DOI QR코드

DOI QR Code

프탈로시아닌계 안료의 함산소불소화가 수분산 특성에 미치는 영향

Effect of Oxyfluorination on Water Dispersion of Phthalocyanine Pigment

  • 이민규 (경북대학교 섬유시스템공학과) ;
  • 배진석 (경북대학교 섬유시스템공학과) ;
  • 김태경 (경북대학교 섬유시스템공학과) ;
  • 안승현 ((주)잉크테크) ;
  • 정민정 (충남대학교 응용화공학부) ;
  • 이영석 (충남대학교 응용화공학부) ;
  • 정의경 (경북대학교 섬유시스템공학과)
  • Lee, Min Kyu (Department of Textile System Engineering, Kyungpook National University) ;
  • Bae, Jin-Seok (Department of Textile System Engineering, Kyungpook National University) ;
  • Kim, Taekyeong (Department of Textile System Engineering, Kyungpook National University) ;
  • An, Seung-Hyun (InkTec Co., Ltd.) ;
  • Jung, Min-Jung (Department of Chemical Engineering and Applied Chemistry) ;
  • Lee, Young-Seak (Department of Chemical Engineering and Applied Chemistry) ;
  • Jeong, Euigyung (Department of Textile System Engineering, Kyungpook National University)
  • 투고 : 2017.11.12
  • 심사 : 2017.12.18
  • 발행 : 2017.12.27

초록

To study the effect of oxyfluorination on water dispersion of phthalocyanine blue(C.I. pigment blue 15:3), the pigment was oxyfluorinated using various oxygen to fluorine ratio of the reactant gas. After the oxyfluorination of the phthalocyanine blue pigment, no significant change in FT-IR spectra was observed, whereas XPS spectra showed the introduction of oxygen and fluorine containing functional groups. This suggests that the oxyfluorination of the pigment only occurred on the surface of the pigment particle and resulted in no significant change in UV-Vis spectra of the pigment. However, the oxyflurinated pigments showed improved water dispersion, compared to the non-treated pigment. Especially, when the oxygen to fluorine ratio was 47:3, the water dispersion of the oxyfluorinated pigments significantly increased, compared to the non-treated pigments. This suggests that the oxyfluorination of the phthalocyanine blue pigment has a potential to be used as a water dispersion improving method.

