DOI QR코드

DOI QR Code

A Study on Bonding Process for Improvement of Adhesion Properties Between CFRP-Metal Dual Materials

CFRP/금속간 접합력 강화를 위한 접합공정 연구

  • Kwon, Dong-Jun (Polymer Resin Team, Hybrid New Material Division, Korea Dyeing and Finishing Technology Institute) ;
  • Park, Sung-Min (Polymer Resin Team, Hybrid New Material Division, Korea Dyeing and Finishing Technology Institute) ;
  • Park, Joung-Man (Department of Materials Engineering and Convergence Technology, Research Institute for Green Energy Convergence Technology, Gyeongsang National University) ;
  • Kwon, Il-Jun (Polymer Resin Team, Hybrid New Material Division, Korea Dyeing and Finishing Technology Institute)
  • Received : 2017.11.03
  • Accepted : 2017.12.26
  • Published : 2017.12.31

Abstract

The structural adhesive have been manufactured for improvement of bonding process between CFRP and metal. The optimal condition for bonding process were investigated by evaluating the lap shear strength with amount of adhesive and curing time and the surface treatment of the CFRP. To confirm proper adhesion conditions, the fracture sections between CFRP and metal was observed using reflection microscope. Not only the improvement of the adhesion condition was important, but surface treatment on CFRP was also important. The optimal curing temperature was at $180^{\circ}C$ for 20 minutes. The improvement for adhesive property was confirmed After surface treatment on CFRP. The optimal amount of structural adhesive for bonding between CFRP and metal was $1.5{\times}10^{-3}g/mm^2$. Through the optimization of bonding process, the improvement of mechanical property over 10% is confirmed in comparison with existing adhesive.

CFRP와 금속간의 접합공정이 개선된 구조용 접착제가 제조되었다. 구조용 접착제에 대한 경화시간, 기지재료의 표면상태 그리고 접착제의 양에 따른 최적의 접합공정 조건을 랩쉐어 실험을 통하여 파악하였다. 적합한 접합조건을 확인하기 위해 이종재료간의 접합 파단면 상태를 반사현미경을 이용하여 평가하였다. 이종재료간 접합력 향상을 위해 접착제의 개선뿐만 아니라 CFRP의 표면처리 또한 중요하였다. 구조용 접착제의 경우 180도 조건에 20분의 경화온도 조건이 최적이였으며, CFRP의 표면 처리에 따라 접합특성이 향상됨을 확인하였다. 이종재료 간 접합을 위해 구조용 접착제의 양은 $1.5{\times}10^{-3}g/mm^2$ 조건일 때 최적이었다. 접합공정의 개선 및 최적화를 통해 기존의 접착력 대비 10% 이상의 물성 강화를 나타냄을 확인하였다.

