Journal of the Society of Disaster Information (한국재난정보학회 논문집)

The Korean Society of Disaster Information (한국재난정보학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Rutting Prediction Model of Flexible Pavement using Repetitive Axial Loading Test

반복 축하중 시험을 이용한 연성포장의 소성변형 예측모델 개발

  • Kim, Nakseok (Department of Civil Engineering, University of Kyonggi)
  • Received : 2017.09.26
  • Accepted : 2017.12.11
  • Published : 2017.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The primary objective of this research is to develop a rutting performance prediction model of flexible pavement. Extensive laboratory testings were conducted to achieve the objective. A new test method employing repetitive axial loading with confinement was also adopted to estimate the rutting performance of asphalt concrete in the research. The rutting prediction model employes a layer-strain theory. The required rutting coefficients for the prediction model were determined through the laboratory rutting characterizations of the asphalt concrete layer materials. Within the limits of this study, a laboratory rutting prediction model of flexible pavement using repetitive axial loading test was presented. It is noted that the developed rutting prediction model simulates propery the behaviors of flexible pavement layer materials.

본 연구의 주 목적은 연성 도로포장의 소성변형 예측모델을 개발하는 것이다. 목적을 수행하기 위하여 다양한 실험실 시험이 수행되었다. 소성변형 량을 측정하기 위하여 측면 구속압을 제공하는 새로운 반복 일축압축시험이 채택되었으며 소성변형 예측모델은 층별-변형률 이론이 적용되었다. 예측모델의 소성계수는 아스팔트 콘크리트 재료의 소성변형시험을 통하여 결정되었다. 본 연구가 수행된 범위내에서 반복 일축압축시험을 통한 연성포장의 소성변형 예측모델이 제안되었다. 제안된 소성변형 예측모델은 연성포장 층 재료의 거동을 적절하게 모사하는 것으로 나타났다.

Keywords

References

  1. Harvey, J. T. (1990). "Asphalt Concrete Specimen Preparation Protocol SHRP Project A-003A", Strategic Highway Research Program, Technical Memorandum 90-4 Prepared for SHRP Project A-003A, Asphalt Research Program, Institute of Transportation Studies, University of California, Berkeley, US.
  2. Kim, N. (1991). "Effect of Temperature and Mixture Variables on Fatigue and Permanent Deformation of Asphalt Concrete", Master Thesis, North Carolina State University, US.
  3. Kim, Y.R., Khosla, N.P., Kim, N. (1992). "Effect of Aggregate Type and Gradation on Fatigue and Permanent Deformation of Asphalt Concrete", Proceedings of a Symposium, Effects of Aggregates and Mineral Fillers on Asphalt Mixture Performance, ASTM Publication STP 1147, American Society for Testing and Materials, 1992, pp. 310-328, US.
  4. Kim, N. (1994). "Development of Performance Prediction Models for Asphalt Concrete Layers", Ph. D. Dissertation of North Carolina State University, US.
  5. Kim, N. (2014). "Development of Practical Rutting Characterization Method for Bituminous Mixtures", Journal of the Korea Society of Disaster Information(KSDI), Vol. 10, No. 1, pp. 25-32 https://doi.org/10.15683/kosd.2014.10.1.025
  6. Little, D.N., Button, J.W., Youssef, H. (1993). "Development of Criteria to Evaluate Uniaxial Creep Data and Asphalt Concrete Permanent Deformation Potential", Published in 1992 Annual Meeting of the Transportation Research Board, US.
  7. Monismith, C.L., Tayebali, A.A. (1988). "Permanent Deformation (Rutting) Considerations in Asphalt Concrete Pavement Sections", Proceedings, Association of Asphalt Paving Technologists, Vol. 57m, US.
  8. Sousa, J.B. and Craus, J. (1990). "Summary Report on Permanent Deformation in Asphalt Concrete", Institute of Transportation Studies, University of California, Berkeley, US.