참고문헌
- O. Bayer, W. Siefken, H. Rinke, L. Orthner, and H. Schild, "A process for the production of polyurethanes and polyureas", German Patent DRP 728981 (1937).
- "세계 polyurethane 발전 75년사", The polyurethane world, 226 (2012).
- H. W. Engels, H. G. Pirkl, R. Albers, R. W. Albach, J. Krause, A. Hoffmann, H. Casselmann, and J. Dormish, "Polyurethanes: versatile materials and sustainable problem solvers for today's challenges", Angewandte Chemie International Edition, 52, 9422 (2013). https://doi.org/10.1002/anie.201302766
- R. C. Saxena, D. K. Adhikari, and H. B. Goyal, "Biomassbased energy fuel through biochemical routes: a review", Renewable and Sustainable Energy Reviews, 13, 167 (2009). https://doi.org/10.1016/j.rser.2007.07.011
- 장한기, "[특별기고] 고안락성 시트 개발기술 동향",오토저널, 23, 48 (2001).
- D. Y. Kim, J. H. Bang, C. A. Lee, H. Y. Kim, K. Y. Choi, and B. G. Lim, "Numerical evaluation of time-dependent sagging for low density polyurethane foams to apply the long-term driving comfort on the seat cushion design", International Journal of Industrial Ergonomics, (2017), http://dx.doi.org/10.1016/j.ergon.2016.08.010.
- J. S. Oh, D. Y. Kim, T. H. Kim, H. Y. Kim, S. H. Lee, and K. Y. Choi, "Numerical prediction of the viscoelastic deformation of seat foam in response to long-term driving", Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229, 214 (2015).
- R. K. Ippili, P. Davies, A. K. Bajaj, and L. Hagenmeyer, "Nonlinear multi-body dynamic modeling of seat-occupant system with polyurethane seat and H-point prediction" International Journal of Industrial Ergonomics, 38, 368 (2008). https://doi.org/10.1016/j.ergon.2007.08.014
- 박상남, "자동차 시트 기술 개발동향", 오토저널, 31, 26 (2009).
- 정인중, 이원구, 김병훈, "차량 내장재 NVH 분야 기술 동향", 소음.진동, 16, 12 (2006).
-
T. Bürgin, C. Bertolini, D. Caprioli, and C. Müller, "Engine Encapsulation for
$CO_2$ and Noise Reduction", ATZ worldwide, 116, 16 (2014). - S. K. Kim, G. Sung, J. G. Gwon, and J. H. Kim, "Controlled phase separation in flexible polyurethane foams with diethanolamine cross-linker for improved sound absorption efficiency", International Journal of Precision Engineering and Manufacturing-Green Technology, 3, 367 (2016). https://doi.org/10.1007/s40684-016-0046-y
- G. Sung, J. W. Kim, and J. H. Kim, "Fabrication of polyurethane composite foams with magnesium hydroxide filler for improved sound absorption", Journal of Industrial and Engineering Chemistry, 44, 99 (2016). https://doi.org/10.1016/j.jiec.2016.08.014
- A. L. Loureiro, L. F. Da Silva, C. Sato, and M. A. V. Figueiredo, "Comparison of the mechanical behaviour between stiff and flexible adhesive joints for the automotive industry", The Journal of Adhesion, 86, 765 (2010). https://doi.org/10.1080/00218464.2010.482440
- Y. Boutar, S. Naïmi, S. Mezlini, L. F. da Silva, and M. B. S. Ali, "Characterization of aluminium one-component polyurethane adhesive joints as a function of bond thickness for the automotive industry: Fracture analysis and behavior", Engineering Fracture Mechanics, 177, 45 (2017). https://doi.org/10.1016/j.engfracmech.2017.03.044
- V. Jaso, M. Cvetinov, S. Rakic, and Z. S. Petrovic, "Bio-plastics and elastomers from polylactic acid/thermoplastic polyurethane blends", Journal of Applied Polymer Science, 131, 1 (2014).
- Y. J. Jo, S. H. Choi, and E. Y. Lee, "Production of Biopolyols, Bioisocyanates and Biopolyurethanes from Renewable Biomass", Applied Chemistry for Engineering, 24, 579 (2013). https://doi.org/10.14478/ace.2013.1081
- "Trends in White Biotech", Korea Biosafety Clearing House, 70, 1 (2015).
- 민경선, 엄영순, "식물 소재 유래 바이오폴리우레탄 생산", BT news, 18, 21 (2011).
- A. Guo, W. Zhang, and Z. S. Petrovic, "Structure-property relationships in polyurethanes derived from soybean oil", Journal of Materials Science, 41, 4914 (2006). https://doi.org/10.1007/s10853-006-0310-6
- M. N. Belgacem and A. Gandini, "Monomers, polymers and composites from renewable resources", pp.40-43, Elsevier, Netherlands, 2008.