Keywords

References

  1. Wang, Z.J., Kwon, D.J., Park, J.K., Lee, W.I., and Park, J.M., "Microstructure and Ablation Performance of CNT-Phenolic Nanocomposites", Composites Research, Vol. 26, No. 5, 2013, pp. 309-314. https://doi.org/10.7234/composres.2013.26.5.309
  2. Shin, D.W., Kim, J.J., Lee, J.H., Kwon, I.J., and Park, S.M., "Evaluation on the Effect of Beads for Adhesive Improvement of CFRP and Aluminum", Composites Research, Vol. 30, No. 4, 2017, pp. 254-260. https://doi.org/10.7234/COMPOSRES.2017.30.4.254
  3. Wang, B., Bai, Y., Hu, X., and Lu, P., "Enhanced Epoxy Adhesion between Steel Plates by Surface Treatment and CNT/ Short-Fibre Reinforcement", Composites Science and Technology, Vol. 127, 2016, pp. 149-157. https://doi.org/10.1016/j.compscitech.2016.03.008
  4. Lee, B.E., Park, E.T., Ko, D.C., Kang, B.S., and Song, W.J., "Evaluation of Fracture Behavior of Adhesive Layer in Fiber Metal Laminates using Cohesive Zone Models", Composites Research, Vol. 29, No. 2, 2016, pp. 45-52. https://doi.org/10.7234/composres.2016.29.2.045
  5. Shin, P.S., Kim, J.H., Choi, J.Y., Kwon, D.J., Lee, S.I., and Park, J.M., "Comparison of Mechanical and Interfacial Properties on Chemical Structures of Acrylic and Epoxy Adhesives", Composites Research, Vol. 29, No. 2, 2016, pp. 79-84. https://doi.org/10.7234/composres.2016.29.2.079
  6. Lee, K.J., "Recent Research & Development Trend on Friction Stir Welding and Friction Stir Processing", Journal of KWJS, Vol. 31, No. 2, 2013, pp. 26-29.
  7. Moisala, A., Li, Q., Kinloch, I.A., and Windle, A.H., "Mechanical Properties and Microstructure on Dissimilar Friction-Stir-Weld of Aluminium Alloys", Journal of the Korean Society of Marine Engineering, Vol. 35, No. 1, 2011, pp. 75-81. https://doi.org/10.5916/jkosme.2011.35.1.075
  8. Kim, T.G., Kyung, D.S., Son, U.C., and Park, S.Y., "Measurements of Defects after Machining CFRP Holes Using High Speed Line Scan", Journal of the Korean Society for Precision Engineering, Vol. 33, No. 6, 2016, pp. 459-467. https://doi.org/10.7736/KSPE.2016.33.6.459
  9. Kim, D.Y., Kim, H.S., and Kim, J.H., "Evaluation on Effect of Hole Machining for Application of M1.0 Subminiature Screw to CFRP Laminate Using FEM", Journal of the Korean Society for Precision Engineering, Vol. 34, No. 2, 2017, pp. 95-99. https://doi.org/10.7736/KSPE.2017.34.2.95
  10. Hwang, Y.E., and Yoon S.H., "Effect of Combined Environmental Factors on Adhesive Shear Strengths and Chemical Structures of Adhesives", Composites Research, Vol. 24, No. 1, 2011, pp. 31-36. https://doi.org/10.7234/kscm.2011.24.1.031
  11. Tang, Y.J., Alva, G., Huang, X. Su, D., Liu, L., and Fang, G., "Thermal Properties and Morphologies of MA-SA Eutectics/ CNTs as Composite PCMs in Thermal Energy Storage", Energy and Buildings, Vol. 127, 2016, pp. 603-610. https://doi.org/10.1016/j.enbuild.2016.06.031
  12. Jang, J.H., Sung, M.C., and Yu, W.R., Numerical Simulation of the Delamination Behavior of Polymeric Adhesive Tapes Using Cohesive Zone Element", Composites Research, Vol. 29, No. 4, 2016, pp. 203-208. https://doi.org/10.7234/composres.2016.29.4.203
  13. Kil, M.G., Park E.T., Song, W.J., and Kang B.S., "Study on Enhancement for Interfacial Energy Release Rate of Adhesive Layer in Fiber Metal Laminates using Taguchi Method", Composites Research, Vol. 29, No. 5, 2016, pp. 249-255. https://doi.org/10.7234/composres.2016.29.5.249
  14. Kim, J.H., Kwon, D.J., Shin, P.S., Beak, Y.M., Park, H.S., Moon, S.O., and Park, J.M., "Improvement on Interfacial, Thermal, and Water Resistance Properties of Wood Sandwich Composites for Stone Bed using CNT-Animal Glue Adhesive", Composites Research, Vol. 30, No. 4, 2017, pp. 235-240. https://doi.org/10.7234/COMPOSRES.2017.30.4.235

Cited by

  1. 탄소복합재 접착공정을 위한 CFRP의 레이저 표면처리 기법의 적용 vol.33, pp.6, 2017, https://doi.org/10.7234/composres.2020.33.6.371