키워드

참고문헌

  1. http://www.vtt.fi/inf/julkaisut/muut/2014/VTT-CR-04462-14.pdf, 2017.08.01.
  2. D. S. Jeong and T. I. Chun, Color Fastness of Digital Textile Printing on Silk Fabrics: The Effect of the Mixed Pre-treatment Agent, J. of the Korean Society of Clothing Industry, 12(5), 808(2013).
  3. Y. S. Chung, A Comparative Study of Digital Textile Printing and Traditional Screen Printing, J. of Korean Society Design Science, 6(2), 49(2004).
  4. S. H. Lee, D. S. Jeong, and T. I. Chun, Effect of Pre-treatment Agents on the Digital Textile Printing of Silk Fabric, Textile Coloration and Finishing, 23(4), 263 (2011). https://doi.org/10.5764/TCF.2011.23.4.263
  5. S. Y. Park, D.W. Jeon, Y.C. Park, and B. S. Lee, Effects on Printing Quality according to Yarn Twist and Knitting Structure of Media in Digital Textile Printing(I), Textile Coloration and Finishing, 22(3), 282(2010). https://doi.org/10.5764/TCF.2010.22.3.282
  6. S. B. Ki, H. J, Seo, J. P. Hong, S. H. Yoon, and K. Shin, Research of Possibility of Carrageenan as DTP Pre-treatment Thickening Agent for Cellulosic Fabric, Textile Coloration and Finishing, 27(4), 318(2015). https://doi.org/10.5764/TCF.2015.27.4.318
  7. K. H. Eorm and M. H. Cho, A Study on the Application of Digital Transfer Printing -Focused on the Full Width of Minhwa Wallpaper Design-, J. of Korean Society of Design Culture, 11(4), 118(2005).
  8. M. H. Cho, A Study on Optimal Transfer Conditions for Sublimation Transfer Digital Textile Printing, The Korean Society of Fashion Design, 10(4), 59(2010).
  9. M. M. Marie, Y. H. El-Hamaky, D. Maamoun, D. F. Ibrahim, and S. M. Abbas, Pigment Ink Formulation for Inkjet Printing of Different Textile Materials, Internationnal J. of Innovation and Applied Studies, 4(1), 239(2013).
  10. C. Yoon and J. H. Choi, Syntheses of Polymeric Dispersants for Pigmented Ink-jet Inks, J. of the Society of Dyers and Colourists, 124, 355(2008).
  11. S. Lelu, C. Novat, C. Graillat, A. Guyot, and E. Bourgeat-Lami, Encapsulation of an Organic Phthalocyanine Blue Pigment into Polystyrene Latex Particles using a Miniemulsion Polymerization Process, Polymer International, 52(4), 542(2003). https://doi.org/10.1002/pi.1029
  12. B. Kim, J. Jeong, A. K. Mohanty, T. Lee, S. Han, J. Heo, K. S. Jung, J. Kum, and H. Paik, Quaternized Poly (poly(ethylene glycol)methyl ether methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate) as Block Copolymers by Sequential Monomer Addition: Dispersion of Copper Phthalocyanine, Reactive and Functional Polymers, 120, 127(2017).
  13. M. Gsanger, D. Bialas, L. Huang, M. Stolte, and F. Wurthner, Organic Semiconductors Based on Dyes and Color Pigments, Advanced Materials, 28(19), 3615 (2016). https://doi.org/10.1002/adma.201505440
  14. M. Anghelone, D. Jemrith-Simburger, V. Pintus, and M. Schreiner, Photostability and Influence of Phthalocyanine Pigments on the Photodegradation of Acrylic Paints under Accelerated Solar Radiation, Polymer Degradation and Stability, 146, 13(2017). https://doi.org/10.1016/j.polymdegradstab.2017.09.013
  15. E. Jeong, T. S. Bae, S. M. Yun, S. W. Woo, and Y. S. Lee, Surface Characteristics of Low-density Polyethylene Films Modified by Oxyfluorination-assisted Graft Polymerization, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 373(1-3), 36(2011). https://doi.org/10.1016/j.colsurfa.2010.10.008
  16. J. Yun, J. S. Im, Y. S. Lee, and H. I. Kim, Effect of Oxyfluorination on Electromagnetic Interference Shielding Behavior of MWCNT/PVA/PAAc Composite Microcapsules, European Polymer J., 46(5), 900(2010). https://doi.org/10.1016/j.eurpolymj.2010.02.005
  17. H. R. Yu, J. G. Kim, J. S. Im, T. S. Bae, and Y. S. Lee, Effects of Oxyfluorination on a Multi-walled Carbon Nanotube Electrode for a High-performance Glucose Sensor, J. of Industrial and Engineering Chemistry, 18(2), 674(2012). https://doi.org/10.1016/j.jiec.2011.11.064
  18. J. Yun, J. S. Im, H. I. Kim, and Y. S. Lee, Effect of Oxyfluorination on Gas Sensing Behavior of Polyaniline-coated Multi-walled Carbon Nanotubes, Applied Surface Science, 258(8), 3462(2012). https://doi.org/10.1016/j.apsusc.2011.11.098
  19. S. M. Yun, S. W. Woo, E. Jeong, B. C. Bai, I. J. Park, and Y. S. Lee, Effects of Oxyfluorination on Surface Graft Polymerization of Low Density Polyethylene Film and its Surface Characteristics, Applied Chemistry and Engineering, 21(3), 343(2010).
  20. J. W. Lim, J. M. Lee, S. M. Yun, B. J. Park, and Y. S. Lee, Hydrophilic Modification of Polyacrylonitrile Membranes by Oxyfluorination, J. of Industrial and Engineering Chemistry, 15(6), 876(2009). https://doi.org/10.1016/j.jiec.2009.09.016