- C. K. Lyon, V. H. Garrett, and L. A. Goldblatt., "Rigid urethane foams from blown castor oils", Journal of the American Oil Chemists' Society, 41, 23 (1964). https://doi.org/10.1007/BF02661896
- M. Kurańska, A. Prociak, M. Kirpluks, and U. Cabulis, "Polyurethane-polyisocyanurate foams modified with hydroxyl derivatives of rapeseed oil", Industrial Crops and Products, 74, 849 (2015). https://doi.org/10.1016/j.indcrop.2015.06.006
- C. S. Carriço, T. Fraga, and V. M. Pasa, "Production and characterization of polyurethane foams from a simple mixture of castor oil, crude glycerol and untreated lignin as bio-based polyols", European Polymer Journal, 85, 53 (2016). https://doi.org/10.1016/j.eurpolymj.2016.10.012
- E. Glowinska and J. Datta, "Bio polyetherurethane composites with high content of natural ingredients: hydroxylated soybean oil based polyol, bio glycol and microcrystalline cellulose", Cellulose, 23, 581 (2016). https://doi.org/10.1007/s10570-015-0825-6
- J. Datta and E. Glowinska, "Effect of hydroxylated soybean oil and bio-based propanediol on the structure and thermal properties of synthesized bio-polyurethanes", Industrial Crops and Products, 61, 84 (2014). https://doi.org/10.1016/j.indcrop.2014.06.050
- M. Besson, P. Gallezot, and C. Pinel, "Conversion of biomass into chemicals over metal catalysts", Chemical Reviews, 114, 1827 (2013).
- M. Xiong, D. K. Schneiderman, F. S. Bates, M. A. Hillmyer, and K. Zhang, "Scalable production of mechanically tunable block polymers from sugar", Proceedings of the National Academy of Sciences, 111, 8357 (2014). https://doi.org/10.1073/pnas.1404596111
- N. V. Gama, B. Soares, C. S. Freire, R. Silva, C. P. Neto, A. Barros-Timmons, and A. Ferreira, "Bio-based polyurethane foams toward applications beyond thermal insulation", Materials & Design, 76, 77 (2015). https://doi.org/10.1016/j.matdes.2015.03.032
- A. A. Hakim, M. Nassar, A. Emam, and M. Sultan, "Preparation and characterization of rigid polyurethane foam prepared from sugar-cane bagasse polyol", Materials Chemistry and Physics, 129, 301 (2011). https://doi.org/10.1016/j.matchemphys.2011.04.008
- Y. Li, Y. Han, T. Qin, and F. Chu, "Preparation of polyurethane foams based on liquefied corn stalk enzymatic hydrolysis lignin", Journal of Biobased Materials and Bioenergy, 6, 51 (2012). https://doi.org/10.1166/jbmb.2012.1197
- S. Hu, X. Luo, and Y. Li, "Polyols and polyurethanes from the liquefaction of lignocellulosic biomass", ChemSusChem, 7, 66 (2014). https://doi.org/10.1002/cssc.201300760
- B. K. Uprety, J. V. Reddy, S. S. Dalli, and S. K. Rakshit, "Utilization of microbial oil obtained from crude glycerol for the production of polyol and its subsequent conversion to polyurethane foams", Bioresource Technology, 235, 309 (2017). https://doi.org/10.1016/j.biortech.2017.03.126
- G. Cayli and S. Kusefoglu, "Biobased polyisocyanates from plant oil triglycerides: Synthesis, polymerization, and characterization", Journal of Applied Polymer Science, 109, 2948 (2008). https://doi.org/10.1002/app.28401
- L. Hojabri, X. Kong, and S. Narine, "Fatty acid-derived diisocyanate and biobased polyurethane produced from vegetable oil: synthesis, polymerization, and characterization", Biomacromolecules, 10, 884 (2009). https://doi.org/10.1021/bm801411w
- A. S. More, T. Lebarbe, L. Maisonneuve, B. Gadenne, C. Alfos, and H. Cramail, "Novel fatty acid based di-isocyanates towards the synthesis of thermoplastic polyurethanes", European Polymer Journal, 49, 823 (2013). https://doi.org/10.1016/j.eurpolymj.2012.12.013
- "Bayer MaterialScience hardener wins award", Reinforced plastic, 59, 171 (2015).
- "A new aliphatic isocyanate polymer designed for extreme low viscosity formulations", Focus on powder coatings, 2013, 6 (2013).
