References
- S. Kumar, P. Kumar and H.S. Shan, J. Mater. Process. Tech., "Optimization of tensile properties of evaporative pattern casting process through Taguchi's method", 204 (2008) 59-69. https://doi.org/10.1016/j.jmatprotec.2007.10.075
- S. Saghi, M. Divandari and Y.H.K. Kharrazi, Iranian J. Mater. Sci. Eng., "Flow behavior of molten metal in aluminum LFC process", 1 (2004) 39-46.
- Kim JM, Ha TH and Choe KH, J. Korea Foundry Society, "Mechanical properties and mold filling capability of Al-Si-Mg casting alloy fabricated by lost foam casting process", 36 (2016) 153-158. https://doi.org/10.7777/jkfs.2016.36.5.153
- F. Sonnernberg, AFS Technical Publication, Lost foam casting made simple, American Foundry Society, Schaumburg, IL, USA (2008) 41-57, 173-200.
- K. Siavashi, Ph.D. Thesis, Univ. of Birmingham, The effect of casting parameters on the fluidity and porosity of aluminum alloys in the lost foam casting process, (2011).
- K.R. Ravi. R.M. Pillai, K.R. Amaranathan, B.C. Pai and M. Chakraborty, J. Alloys Compd., "Fluidity of aluminum alloys and composite: a review", 456 (2008) 201-201. https://doi.org/10.1016/j.jallcom.2007.02.038
- E.N. Pan and K.Y. Liao, AFS Trans., "Study on flowability of EPC A356 Al alloys", 106 (1998) 233-242.
- L. Trumbulovic, Z. Acimovic, Z. Gulisija and L. Andric, Mater. Letters, "Correlation of technological parameters and quality of castings obtained by the EPC method", 58 (2004) 1726-1731. https://doi.org/10.1016/j.matlet.2003.09.057
- H. Jafari, M.H. Idris and A. Shayganpour, Trans. Nonferrous Met. Soc. China, "Evaluation of significant manufacturing parameters in lost foam casting of thin-wall Al-Si-Cu alloy using full factorial design of experiment", 23 (2013) 2843-2851. https://doi.org/10.1016/S1003-6326(13)62805-8
- W. Abdul-Karem and K.F. Al-Raheem, Int. J. Eng. Sci. Tech., "Vibration improved the fluidity of aluminum alloys in thin wall investment casting", 3 (2011) 120-135.
- M.D. Sabatino and L. Arnberg, Int. J. Cast Met. Res., "Effect of grain refinement and dissolved hydrogen on the fluidity of A356 alloy", 18 (2005) 181-186. https://doi.org/10.1179/136404605225022982
- Kwon YD and Lee ZH, Mater. Sci. Eng. A, "The effect of grain refining and oxide inclusion on the fluidity of Al-4.5Cu-0.6Mn and A356 alloys", 360 (2003) 372-376. https://doi.org/10.1016/S0921-5093(03)00504-5
- M. Karimian, A. Ourdjini, M. H. Idris and H. Jafari, Trans. Nonferrous Met. Soc. China, "Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu alloy casting", 22 (2012) 2092-2097. https://doi.org/10.1016/S1003-6326(11)61433-7
- X.J. Liu, S.H. Bhavnani and R.A. Overfelt, J. Mater. Process. Tech., "Simulation of EPS foam decomposition in the lost foam casting process", 182 (2007) 333-342. https://doi.org/10.1016/j.jmatprotec.2006.08.023
- PANDAT. CompuTherm, LLC, Madison, WI, USA. Available online: http://www.computherm.com
- K.T. Akhil, S. Arul and R. Sellamuthu, Procedia Mater. Sci., "The effect of section size on cooling rate, microstructure and mechanical properties of A356 aluminium alloy in casting", 5 (2014) 362-368. https://doi.org/10.1016/j.mspro.2014.07.278
- S. Sun, B. Yuan and M. Liu, Trans. Nonferrous Met. Soc. China, "Effects of moulding sands and wall thickness on microstructure and mechanical properties of Sr-modified A356 aluminum casting alloy", 22 (2012) 1884-1890. https://doi.org/10.1016/S1003-6326(11)61402-7