spectra", The 14th World Conference on Earthquake Engineering, Chinese Society for Earthquake Engineering, Beijing, China.
  6. Flom, D.G. and Bueche, A.M. (1959), "Theory of rolling friction for spheres", J. Appl. Phys., 30(11), 1725-1730. https://doi.org/10.1063/1.1735043
  7. Guerreiro, L., Azevedo, J. and Muhr, A.H. (2007), "Seismic tests and numerical modeling of a rolling-ball isolation system", J. Earthq. Eng., 11(1), 49-66. https://doi.org/10.1080/13632460601123172
  8. Harvey, P.S. and Gavin, H.P. (2013), "The nonholonomic and chaotic nature of a rolling isolation system", J. Sound Vib., 332(14), 3535-3551. https://doi.org/10.1016/j.jsv.2013.01.036
  9. Harvey, P.S. and Gavin, H.P. (2014), "Double rolling isolation systems: a mathematical model and experimental validation", Int. J. Nonlin. Mech., 61(1), 80-92. https://doi.org/10.1016/j.ijnonlinmec.2014.01.011
  10. Harvey, P.S. and Gavin, H.P. (2015), "Assessment of a rolling isolation system using reduced order structural models", Eng. Struct., 99, 708-725. https://doi.org/10.1016/j.engstruct.2015.05.022
  11. Harvey, P.S., Wiebe, R. and Gavin, H.P. (2013), "On the chaotic response of a nonlinear rolling isolation system", Physica D: Nonlin. Phenomena, 256-257, 36-42. https://doi.org/10.1016/j.physd.2013.04.013
  12. Harvey, P.S., Zehil, G.P. and Gavin, H.P. (2014), "Experimental validation of a simplified model for rolling isolation systems", Earthq. Eng. Struct. Dyn., 43(7), 1067-1088. https://doi.org/10.1002/eqe.2387
  13. Ismail, M. (2015), "An isolation system for limited seismic gaps in near-fault zones", Earthq. Eng. Struct. Dyn., 44(7), 1115-1137. https://doi.org/10.1002/eqe.2504
  14. Ismail, M. and Casas, J.R. (2014), "Novel isolation device for protection of cable-stayed bridges against near-fault earthquakes", J. Bridge Eng., 19(8), 50-65.
  15. Ismail, M., Rodellar, J. and Pozo, F. (2014), "An isolation device for near-fault ground motions", Struct. Control Hlth. Monit., 21(3), 249-268. https://doi.org/10.1002/stc.1549
  16. Ismail, M., Rodellar, J. and Pozo, F. (2015), "Passive and hybrid mitigation of potential near-fault inner pounding of a self-braking seismic isolator", Soil Dyn. Earthq. Eng., 69(2), 233-250. https://doi.org/10.1016/j.soildyn.2014.10.019
  17. Jangid, R.S. (2000), "Stochastic seismic response of structures isolated by rolling rods", Eng. Struct., 22(8), 937-946. https://doi.org/10.1016/S0141-0296(99)00041-3
  18. Jangid, R.S. and Londhe, Y.B. (1998), "Effectiveness of elliptical rolling rods for base isolation", J. Struct. Eng., 124(4), 469-472. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:4(469)
  19. Jiang, C.W., Wei, B., Wang, D.B., Jiang, L.Z. and He, X.H. (2017), "Seismic vulnerability evaluation of a three-span continuous beam railway bridge", Math. Prob. Eng., 4, 1-13.
  20. JTJ004-89, Standard of the Ministry of Communications of P.R. China (1989), Specifications of Earthquake Resistant Design for Highway Engineering, China Communications Press, Beijing (in Chinese).
  21. Kosntantinidis, D. and Makris, N. (2009), "Experimental and analytical studies on the response of freestanding laboratory equipment to earthquake shaking", Earthq. Eng. Struct. Dyn., 38(6), 827-848. https://doi.org/10.1002/eqe.871
  22. Kurita, K., Aoki, S., Nakanishi, Y., Tominaga, K. and Kanazawa, M. (2011), "Fundamental characteristics of reduction system for seismic response using friction force", J. Civil Eng. Arch., 5(11), 1042-1047.
  23. Lee, G.C., Ou, Y.C., Niu, T.C., Song, J.W. and Liang, Z. (2010), "Characterization of a roller seismic isolation bearing with supplemental energy dissipation for highway bridges", J. Struct. Eng., 136(5), 502-510. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000136
  24. Lewis, A.D. and Murray, R.M. (1995), "Variational principles for constrained systems: Theory and experiment", Int. J. Nonlin. Mech., 30(6), 793-815. https://doi.org/10.1016/0020-7462(95)00024-0
  25. Nanda, R.P., Agarwal, P. and Shrikhande, M. (2012), "Base isolation system suitable for masonry buildings", Asian J. Civil Eng. (Build. Hous.), 13(2), 195-202.