- A. Cornille, R. Auvergne, O. Figovsky, B. Boutevin, and S. Caillol, "A perspective approach to sustainable routes for non-isocyanate polyurethanes", European Polymer Journal, 87, 535 (2017). https://doi.org/10.1016/j.eurpolymj.2016.11.027
- S. Schmidt, B. S. Ritter, D. Kratzert, B. Bruchmann, and R. Mu?lhaupt, "Isocyanate-Free Route to Poly (carbohydrateurethane) Thermosets and 100% Bio-Based Coatings Derived from Glycerol Feedstock", Macromolecules, 49, 7268 (2016). https://doi.org/10.1021/acs.macromol.6b01485
- V. Besse, R. Auvergne, S. Carlotti, G. Boutevin, B. Otazaghine, S. Caillol, and B. Boutevin, "Synthesis of isosorbide based polyurethanes: An isocyanate free method", Reactive and Functional Polymers, 73, 588 (2013). https://doi.org/10.1016/j.reactfunctpolym.2013.01.002
- F. Fenouillot, A. Rousseau, G. Colomines, R. Saint-Loup, and J. P. Pascault, "Polymers from renewable 1,4: 3,6-dianhydrohexitols (isosorbide, isomannide and isoidide): A review", Progress in Polymer Science, 35, 578 (2010). https://doi.org/10.1016/j.progpolymsci.2009.10.001
- R. J. Kieber, S. A. Silver, and J. G. Kennemur, "Stereochemical effects on the mechanical and viscoelastic properties of renewable polyurethanes derived from isohexides and hydroxymethylfurfural" Polymer Chemistry, 8, 4822 (2017). https://doi.org/10.1039/C7PY00949F
- S. Oprea, V. O. Potolinca, and V. Oprea, "Synthesis and properties of new crosslinked polyurethane elastomers based on isosorbide", European Polymer Journal, 83, 161 (2016). https://doi.org/10.1016/j.eurpolymj.2016.08.020
- F. Xianhong, R. DeMartino, A. J. East, W. B. Hammond, and M. Jaffe, "Synthesis and characterization of isosorbide derived polyols as highly effective humectants", Bioengineering conference: Proceedings of the 2010 IEEE, 36, 26 (2010).
- 이대수, "이소소바이드(isosorbide)를 이용한 폴리우레탄", The Polyurethane World, 266 (2015).
- H. N. Kim and D. S. Lee, "Recycling of Polyurethane Scraps", Elastomers and Composites, 47, 104 (2012). https://doi.org/10.7473/EC.2012.47.2.104
- P. Berthevas, F. Aguirre, and J. Tu, "Recent developments in the recycling of flexible PU foams back into new PU foam products", pp.17-32, Proc. of Polyurethanes Expo2001, Columbus, 2001.
- S. Ghose and A. I. Isayev, "Continuous process for recycling of polyurethane foam", Journal of Cellular Plastics, 40, 167 (2004). https://doi.org/10.1177/0021955X04043717
- S. Ghose and A. I. Isayev, "Recycling of unfilled polyurethane rubber using high-power ultrasound", Journal of Applied Polymer Science, 88, 980 (2003). https://doi.org/10.1002/app.11740
- R. Zevenhoven, "Treatment and disposal of polyurethane wastes: options for recovery and recycling", pp.30, Energy Engineering and Environmental Protection Publications, Espoo, 2004.
- K. M. Zia, H. N. Bhatti, and I. A. Bhatti, "Methods for polyurethane and polyurethane composites, recycling and recovery: a review", Reactive and Functional Polymers, 67, 675 (2007). https://doi.org/10.1016/j.reactfunctpolym.2007.05.004
- P. Kopczynska, T. Calvo-Correas, A. Eceiza, and J. Datta, "Synthesis and characterisation of polyurethane elastomers with semi-products obtained from polyurethane recycling", European Polymer Journal, 85, 26 (2016). https://doi.org/10.1016/j.eurpolymj.2016.09.063
- 이현욱, 하진욱, 김도영, 차상언, "휘발성 유기화합물질 저감 및 착좌감 향상 자동차용 연질 폴리우레탄 폼 개발", 한국자동차공학회 춘계학술대회, 1096 (2017).
- 김기원, 공용식, 유환조, "컴포트가 향상된 복판형 시트 백 프레임", KR 10-2012-0140352 A (2011).
- S. H. Kim, J. S. Oh, H. W. Jeon, and S. H. Seo, "Polyurethane compositions for an automotive seat", U.S. patent 8906976 B2 (2012).
- 오정석, 곽성복, "일반총설: 자동차 내장부품용 바이오 고분자: 바이오 폴리우레탄", 고무기술, 16, 75 (2015).
- "Kia Soul EV achieves UL Environment Validation for biobased organic carbon content for 10% of its interior plastic", Green Car Congress (2014).
- 이성훈, 임병국, 최권용, 이현종, 정순준, 손태환, 한영훈, "포름알데하이드 및 아크롤레인의 방출이 저감된 폴리우레 탄 폼", KR 10-2017-0090763 A(2017).
- "SKC 자동차 서스펜션, 내년 완성차 적용", The Polyurethane World, 269 (2015).
- 이호경, 윤준영, "2액형 무용제 폴리우레탄 접착제를 적용한 인공피혁의 제조방법", KR 10-2017-0057546 A (2017).