Acknowledgement
Supported by : 창원대학교
References
- Lee, U. M., Kim, N. K. and Kim, H. J., "A Study on the High Speed Machining of Major Structure in Aircraft," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 119-124, 2012.
- Kim, G. H., "A Study on Characteristics of Cutting by Cutting Conditions in Titanium Machining," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 1, pp. 84-89, 2013. https://doi.org/10.14775/ksmpe.2013.12.6.084
- Kim, D. H., Park, K. B., Cho, Y. T. and Jung, Y. G., "A Study on Improved Drill Shape for Efficient Drilling of Inconel 718 Using the Design of Experiment," Journal of the Korean Society for Precision Engineering, Vol. 34, No. 3, pp. 161-166, 2017. https://doi.org/10.7736/KSPE.2017.34.3.161
- Park, J. M., Choi, W. S., Kwon, S. H. and Cha, J. H., "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 48-53, 2009.
- Kline, W. A., Devor, R. E. and Lindberg, J. R., "The Prediction of Cutting Forces in End Milling with Application to Cornering Cuts," International Journal of Machine Tool Design and Research, Vol. 22, No. 1 pp. 7-22, 1982. https://doi.org/10.1016/0020-7357(82)90016-6
- Kline, W. A. and Devor, R. E., "The Effect of Run Out on Cutting Geometry and Forces in End Milling," International Journal of Machine Tool Design and Research, Vol. 23, No. 2/3, pp. 123-140. 1983. https://doi.org/10.1016/0020-7357(83)90012-4
- Jung, S. C. and Kim, K. W., "Prediction of Cutting Forces in High Speed End Milling," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 4, No. 4, pp. 21-27, 2015.
- Lee, S. H., "A Study on the Productivity Improvement of Aircraft Parts Using AdvantEdge PM," Graduate School of Industry, Changwon National University, Master's degree paper, 2017.