한국압력기기공학회 논문집 (Transactions of the Korean Society of Pressure Vessels and Piping)

한국압력기기공학회 (Korean Society of Pressure Vessels and Piping)
권호 표지
DOI QR코드

DOI QR Code

동적 시간이력 탄소성 지진 해석을 위한 레일레이 감쇠계수 결정방법 고찰

Investigation on the Determination Method of Rayleigh Damping Coefficients for Dynamic Time History Elastic-Plastic Seismic Analysis

  • 투고 : 2017.10.27
  • 심사 : 2017.12.14
  • 발행 : 2017.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper investigates how to determine the Rayleigh damping coefficients for dynamic time history seismic analysis of piping systems. Three methods are applied. The first one is a conventional method to use the natural frequencies of the mode 1 and 2, derived from dynamic analysis. The second method is to determine the Rayleigh damping coefficients based on frequency range of the acceleration histories. The last one is a iterative transient response analysis method using the transient analysis results without and with damping. It is found that the conventional method and the iterative transient response method yield the same results whereas the acceleration frequency-basis method provides more conservative result than the other methods. In addition, it is concluded that the iterative transient response method is recommended.

키워드

참고문헌

  1. G. DeGrassi, J. Nie, and C. Hofmayer, 1999, "Seismic Analysis of Large-Scale Piping Systems for the JNES-NUPEC Ultimate Strength Piping Test Program," NUREG/CR-6983, Office of Nuclear Regulatory Research.
  2. US NRC, 2011, "Near-Term Report and Recommendations for Agency Actions Following the Events in Japan."
  3. K. Iwata, Y. Karakida, C. Jin, H. Nakamura, and N. Kasahara, 2015, "Multilayer kinematic hardening model for carbon steel and its application to inelastic analyses of an elbow subjected to cyclic in-plane bending," Proceedings of ASME PVP 2015, PVP2015-45853.
  4. A. Ravikiran, P. N. Dubey, M. K. Agrawal, G. R. Reddy, R. K. Singh, K. K. Vaze, 2015, "Experimental and Numerical studies of Ratcheting in a Pressurized Piping System under Seismic Load", Journal of Pressure Vessel Technology.
  5. Hough, S.E. 2004, "Finding fault in California: an earthquake tourist's guide. Mountain Press Publishing," ISBN 978-0-87842-495-5, p. 185.
  6. Ye Ji Kim, 2014, "Seismic Integrity Characteristics of Uncracked and Through Wall Circumferential Cracked Pipes under Beyound Basis Earthquake," Seoul National Uiversity.
  7. Jong Sung Kim, Seok Hyun Lee, Hyeong Do Kweon, 2017.2, KSME Spring Conference, pp 96-96
  8. Dassault Systemes Simulia Corp, 2013, "Abaqus 6.13 Analysis User's Manual,"
  9. Chaboche, K. Dang-Vang, G. Cordier, 1979, "Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel," Proceedings of 5th International Conference on SMiRT, Div. L, Berlin Germnay
  10. Draft regulatory guide DG-1157 (Proposed Revision 1 of Regulatory Guide 1.61, dated October 1973) Damping values for seismic design of nuclear power plants.