  26. Ortiz, N.A., Magluta, C. and Roitman, N. (2015), "Numerical and experimental studies of a building with roller seismic isolation bearings", Struct. Eng. Mech., 54(3), 475-489. https://doi.org/10.12989/sem.2015.54.3.475
  27. Ou, Y.C., Song, J.W. and Lee, G.C. (2010), "A parametric study of seismic behavior of roller seismic isolation bearings for highway bridges", Earthq. Eng. Struct. Dyn., 39(5), 541-559. https://doi.org/10.1002/eqe.958
  28. Siringoringo, D.M. and Fujino, Y. (2015), "Seismic response analyses of an asymmetric base-isolated building during the 2011 Great East Japan (Tohoku) Earthquake", Struct. Control Hlth. Monit., 22(1), 71-90. https://doi.org/10.1002/stc.1661
  29. Tsai, C.S., Lin, Y.C., Chen, W.S. and Su, H.C. (2010), "Tri-directional shaking table tests of vibration sensitive equipment with static dynamics interchangeable-ball pendulum system", Earthq. Eng. Eng. Vib., 9(1), 103-112. https://doi.org/10.1007/s11803-010-9009-4
  30. Wang, S.J., Hwang, J.S., Chang, K.C., Shiau, C.Y., Lin, W.C., Tsai, M.S., Hong, J.X. and Yang, Y.H. (2014), "Sloped multi-roller isolation devices for seismic protection of equipment and facilities", Earthq. Eng. Struct. Dyn., 43(10), 1443-1461. https://doi.org/10.1002/eqe.2404
  31. Wang, Y.J., Wei, Q.C., Shi, J. and Long, X.Y. (2010), "Resonance characteristics of two-span continuous beam under moving high speed trains", Latin Am. J. Solid. Struct., 7(2), 185-199. https://doi.org/10.1590/S1679-78252010000200005
  32. Wei, B., Cui, R.B. and Dai, G.L. (2013), "Seismic performance of a rolling-damper isolation system", J. Vibroeng., 15(3), 1504-1512.
  33. Wei, B., Dai, G.L., Wen, Y. and Xia, Y. (2014), "Seismic performance of an isolation system of rolling friction with spring", J. Central South Univ., 21(4), 1518-1525. https://doi.org/10.1007/s11771-014-2092-3
  34. Wei, B., Wang, P., He, X.H. and Jiang, L.Z. (2016), "Seismic isolation characteristics of a friction system", J. Test. Eval., DOI: 10.1520/JTE20160598.
  35. Wei, B., Wang, P., He, X.H. and Jiang, L.Z. (2018), "The impact of the convex friction distribution on the seismic response of a spring-friction isolation system", KSCE J. Civil Eng., 22(4), DOI: 10.1007/s12205-017-0938-6.
  36. Wei, B., Wang, P., Liu, W.A., Yang, M.G. and Jiang, L.Z. (2016), "The impact of the concave distribution of rolling friction coefficient on the seismic isolation performance of a spring-rolling system", Int. J. Nonlin. Mech., 83, 65-77. https://doi.org/10.1016/j.ijnonlinmec.2016.04.001
  37. Wei, B., Wang, P., Yang, M.G. and Jiang, L.Z. (2017), "Seismic response of rolling isolation systems with concave friction distribution", J. Earthq. Eng., 21(3), 325-342. https://doi.org/10.1080/13632469.2016.1157530
  38. Wei, B., Xia, Y. and Liu, W.A. (2014), "Lateral vibration analysis of continuous bridges utilizing equal displacement rule", Latin Am. J. Solid. Struct., 11(1), 75-91. https://doi.org/10.1590/S1679-78252014000100005
  39. Wei, B., Yang, T.H. and Jiang, L.Z. (2015), "Influence of friction variability on isolation performance of a rolling-damper isolation system", J. Vibroeng., 17(2), 792-801.
  40. Wei, B., Yang, T.H., Jiang, L.Z. and He X.H. (2017), "Effects of friction-based fixed bearings on the seismic vulnerability of a high-speed railway continuous bridge", Adv. Struct. Eng., DOI: 10.1177/1369433217726894.
  41. Wei, B., Zuo C.J., He, X.H. and Jiang, L.Z. (2018), "Numerical investigation on scaling a pure friction isolation system for civil structures in shaking table model tests", Int. J. Nonlin. Mech., 98, 1-12. https://doi.org/10.1016/j.ijnonlinmec.2017.09.005
  42. Yim, C.S., Chopra, A.K. and Penzien, J. (1980), "Rocking response of rigid blocks to earthquakes", Earthq. Eng. Struct. Dyn., 8(6), 565-587. https://doi.org/10.1002/eqe.4290080606
  43. Yin, C.F. and Wei, B. (2013), "Numerical simulation of a bridge-subgrade transition zone due to moving vehicle in Shuohuang heavy haul railway", J. Vibroeng., 15(2), 1062-1068.

피인용 문헌

  1. Early adjusting damping force for sloped rolling-type seismic isolators based on earthquake early warning information vol.20, pp.1, 2017, https://doi.org/10.12989/eas.2021.20.1.039